• Restorative Dentistry and Endodontics
• /
• 제12권1호
• /
• pp.39-49
• /
• 1986

The purpose of this study was to observe characteristic properties through the polarization curves and SEM images from 4 different types of amalgam obtained by using the potentiostats (Princeton EG & G) & SEM (Jeol/35), and to investigate the degree of corrosion on the oxidation peak of the each phase of amalgam. After each amalgam alloy and Hg was triturated as the direction of the manufacturer by means of the mechanical amalgamator (Shofu Co.), the triturated mass was inserted into the cylindrical metal mold which was 12mm in diameter and 10.0mm in height and was condensed by using routine manner. The specimen was removed from the mold and stored at room temperature for about 24 hours. The standard surface preparation was routinely carried out. Anodic polarization measurement was employed to confirm the corrosion behaviour of the amalgams in a 0.9% saline solution (P.H: 6.8-7.0) at $37^{\circ}C$. The initial rest potential (corrosion potential) was determined after 30 minutes of immersion of specimen in electrolyte, and the potential scan was begun at the point of 100mV cathodic from the corrosion potential. The scan rate was 0.17mV/sec. in the study to observe the degree of corrosion of each phase. SEI and EPMA images on the determined oxidation peaks of each amalgam were observed. The results were as follows: 1. In the four anodic polarization curves, low copper amalgams have three oxidation peaks and high copper amalgams have two oxidation peaks, -270mV, +26mV and +179mV(SEC) in the low copper lathe cut, and -300mV, +39mV and +163mV(SEC) in the low copper spherical. -4mV and +154mV(SEC) in the Dispersalloy, and +17mV and +180mV(SEC) in the Tytin as high copper amalgams. 2. ${\gamma}_2$ phase in the low copper amalgam and ${\eta}$ phase in the high copper amalgam were the most corrodible phases and Ag-Cu eutectic in high copper amalgam was the most slowly corroded phase. 3. Low copper amalgam was more susceptible in corrosion than high copper amalgam.

• Restorative Dentistry and Endodontics
• /
• 제16권2호
• /
• pp.18-32
• /
• 1991

The purpose of this study was to observe characteristic properties of amalgam through the polarization curves and SEM images from 4 type amalgams (Amalcap, Shofu spherical. Dispersalloy and Tytin) with 3 different surface finish procedures (polishing, burnishing and carving) by using the potentiostats (EG & GPARC) and SEM (Jeol JSM-35). After each amalgam alloy and Hg was triturated as the direction of the manufacturer by means of mechanical amalgamator (Samki), the triturated mass was inserted into the cylndrical metal mold which was 12 mm in diameter and 10 mm in height and was pressed with $100kg/cm^2$. 4 specimens of each type amalgam were burnished with egg burnisher and another 4 specimens of each type amalgam were carved with Hollenback carver. Above 8 specimens and remaining untreated 4 specimens were stored at room temperature for about 7 days. Untreated 4 specimens of each type amalgam were polished with abrasive papers (Deer) from #400 to #1200 and finally on the polishing cloth with $0.5{\mu}m$ and $0.06{\mu}m$ $Al_2O_3 $ powder suspended water. Anodic polarization measurements was employed to compare the corrosion behaviours of the amalgams in 0.9% saline solution at $37^{\circ}C$. The open circuit potential was determined after 30 minutes immersion of specimen in electrolyte. The scan rate was 1 mV/sec and the surface area of amalgam exposed to the solution was $0.64cm^2$ for each specimen. All the potentials reported are with respect to a saturated calomel electrode (SCE). SEM images of each specimen were taken after + 800 mV (SCE) polarization. The results were as follows: 1. The corrosion potential of high copper amalgam was more anodic than that of low copper amalgam. 2. The polished amalgam were more resistant to corrosion than any other burnished and carved amalgam. 3. In the case of polishing, current density of high copper amalgam was lower than that of low copper amalgam.

• 한국건설순환자원학회논문집
• /
• 제5권4호
• /
• pp.345-352
• /
• 2017

중량 콘크리트는 고파랑에 대한 저항성 상승을 위해 해양 구조물에 사용될 수 있다. 그러나 중량 콘크리트를 제조하기 위해 필수적인 재료인 중량 골재는 대량 공급이 어려우며, 고가이므로 사용이 제한되고 있다. 따라서 본 연구에서는 산업부산물인 동슬래그 및 제강슬래그의 해양 콘크리트용 중량 골재로써 활용성을 평가하였다. 실험 결과 동슬래그는 수침팽창 및 알칼리 실리카반응성이 안정적인 것으로 나타나 해양 콘크리트용 중량 골재로서 활용이 가능할 것으로 판단된다. 그러나 제강슬래그는 수침팽창 및 ASTM C 1260 시험에서 높은 팽창율을 보였다. 또한 콘크리트 내 제강슬래그가 위치한 곳에서 염화물 이온이 깊게 침투한 것이 발견되었다. 따라서 제강슬래그는 해양 콘크리트 구조물의 골재로서는 부적합한 것으로 사료된다.

• Journal of the Korean Wood Science and Technology
• /
• 제19권4호
• /
• pp.7-17
• /
• 1991

The feasibility of treating three softwood(Japanese larch pitch pine, and Korean pine) thinned logs by double-diffusion treatment processes was investigated. Some posts were incised before immersion, and others were imersed in hot copper sulfate solution. Comparison among species indicated that. in general, pitch pine was most treatable and Japanese larch least treatable. For all three species, almost all treatment schedules gave consistently good penetration and high net retention, but very steep gradient of preservative distribution. As expected, the treatability was increased by the extension of immersion time, increased concentration of treating solution, incising. and heating of the first solution. Of the variables tested, it appears that heating of the first solution is the most important. From the data in this paper, it may be concluded that, if the first solution is not heated, the best schedule is #3. If the first solution is healed. it appears the best schedules are #10 or #11. Since heating of the first solution improves the treatability. schedules # 10 or :#11 are recommended if the cost of heating might be justified. The data presented in this paper indicate that double-diffusion treatment processes seem to offer a promise as a comparatively effective and easy-operating method of treating thinned logs for the small-scale production of treated stock.

• 대한화학회지
• /
• 제28권2호
• /
• pp.86-94
• /
• 1984

${\beta}-Ag_3SI$의 단결정을 만들어 막전극으로의 응용을 살펴보았다. 그 결과 할로겐 이온들에 대해 감응함을 알았고, 분리용액법과 혼합용액법으로 할로겐 이온들에 대한 선택계수를 얻어 이론값과 비교검토 하였으며, 전위시간 곡선으로 부터 이 전극이 유리 전극기구에 의해 전도함을 알았고, 넓은 pH 범위에서 전위가 일정한 값을 가짐을 알았다. 한편 분석화학에의 응용을 살펴 본 결과 할로겐이온의 혼합용액에서 좋은 지시전극으로 사용할 수 있음을 알았다

• Transactions on Electrical and Electronic Materials
• /
• 제10권3호
• /
• pp.71-74
• /
• 2009

Electroplated Cu is a cost efficient metallization method in microelectronic packaging applications. Typically in 3-D chip staking technology, utilizing through silicon via (TSV), electroplated Cu metallization is inevitable for the throughput as well as reducing the cost of ownership (COO).To achieve a comparable film quality to sputtering or CVD, a pre-cleaning process as well as plating process is crucial. In this research, atmospheric plasma is employed to reduce the usage of chemicals, such as trichloroethylene (TCE) and sodium hydroxide (NaHO), by substituting the chemical assisted organic cleaning process with plasma surface treatment for Cu electroplating. By employing atmospheric plasma treatment, marginally acceptable electroplating and cleaning results are achieved without the use of hazardous chemicals. The experimental results show that the substitution of the chemical process with plasma treatment is plausible from an environmentally friendly aspect. In addition, plasma treatment on immersion Sn/Cu was also performed to find out the solderability of plasma treated Sn/Cu for practical industrial applications.

• 마이크로전자및패키징학회지
• /
• 제21권2호
• /
• pp.79-84
• /
• 2014

Citric acid 함유 diethylene glycol 용매 기반 용액의 치환 은도금 특성을 분석하기 위하여 Cu 박막 시편을 사용한 상온~$50^{\circ}C$ 온도 범위에서의 도금을 실시하였다. 사용된 Cu 박막 시편은 스퍼터링된 Cu를 과에칭하여 다수의 핀홀이 형성된 상태로 사용하였다. 도금을 $40^{\circ}C$에서 실시한 경우 갈바닉 치환 반응이 주로 발휘되면서 5분간의 도금 후에는 Cu 표면의 핀홀들이 완전히 Ag로 채워지고 Cu 표면도 전면적으로 Ag로 도금된 결과를 관찰할 수 있어 가장 우수한 Ag도금 특성을 얻을 수 있었다. 이후 도금 시간을 30분까지 증가시키게 되면 용액 내 환원 반응을 통한 입자들의 증착이 진행되면서 Ag 도금부의 요철이 점차 심해지는 현상이 관찰되었다. 전면적이 Ag로 도금된 Cu 시편의 대기 중 고온 내산화성을 평가한 결과 Ag가 도금되지 않은 Cu 시편에 비해 약 $50^{\circ}C$ 정도가 높은 온도에서 산화 거동이 관찰되어 향상된 내산화 특성을 확인할 수 있었다.

• 한국어병학회지
• /
• 제6권2호
• /
• pp.219-231
• /
• 1993

The author introduces the preventive and therapeutic methods of diseases in Japanese flounder which have been conducted by the Fish Disease Laboratory, the Mikamewan Fishery Cooperative Union, Ehime Prefecture, since 1982. Prevention 1. Addition of a sand substrate in the culture pond was effective to prevent ulcer disease. 2. Bathing in 0.5ppm of copper ion was effective to prevent some parasites. 3. Low stocking density of the fish reduced an incidence of edwardsiellosis or gliding bacterial disease. 4. Removal of the diseased fish prevented thd spread of lyphoeystis. 5. So-called $\pi$-water was effective to prevent the fry from some diseases. 6. Immersion of the juvenile in a sodium nifrusylate solution during transportation was effective to prevent gliding bacterial disease. Therapy 1. Sodium nifrustylate or oxytetracycline was effective to cure gliding bacterial disease. 2. Bathing in formalin(150ppm) or freshwater was effective to cure scuticociliatidosis. 3. Erythromycin was effective to cure $\beta$-hemolytic Streptococcus sp. infection. 4. Bathing in a hydrogen peroxide solution(1.5%) was effective to cure white spot disease.

• 한국군사과학기술학회지
• /
• 제18권5호
• /
• pp.548-557
• /
• 2015

This paper is results on Chemisorption of organic compound for the sea water fire fighting line of naval vessels. The quantitative analysis of Chemisorption has been investigated in seawater after immersion in 0.1 % of NaDDTC solutions for 43 hours. The morphology and topography were investigated by FE-SEM and AFM. The chemical elements were analyzed by SEM-EDS, XPS and the depth of chemical elements was measured by depth profiles. The effect of NaDDTC comes from Chemisorption between Copper and Sulfur of NaDDTC. As a result, test results showed that sulfur is helpful to protect a corrosion of seawater line.

• 한국전기전자재료학회논문지
• /
• 제16권12호
• /
• pp.1136-1141
• /
• 2003

The primary insulation materials used in an oil filled transformer are kraft paper, wood, porcelain and oil. Modern transformers use chemically treated paper to improve its tensile strength and resistance to aging caused by immersion in oil. But these insulation papers are mainly aged by thermal stress. Over the life time of the insulation paper and oil, it is exposed to high temperatures, oxygen and water. Its interaction with the steel of the tank and core plus the copper and aluminium of the windings will eventually cause the chemical properties of the oil to decay. High temperature have an effect on mechanical strength of cellulous paper used in the layer insulation. We made two aging cells in which insulation papers and mineral oil are conducted to test thermal properties. It is measured dielectric strength, number of acid, moisture, etc. of insulation paper and oil aged in the aging cells.