• Journal of the Korea Concrete Institute
• /
• v.26 no.1
• /
• pp.71-78
• /
• 2014

The long term integrity of concrete cask is very important for spent nuclear fuel dry storage system. However, there are serious concerns about early deterioration of concrete cask from creaking and corrosion of reinforcing steel by chloride ion because the cask is usually located in seaside, expecially by combined deterioration such as chloride ion and heat, carbonation. This study is to investigate the relation between temperature and chloride ion diffusion of concrete. Immersion tests using 3.5% NaCl solution that were controlled in four level of temperature, i.e. 20, 40, 65, and $90^{\circ}C$, were conducted for four months. The chloride ion diffusion coefficient of concrete was predicted based on the results of profiles of Cl- ion concentration with the depth direction of concrete specimens using the method of potentiometric titration by $AgNO_3$. Test results indicate that the diffusion coefficient of chloride ion increases remarkably with increasing temperature, and there was a linear relation between the natural logarithm values of the diffusion coefficients and the reciprocal of the temperature from the Arrhenius plots. Activation energy of concrete in this study was about 46.6 (W/C = 40%), 41.7 (W/C = 50%), 30.7 (W/C = 60%) kJ/mol under a temperature of up to $90^{\circ}C$, and concrete with lower water-cement ratio has a tendency towards having higher temperature dependency.

• Journal of the Korea Concrete Institute
• /
• v.15 no.1
• /
• pp.117-124
• /
• 2003

Reinforced concrete structures under sever conditions such as marine structures, bridges and structures constructed with aggregates(dredged from sea), can be deteriorated from corrosion of the reinforcing bars. The purpose of this study is to evaluate the anti-corrosive performance of coated steel using polymer cement slurry. Polymer cement slurry with various polymer dispersions and corrosion inhibiting agent were coated to the surface of bars, and tested for accelerated corrosion tests. Tests include immersion in NaCl 10% solution, chloride ion spray, autoclave cure, autoclave cure after carbonation, penetration of NaCl 10 % solution, carbonation after penetration of NaCl 10% solution. Test results, show that the anti-corrosive performace is considerably improved by using polymer cement slurry at surface of steel. And this trend is marked by adding of corrosion inhibiting agent. This difference of the anti-corrosive properties is hardly recognized according to types of polymer dispersions. The coated steel using polymer cement slurry will be improved to a great extent compared to those of plain steel when increasing content of chloride ion in cement concrete.

• International Journal of Oral Biology
• /
• v.37 no.1
• /
• pp.1-7
• /
• 2012

Opioid receptors have been pharmacologically classified as ${\mu}$, ${\delta}$, ${\kappa}$ and ${\varepsilon}$. We have recently reported that the antinociceptive effect of morphine (a ${\mu}$-opioid receptor agonist), but not that of ${\beta}$-endorphin (a novel ${\mu}/{\varepsilon}$-opioid receptor agonist), is attenuated by whole body irradiation (WBI). It is unclear at present whether WBI has differential effects on the antinociceptive effects of ${\mu}-$, ${\delta}-$, ${\kappa}-$ and ${\varepsilon}$-opioid receptor agonists. In our current experiments, male ICR mice were exposed to WBI (5Gy) from a $^{60}Co$ gamma-source and the antinociceptive effects of opioid receptor agonists were assessed two hours later using the hot water ($52^{\circ}C$) tail-immersion test. Morphine and $D-Ala^2$, $N-Me-Phe^4$, Gly-olenkephalin (DAMGO), [$D-Pen^2-D-Pen^5$] enkephalin (DPDPE), trans-3,4-Dichloro-N-methyl-N-[2-(1-pyrrolidinyl)-cyclohexyl]-benzeneacetamide (U50,488H), and ${\beta}$-endorphin were tested as agonists for ${\mu}$, ${\delta}$, ${\kappa}$, and ${\varepsilon}$-opioid receptors, respectively. WBI significantly attenuated the antinociceptive effects of morphine and DAMGO, but increased those of ${\beta}$-endorphin. The antinociceptive effects of DPDPE and U50,488H were not affected by WBI. In addition, to more preciously understand the differential effects of WBI on ${\mu}-$ and ${\varepsilon}$-opioid receptor agonists, we assessed pretreatment effects of ${\beta}$-funaltrexamine (${\beta}$-FNA, a ${\mu}$-opioid receptor antagonist) or ${\beta}$-$endorphin_{1-27}$ (${\beta}$-$EP_{1-27}$, an ${\varepsilon}$-opioid receptor antagonist), and found that pretreatment with ${\beta}$-FNA significantly attenuated the antinociceptive effects of morphine and ${\beta}$-endorphin by WBI. ${\beta}$-$EP_{1-27}$ significantly reversed the attenuation of morphine by WBI and significantly attenuated the increased effects of ${\beta}$-endorphin by WBI. The results demonstrate differential sensitivities of opioid receptors to WBI, especially for ${\mu}-$ and ${\varepsilon}$-opioid receptors.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.3
• /
• pp.214-223
• /
• 2015

PURPOSE. To measure the surface loss of dental restorative zirconia and the short-term bond strength between an indirect composite resin (ICR) and zirconia ceramic after various sandblasting processes. MATERIALS AND METHODS. Three hundred zirconia bars were randomly divided into 25 groups according to the type of sandblasting performed with pressures of 0.1, 0.2, 0.4 and 0.6 MPa, sandblasting times of 7, 14 and 21 seconds, and alumina powder sizes of 50 and $110{\mu}m$. The control group did not receive sandblasting. The volume loss and height loss on zirconia surface after sandblasting and the shear bond strength (SBS) between the sandblasted zirconia and ICR after 24-h immersion were measured for each group using multivariate analysis of variance (ANOVA) and Least Significance Difference (LSD) test (${\alpha}$=.05). After sandblasting, the failure modes of the ICR/zirconia surfaces were observed using scanning electron microscopy. RESULTS. The volume loss and height loss were increased with higher sandblasting pressure and longer sandblasting treatment, but they decreased with larger powder size. SBS was significantly increased by increasing the sandblasting time from 7 seconds to 14 seconds and from 14 seconds to 21 seconds, as well as increasing the size of alumina powder from $50{\mu}m$ to $110{\mu}m$. SBS was significantly increased from 0.1 MPa to 0.2 MPa according to the size of alumina powder. However, the SBSs were not significantly different with the sandblasting pressure of 0.2, 0.4 and 0.6 MPa. The possibilities of the combination of both adhesive failure and cohesive failure within the ICR were higher with the increases in bonding strength. CONCLUSION. Based on the findings of this study, sandblasting with alumina particles at 0.2 MPa, 21 seconds and the powder size of $110{\mu}m$ is recommended for dental applications to improve the bonding between zirconia core and ICR.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.2
• /
• pp.114-118
• /
• 2017

Purpose: The aim of this study was to investigate the effects of a titanium component for the zirconia abutment in the internal connection implant system on screw loosening under thermocycling conditions. Materials and Methods: Internal connection titanium abutments and external connection zirconia abutments with titanium sockets were connected respectively to screw-shaped internal connection type titanium implants with 30 Ncm tightening. These implant-screw-abutment assemblies were divided into two groups of five specimens each; titanium abutments as control and zirconia abutments with titanium sockets as experimental group. The specimens were subjected to 2,000 thermocycles in water baths at $5^{\circ}C$ and $55^{\circ}C$, with 60 seconds of immersion at each temperature. The removal torque values (RTVs) of the abutment screws of the specimen were measured before and after thermocycling. RTVs pre- and post-thermocycling were investigated in statistics. Results: There was not screw loosening identified by tactile and visual inspection in any of the specimens during or after thermocycling. The mean RTV difference for the control group and the experimental group were $-1.34{\pm}2.53Ncm$ and $-1.26{\pm}2.06Ncm$, respectively. Statistical analysis using an independent t-test revealed that no significant differences were found in the mean RTV difference of the groups (P > 0.05). Conclusion: Within the limitations of this in vitro study, the titanium socket for the zirconia abutment did not show a significant effect on screw loosening under thermal stress compared to the titanium abutment in the internal connection implant.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.6
• /
• pp.1176-1183
• /
• 2017

This study was investigated the quality characteristics and antioxidant of dried Dioscorea bulbifera with various pre-soaking concentrations of oligosaccharide. Dioscorea bulbifera are prepared by additions of 0, 4, 6, 8 and 10% oligosaccharide solution, and dried at $50^{\circ}C$. The effects of pre-soaking percent of Dioscorea bulbifera slices were evaluated by the moisture, soluble solid, pH, titratable acidity, color, browning degree, texture, antioxidant activities and sensory test. According to the percent of pre-soaking oligosaccharide solution was increased, the moisture was increased but soluble solids and titratable acidity were decreased. With respect to the result of colors, Dioscorea bulbifera slices that underwent the 10% pre-soaked process (85.86%) were lighter than control (73.88%). However, the redness and yellowness scores were the lowest than control. The springiness and cohesiveness of texture showed no significant differences among all groups. Gumminess and chewiness of texture results were increased according to per-soaking concentration increase. Also the polyphenol, flavonoid and DPPH (${\alpha},{\alpha}$-diphenyl-${\beta}$-picrylhydrazyl) and ABTS [2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid)] radical scavenging activities were significantly increased with increasing immersion concentration. The Dioscorea bulbifera slices supplemented with 6% pre-soaking oligosaccharide solution treatment showed the highest total sensory score. The results of our study indicated that when pre-soaking oligosaccharide solution is used to immerse the Dioscorea bulbifera slice, it has browning inhibition and antioxidant effect.

• Fire Science and Engineering
• /
• v.19 no.2 s.58
• /
• pp.105-110
• /
• 2005

We tested the char characteristics of fire retardant treated Douglas fir at each of five constant external irradiance levels $(10,\;15,\;20,\;25\;및\;35kW/m^2)$. A Cone heater was used to expose the wood specimens to the heat flux. The size of specimens is 100- by 100- by 50-mm and the kinds of specimens are non-treated wood(N) and treated wood(F2 and f4) by water soluble fire retardants. The water-soluble fire retardants were made from mixture of aqueous solutions of monoammonium phosphate, sodium borate and zinc borate, and those are used for immersion of Douglas fir. In result of test, char fraction of fire retardant treated Douglas fir showed a considerably low char fraction than it of non-treated wood irrespective of increase of external heat flux. And char fractions has low levels with increase of fire retardant content. Burning rate of non-treated wood(N) was showed a relatively high burning rate than it of fire retardant treated wood(F2 and F4). And difference of burning rate shown more rapidly in high external irradiance than low external irradiance. When the external heat flux is $35kW/m^2$, average char rate of non-treated wood is rapidly about twice than fire retardant treated wood. Water-soluble fire retardants mixed in this study find out it has fire suppression and adiabatic effect by char layer from results of char fraction, burning rate, and char depth and rate.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.1
• /
• pp.23-28
• /
• 2003

The present study was undertaken to investigate the effects of PVP concentration and exposure temperature to vitrification solution on the post-thaw survival, in vitro maturation and development of immature bovine oocytes (germinal vesicle stage). The vitrification solution (VS) consisted of 40% ethylene glycol (EG)+0.5 M sucrose (S)+10% FBS. PVP was added to VS: 0%, 5% or 10%. The cumulus-oocyte complexes (COCs) were diluted in VS as one step, after 2 min the COCs were loaded in straw and vitrified by direct immersion into liquid nitrogen. For thawing, the straws were plunged into $30^{\circ}C$ water bath for 10s. After thawing, the oocytes were diluted in 0.5 M (in DPBS with 10% FBS) sucrose solution for 5 min. The survival rate (FDA-test and trypan blue) of immature bovine oocytes was measured. The survival rate was higher in 5% PVP (91.5%) than in 0% (64.2%) or in 10% PVP (79.7%). The proportion of metaphase II formation was 69.35% in control (no vitrified COCs), 9.3% in 40% EG+0.5 M S+0% PVP and 21.05% in 40% EG+0.5 M S+5% PVP (p<0.05). The effect of room temperature ($25^{\circ}C$ for 10 min) and cold temperature ($4^{\circ}C$ for 10 min) on COCs were determined in this study. After IVF, the cleavage and blastocysts rate of oocytes exposed to room temperature and cold temperature in VS+5% PVP was significantly different (2 cell: 63.20% vs 37.97%, blastocysts: 18.40% vs 2.53%). The cleavage rates of frozen-thawed oocytes were 20.53% with PVP and 22.13% without PVP (p>0.05). Two out of 151 oocytes (1.32%) developed to blastocyst stage after frozen-thawed with 5% PVP (p>0.05). Development of oocytes after frozen-thawing to the 2 cell were not significantly affected with or without PVP following IVF. However, the vitrification of immature bovine oocytes with PVP maintained the ability to develop to the blastocyst stage after IVM-IVF and IVC, while no blastocysts were obtained from oocytes vitrified without PVP. These results suggested that PVP has a protective role for vitrification of immature bovine oocytes as far as survival is concerned, however, the protection was not sufficient enough to support blastocyst formation.

• Cartoon and Animation Studies
• /
• s.40
• /
• pp.443-476
• /
• 2015

The university e-learning classes give a major focused on practical training in the art and design field are opened such as theory classes. The cyber universities that fully gives on-line classes even open as theory classes. They speak about difficulty and limitation of operating cyber class with practice. So, many of them organize off-line special lecture at the classroom in weekend. In the reason of studying that has the constraints of time and space, the student wastage rates in cyber universities are going higher. This research focused on giving an efficient e-learning practice environment in college e-learning courses, and operated scholastic achievement test between the augmented reality(AR) based practice education and the existing classroom based practice education. The subjects of study were totally 84 people who are the freshmen of the design department in the two-year diploma course college. They were divided 3 groups which one was treated AR based practice e-learning and two others groups were existing classroom based practice. Each of the group took the same treated lecture during 7 weeks. The first of the outcome was the AR based practice e-learning was more effective than existing classroom based practice on the side of scholastic achievement. The second, the AR based practice e-learning aroused increasing in the interest in class on the side of attribute factors. The third, the AR based practice e-learning group made higher level of studying immersion than others. In consideration of this experiment was processed in the regular college academic course, the finding by this research shows AR based major practice e-learning is an alternative lecturing strategy what can be supplemented existing classroom based academic teaching methods.

• The korean journal of orthodontics
• /
• v.25 no.2 s.49
• /
• pp.187-200
• /
• 1995

To estimate the characteristics of Korean Ni-Ti alloy orthodontic wire, this study investigated compositions, tensile properties, bending properties, heat treatment effects, and ion releasing degrees, and compared these characteristics to those of the imported Ni-Ti alloy wire. The results obtained are as follows ; 1. Ti and -Ni elements in ORTHOLLOY were in a range showing superelasticity, and there was a little difference in the Ni and Ti contents of ORTHOLLOY as compared with those of SENTALLOY. 2. The results of the tensile test concerning ORTHOLLOY exhibited a superelastic effect, indicating an area of a definite amount of stress in spite of the changes in the range from $2\%\;to\;8\%$ in the strain rate. 3. ORTHOLLOY presented higher load values than SENTALLOY in the same deflection values when the wire was tested in three-point bending. A load range displaying a superelastic effect was 80-l00g, 140-l80g, and 130-200g respectively, in wire diameters of 0.014', 0.016', and 0.018' 4. By heat treatments at $400^{\circ}C$ and at $500^{\circ}C$, a load range showing the effect of superelasticitly was lessened by the duration of the heat treatment time. The superelastic effect was destroyed as a result of the 10 minutes heat treatment at $600^{\circ}C$. 5. The quantity of the Ni ion released from ORTHOLLOY, tended to be greater than the amount of released Ni ion in SENTALLOY. The Co ion released was very little(<0.01ppm) in SENTALLOY and ORTHOLLOY irrespective of the lapse of time. Released Ni ions on the 1st day were at the maximum, and the releasing rate showed plateaus after three days. 6. The surface morphology of SENTALLOY was relatively regular irrespective of the lapse of rime, and the corrosion tendency was not observed. However, the surface morphology of ORTHOLLOY was rather irregular and shelved fitting corrosion after immersion.