• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2001년도 춘계 학술대회논문집
• /
• pp.105-110
• /
• 2001

An Eulerian-Lagrangian method, so called immersed boundary method, is used for analysing viscous flow around arbitrary bodies, where governing equations are discretized on a regular grid by using a finite volume method. To improve the accuracy of flow near body boundaries, a second-order accurate interpolation scheme is used and a level-set based grid deformation method is presented to construct the adaptive grids around body boundaries. The present scheme is used to simulate steady flow around a semicircular cylinder mounted on the bottom of flow domain and calculated results are validated by results of a body fitted grid method. Finally, present method is applied to a complex flow around multi body and the usefulness is checked by investigating calculated results.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권6호
• /
• pp.598-612
• /
• 2017

The recently developed Harmonic Polynomial Cell (HPC) method has been proved to be a promising choice for solving potential-flow Boundary Value Problem (BVP). In this paper, a flux method is proposed to consistently deal with the Neumann boundary condition of the original HPC method and enhance the accuracy. Moreover, fixed mesh algorithm with free surface immersed is developed to improve the computational efficiency. Finally, a two dimensional (2D) multi-block strategy coupling boundary-fitted mesh and fixed mesh is proposed. It limits the computational costs and preserves the accuracy. A fully nonlinear 2D numerical wave tank is developed using the improved HPC method as a verification.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.760-763
• /
• 2010

강내탄도 성능 해석의 정확도를 높이기 위해서 1차원 해석 코드를 2차원 및 3차원으로 확장시키는 작업이 필요하다. 다차원 확장 시 이동경계면 해석에 Cut Cell Method를 적용하였다. 이에 high resolution 기법인 MUSCL-Hancock을 선택하였고 free piston problem에 적용하여 그 타당성을 검증하였다.

• 대한기계학회논문집B
• /
• 제40권11호
• /
• pp.717-726
• /
• 2016

본 연구는 밀폐계 내부에 고온의 원형 실린더가 존재할 때, 밀폐계의 종횡비 변화에 따른 밀폐계 내부의 3차원 자연대류 현상에 대해 수치해석을 수행하였다. 밀폐계 내부의 원형 실린더는 유한체적법(FVM)에 기초한 가상 경계법(IBM)을 사용하여 구현하였다. 본 연구에서 고려한 Rayleigh 수의 범위는 $10^5{\leq}Ra{\leq}10^6$이며, Prandtl 수는 0.7이다. 밀폐계의 폭을 변화하여 밀폐계의 종횡비를 증가시켰으며, 밀폐계의 종횡비는 $1{\leq}W/L{\leq}4$ 범위에서 1 간격으로 고려하였다. 본 연구에서 고려한 모든 Rayleigh 수와 밀폐계의 종횡비 범위에서 열유동장은 x=0 단면을 기준으로 좌우 대칭을 이루며 정상상태에 도달하였다. 또한 밀폐계의 종횡비가 증가할수록 원형 실린더의 표면 평균 Nusselt수는 증가하는 반면, 밀폐계 벽면의 표면 평균 Nusselt수는 감소하였다.

• 대한치과교정학회지
• /
• 제23권3호
• /
• pp.327-340
• /
• 1993

The purpose of this study was to estimate the possibility of practical application of TiN ion-plating method on orthodontic appliances. TiN was coated on the surface of orthodontic stainless steel roll band by means of ion-plating method, and colorimetric properties of its obtained TiN film were investigated by using color analyzer. Also its corrosion and discoloration properties were compared with those of non ion-plated stainless steel roll band by using immersion test, which was done in 1N HCl solution for 10 days. Both weight changes and surface corrosion appearances of specimens for each day were respectively investigated by using electronic weighing machine and SEM(Scanning Electron Microscope). The discoloration degress of TiN-coated specimens immersed in 1N HCl solution were investigated by using color analyzer and then judged by N.B.S.(National Bureau of Standard) Unit. The results of this study were summarized as follows. o TiN ion-plated films showed the hue of 5Y, the value of 7, and the chroma of 3 by Munsell notations. o The weight losses and surface changes of TiN ion-plated specimens immersed in 1N HCl solution were less than those of non ion-plated specimens. It was shown, therefore, that the corrosion resistance was significantly improved by TiN ion-plating. o The discoloration degrees of non ion-plated specimens were too significant to be examined by color analyzer, while those of TiN ion-plated specimens were slight when judged by N.B.S. Unit. It was also apparent, therefore, that the anti-discoloration property was significantly improved by TiN ion-plating.

• 한국화재소방학회논문지
• /
• 제25권3호
• /
• pp.57-62
• /
• 2011

본 논문에서는 한옥 부재로 사용되는 육송을 대상으로 도포법과 상압함침법의 방염처리 방법을 적용하여 각 연소특성을 평가하였다. 도포 처리는 시험체 표변에 2-3회 붓칠한 후 24h 건조하는 것을 3회 반복하였고, 상압함침 처리는 시험체를 약제 속에 72h 동안 함침시켜 처리하였다. 연소특성 평가방법으로는 멕켈버어너를 사용한 방염성능 시험, 콘칼로리미터를 사용한 열방출률 시험방법을 적용하였다. 시험 결과 방염성능에 있어서 두 가지 방법으로 처리한 시험체는 모두 현재 합판에 대한 성능기준을 만족하였으며, 상압함침 처리보다는 도포 처리한 시험체의 방염성능이 더 우수하게 나타났다. 열방출률 시험 결과로는 착화까지의 시간, 최대열방출률, 질량감소율 총방출열량 등의 지수에서 상압함침 처리보다는 도포 처리한 시험체가 더 높은 성능을 보였다.

• Restorative Dentistry and Endodontics
• /
• 제15권2호
• /
• pp.104-114
• /
• 1990

The purpose of this study was to evaluate the adaptation of root canal filling material to the dentinal wall of root canal and to compare the sealing ability of the root canal filling materials using ultrasonic endodontic instrument with injection-molded thermoplasticized gutta-percha filling method and lateral condensation method. Fifty fresh human single root exlracted for orthodontic treatment, were randomly selected, and instrumented by step-back technique. And then, the teeth were divided into 5 groups according to each root canal filling methods. In the experimental group 1 and group 2, the root canals were filled with gutta perdia cases using ultrasonic instrument with and without sealer. In the experimental group 3 and 4, using jection-moldeed thermoplasticized gutta-percha method by obtul$^{(R)}$ canals were filled with and without sealer. In the control group, the canals were filled with sealer by lateral candensation. And then, 5 teeth of each group were immersed in black Indian ink, decalcified and cleared. The depth of dye penetration into the root canal were evaluated with stereoscope (Reichert Ltd., USA). Among the 5 teeth remaining in each group, the single longituding grooves were made on the labial and lingual root surfaces and then immersed in the liquid nitrogen to fracture the teeth spontaneously without any distortions of gutta-percha. Each specimens were examined with X-650 Scanning Electron Microscope(Hitachi ltd, Japan) to show the adaptation to the canal wall, void, homogenicity of filling material and location of gutta-percha or sealer in the dentinal tubules of the root canal. The observations were as follows : 1. The experimental group 1 showed smaller mean dye penetration than control group, and showed the penetraton of sealer in the dentinal tubules of apical third of the root canal. 2. The experimental group 2 and group 4 showed the penetration of gutta-percha in the dentinal tubules of root canals. 3. The experimental group 1 and group 3 showed less mean dye penetration than the experimental group 2 and group 4. 4. The experimental group 1 and group 2 showed better adaptation of filling materials than control group.

• 대한조선학회논문집
• /
• 제51권5호
• /
• pp.409-418
• /
• 2014

Simulation of flow past a complex marine structure requires a fine resolution in the vicinity of the structure, whereas a coarse resolution is enough far away from it. Therefore, a lot of grid cells may be wasted, when a simple Cartesian grid system is used for an Immersed Boundary Method (IBM). To alleviate this problems while maintaining the Cartesian frame work, we adopted an Adaptive Mesh Refinement (AMR) scheme where the grid system dynamically and locally refines as needed. In this study, We implemented a moving IBM and an AMR technique in our basic 3D incompressible Navier-Stokes solver. A Volume Of Fluid (VOF) method was used to effectively treat the free surface, and a recently developed Lagrangian Dynamic Subgrid-scale Model (LDSM) was incorporated in the code for accurate turbulence modeling. To capture vortex induced vibration accurately, the equation for the structure movement and the governing equations for fluid flow were solved at the same time implicitly. Also, We have developed an interface by using AutoLISP, which can properly distribute marker particles for IBM, compute the geometrical information of the object, and transfer it to the solver for the main simulation. To verify our numerical methodology, our results were compared with other authors' numerical and experimental results for the benchmark problems, revealing excellent agreement. Using the verified code, we investigated the following cases. (1) simulating flow around a floating sphere. (2) simulating flow past a marine structure.

• 대한치과기공학회지
• /
• 제33권1호
• /
• pp.25-35
• /
• 2011

Purpose: There are some advantages of the acrylic resin denture base ; appropriate strength, volume safety, simple processing apparatus, and low cost. But, it have a weakness for fracture by intense pressure or shock. However, the repairs for resin denture base are possible using various materials and techniques. There is a few studies in repairs for resin denture base, but not clinical researches. And there is no studies in absorbed saliva into the region of fracture and bond strength. This study is to observe re-bond strength of resin denture base after repairing under saliva absorption. Methods: The samples were made of heat curing resin and the rectangular parallelepiped specimens which were 50mm long, 10mm wide and 3mm high. The four different groups immersed in the artificial saliva for 2 weeks were prepared, 1) no repaired control samples, 2) immediately repaired samples, 3) repaired samples after 1 day dry, and 4) repaired samples after 3 days dry. The prepared samples were repaired by two different curing materials, self curing resin and heat curing resin method. Each groups composed of 10 specimens were experimented with the three point bending tests for bonding strength measuring Results: There were under condition absorbed in the artificial saliva and repaired by self curing resin method, repaired specimens after 1 day and 3 days dry groups had higher values of bonding strengths than control group, and bonding strengths of immediately repaired samples were similar to those of control samples (p<0.05). There were under condition immersed in the artificial saliva and repaired by heat curing resin method, immediately repaired samples showed similar values to bonding strengths of control groups, and repaired samples after 1 day and 3 days dry groups were lower than those of control group (p>0.05). Conclusion: In this study, the repairs for resin denture base were remarkably high values of bonding strengths than those of the past, and showed that have stable bonding strengths independent of saliva absorption of denture base, so present repairs for resin denture base can be performed, regardless of saliva conditions.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1996년도 학술발표회
• /
• pp.68-71
• /
• 1996

The thermal response of sprinkler is characterized by the response time index(RTI). The RTI represents the product of the thermal time constant for the heat responsive element of a sprinkler and the square root of the hot air velocity at plunge test. A plunge test is adapted for measuring RTI, wherein a sprinkler is suddenly immersed in the steady flow in the test section of a hot air tunnel. The method of measurements of the response parameters is presented.