• 디지털융복합연구
• /
• 제12권9호
• /
• pp.353-358
• /
• 2014

인터렉티브 아트는 관람객들과 상호 작용을 전제로 예술 작품을 구현하는 것으로 가상성, 몰입성, 상호작용성을 특징으로 한다. 그에 따라 관람객이 작품으로 몰입하게 하는 연구는 매우 중요하다. 현재까지 인터렉티브 아트분야에서, 몰입을 측정하기 위해서는 주로 설문지나 인터뷰, 정신 생리학적인 방법을 이용하였다. 그러나 이 방법들은 작품 관람 이후에 진행되어져서 정확한 몰입 측정이 어려우며 작품 관람에 방해를 줄 수 있다. 본 연구에서는 이를 개선하기 위해서 모바일 기기와 카메라를 이용하여 관람객들의 동선을 파악하고 관람시간을 중심으로 한 몰입 측정 방법을 제안한다. 본 논문은 작품의 몰입 정도를 파악하는데 도움을 제공한다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.546-549
• /
• 2004

This paper describes the electrical characteristics of the polymer lightning arresters(L.As) used to protect distribution lines and power facilities from surge. For the relative comparison, the characteristics assessment was done for 2 states of L.As before and after water immersion treatment. The L.As for the comparative test were immersed with water of $95[^{\circ}C]$ considered a severe condition. After the immersion treatment, the assessment was carried out for material analyses in chemical structure(FTIR : fourier transform infrared spectrophotometer). Electrical performance measured insulation resistance measurement, leakage current measurement, critical operation voltage measurement etc.. In addition to, the results were compared with those for the L.As deteriorated in the field. Thus, the accelerative deterioration degree of polymer materials by immersion treatment was evaluated, by which the structural defects of the polymer L.As could be inferred.

• 센서학회지
• /
• 제18권4호
• /
• pp.322-326
• /
• 2009

To estimate the measurement uncertainty for industrial platinum resistance thermometers(IPRTs) made with 3-wire connection, the immersion temperature profile was investigated using a liquid bath. Two types of IPRTs having lead wires made of silver and nickel were constructed and the immersion profiles were measured at temperatures from -50 $^{\circ}C$ to 250 $^{\circ}C$ using 3-wire and 4-wire method. As immersion depth and temperature increased, the resistances measured by 3-wire method increased linearly but not for 4-wire method. To calibrate a 3-wire IPRT, the immersion effect must be accounted for. We propose a linear equation to assess correctly the measurement uncertainty.

• 환경영향평가
• /
• 제23권6호
• /
• pp.466-476
• /
• 2014

본 연구는 식생기반형 LID 시설에 적합한 식물선정을 위해 수환경 적응도가 높은 10종의 식물을 반침수와 완전침수 조건에서 침수기간별 생육상태를 조사하여 내침수성을 비교하였다. 침수기간별 수고, 엽폭을 비교 분석한 결과, 내침수성은 원추리 > 골풀 > 노란꽃창포 > 갈대 > 부들 > 벌개미취 > 붓꽃 > 속새 > 창포 순으로 나타났다. 특히, 원추리, 골풀, 노란꽃창포는 두가지 침수조건에서 모두 양호한 생장을 보였으며, 붓꽃, 속새는 27일 전후로 고사되었으나 내침수성이 비교적 강한 것을 확인할 수 있었다. 반침 수구 조건에서 21일 기준으로 완전침수구와 달리 노란꽃창포가 내침수성이 매우 강한 식물로 나타났으며, 벌개미취 또한 양호한 생장을 하며 내침수성이 강한 것으로 나타났다. 본 실험을 통해 식생기반형 LID 시설에 적합한 식물로 원추리, 골풀, 노란꽃창포가 선정되었으며, 벌개미취, 붓꽃, 속새 또한 침수기간에 따른 이용 가능성을 확인하였다.

• Asian Journal of Business Environment
• /
• 제9권3호
• /
• pp.27-38
• /
• 2019

Purpose - The aim of this study is to explore the effectiveness in educational differences between students of the government's financial-funded groups and the non-financial-funded groups at a university in Korea. Research design, data, and methodology - The study was conducted using a survey tool of National Assessment for Student Engagement in Learning. In total, 334 participants were surveyed, of which 290 students were participants in economic support program and 44 were nonattendance program students. The general characteristics of all of the participants were investigated by frequency analysis. The analysis of participants' collective characteristics used independent t and f-test, and one-way ANOVA with IBM SPSS Statistics package program 22.0. Results - The number of participating students is higher than that of non-participating students in relation to in-activities of university immersion, but the number of participating students is lower than that of non-participating students in relation to in-quality of student support. However, there was no statistical significance. The confidence coefficient of the university-immersion and student support questionnaire is 0.860 and 0.913, respectively. Conclusions - There is no significant difference in the activities of university immersion and student support between students who participate in the economic support program and those who do not.

• 비파괴검사학회지
• /
• 제26권3호
• /
• pp.153-161
• /
• 2006

A simulation program SIMULTSONIC is under development at CNDE to help determine and/or help optimize ultrasonic probe locations for inspection of complex components. SIMULTSONIC provides a ray-trace based assessment for immersion and contact modes of inspection. The code written in Visual C++ operating in Microsoft Windows environment provides an interactive user interface. In this paper, a description of the various features of SIMULTSONIC is given followed by examples illustrating the capability of SIMULTSONIC to deal with inspection of canonical objects such as pipes. In particular, the use of SIMULTSONIC in the inspection of very thin-walled pipes (with 450 urn wall thickness) is described. Ray trace based assessment was done using SIMULTSONIC to determine the standoff distance and the angle of oblique incidence for an immersion mode focused transducer. A 3-cycle Hanning window pulse was chosen for simulations. Experiments were carried out to validate the simulations. The A-scans and the associated B-Scan images obtained through simulations show good correlation with experimental results, both with the arrival time of the signal as well as with the signal amplitudes.

• Restorative Dentistry and Endodontics
• /
• 제47권1호
• /
• pp.8.1-8.9
• /
• 2022

Objectives: The aim of this study was to compare the color change of the Giomer resin composite (Beautifil-Bulk) by using photographs obtained with a smartphone (iPhone 6S) associated with Adobe Photoshop software (digital method), with the spectrophotometric method (Vita Easyshade) after immersion in different pigment solutions. Materials and Methods: Twenty resin composite samples with a diameter of 15.0 mm and thickness of 1.0 mm were confectioned in A2 color (n = 5). Photographs and initial color readings were performed with a smartphone and spectrophotometer, respectively. Then, samples were randomly divided and subjected to cycles of immersion in distilled water (control), açai, Coke, and tomato sauce, 3 times a day, 20 minutes for 7 days. Later, new photographs and color readings were taken. Results: The analysis (2-way analysis of variance, Holm-Sidak, p < 0.05) demonstrated no statistical difference (p < 0.005) between the methods in all groups. Similar color changes were observed for all pigment solutions when using the spectrophotometric method. For the digital method, all color changes were clinically unacceptable, with distilled water and tomato sauce similar to each other and with statistical differences (p < 0.005) for Coke and açai. Conclusions: Only the tomato sauce produced a color change above the acceptability threshold using both methods of color assessment. The spectrophotometric and digital methods produce different patterns of color change. According to our results, the spectrophotometric method is more recommended in color change assessment.

• Corrosion Science and Technology
• /
• 제14권2호
• /
• pp.99-105
• /
• 2015

The structures of reinforced concrete have been extensively increased with rapid development of industrial society. Futhermore, these reinforced concretes are easy to expose to severe corrosive environments such as seawater, contaminated water, acid rain and seashore etc.. Thus, corrosion problem of steel bar embedded in concrete is very important in terms of safety and economical point of view. In this study, specimens having six different coating thickness (W/C:0.5) were prepared and immersed in flowing seawater for five years to evaluate the effect of coating thickness and immersion time on corrosion property. The polarization characteristics of these embedded steel bars were investigated using electrochemical methods such as corrosion potential, anodic polarization curve, and impedance. At the 20-day immersion, the corrosion potentials exhibited increasingly nobler values with coating thickness. However, after 5-yr. immersion their values were shifted in the negative direction, and the relationship between corrosion potential and coating thickness was not shown. Although 5-yr. immersion lowered corrosion potential, 5-yr. immersion did not increase corrosion rate. In addition, after 5-yr. immersion, the thinner cover thickness, corrosion current density was decreased with thinning coating thickness. It is due to the fact that ease incorporation of water, dissolved oxygen and chloride ion into a steel surface caused corrosion and hence, leaded to the formation of corrosion product. The corrosion product plays the role as a corrosion barrier and increases polarization resistance. The corrosion probability evaluated depending on corrosion potential may not be a good method for predicting corrosion probability. Hence, the parameters including cover thickness and passed aged years as well as corrosion potential is suggested to be considered for better assessment of corrosion probability of reinforced steel exposed to partially or fully in marine environment for long years.

• 해양환경안전학회지
• /
• 제6권1호
• /
• pp.11-22
• /
• 2000

The paper describes creation methods of background scenes to implement realistic virtual environments in the VRSS (Virtual Reality Ship Simulator). VRSS is next-generation system constructed with virtual tools in a virtual space. Thus, it could have many benefits compared to conventional ship simulators composed with heavy bridge mock-up system and wide visual presentations. In this work, we developed effective 3D object modeling techniques, and constructed virtual harbor scene by using 3D-Webmaster authoring tool. The virtual harbor was built with object-oriented 3D objects modeled to interact with user's action. With the immersion-type VR system, we created virtual harbor environments in a virtual space, and discussed on the naturalness of the scene with test results of SDMPA (Semantic Differential Method for Psychophysical Assessment) by 10 subjects. As the results of subject assessment, all of the participants could felt natural-like harbor. Therefore, we found that the proposed creation methods and procedures of background scene are enabling to fit to the full mission VRSS construction.

• 한국건축시공학회지
• /
• 제24권3호
• /
• pp.297-308
• /
• 2024

본 연구에서는 화재로 손상된 콘크리트의 손상 깊이 판정방법을 제안하고자 하였다. 고온에 노출된 콘크리트의 경우 내부 조직이 팽창하여 건전한 부위보다 손상부위의 공극이 다량 발생하고 미세균열이 발생됨에 따라 흡수율이 더 높아져 수중 침치후 건조를 하는과정에서 건전부위보다 손상부위의 늦은 건조속도와 이에 따른 명도차이에 의한 색상차이를 이용하여 손상 깊이를 측정하는 것이다. 수중 침지방법의 경우 배합별로 각각 38.7 및 37.5mm로 나타났는데, 기존 페놀프탈레인에 의한 중성화 측정 방법보다 손상깊이를 깊게 추정하는 것을 알 수 있었다. 이는 Portlandite(Ca(OH)₂)의 존재여부에 따라 발색이 되는 페놀프탈레인법에 비해 조직이완에 따른 흡수율 원리를 이용한 손상 깊이를 측정하는 방법이 더 민감도가 높아 얻어진 결과로 사료된다.