• Bulletin of the Korean Chemical Society
• /
• v.30 no.12
• /
• pp.2887-2889
• /
• 2009

An efficient and easy method for one-pot three-component synthesis of amidoalkyl naphthols by the condensation of aromatic/heteroaromatic/aliphatic aldehydes, 2-naphthol and amides or urea under thermal condition at $60^{\circ}C$ in the presence of acidic ionic liquid 1-butyl-3-methylimidazolium hydrogen sulphate ([bmim]$HSO_4$) has been described.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.10
• /
• pp.3373-3377
• /
• 2012

A series of polystyrene-supported 1-(propyl-3-sulfonate)-3-methyl-imidazolium hydrosulfate acidic ionic liquid (PS-$[SO_3H-PMIM][HSO_4]$) catalysts were prepared and tested for mononitration of simple aromatics compounds with nitric acid. It was found that the reactivity of the catalysts increased with increasing $[SO_3H-PMIM][HSO_4]$ content. The para-selectivity was not only related to the $[SO_3H-PMIM][HSO_4]$ content but also the substituent groups in aromatics. A reaction mechanism of nitration over this new catalyst was proposed. The catalytic activity of this catalyst decreased slightly after fifth runs in the synthesis of nitrotoluene.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.829-833
• /
• 2007

IPMC-EMIM (Ionic Polyer Metal Composites + 1-ethyl-3- methyl imidazolium trifluromethane sulfonate, EMIM-Tfo) is fabricated by substituting ionic liquid for water in Nafion film, which improves water sensitiveness of IPMC and guarantees uniform performance regardless of the surrounding environment. In this paper, we will introduce the design and analysis of AF Lens Actuator using IPMC-EMIM. We will briefly introduce the procedure of fabrication of IPMC-EMIM first, and proceed on to define the necessary variables, analyze performance by changing the value of the variables, make a designed AF Lens Actuator, and measure the performance of one of them.

• Polymer(Korea)
• /
• v.29 no.2
• /
• pp.216-220
• /
• 2005

A new type of polymer gel electrolyte was prepared from poly(ethylene glycol) diacrylate(PEGDA) and 1-butyl-3-methylimidazolium bis((trifluorornethyl) sulfonyl) amide$(BuMeIm^+Tf_2N^-)$ ionic liquid. The effect of the ionic liquid on ionic conductivity of the gel polymer electrolyte was investigated. It was observed that the gel polymer electrolyte having the ionic liquid exhibited higher ionic conductivity $(ca.\;10^{-3}S/cm)$ as well as electrochemical stability than that using organic solvent.

• Korean Chemical Engineering Research
• /
• v.51 no.3
• /
• pp.347-351
• /
• 2013

The preparation of glycerol carbonate (GC) from urea through carbonylation with renewable glycerol was investigated by using ionic liquid catalysts. It was found that quaternary ammonium salt and imidazolium salt ionic liquids with a shorter alkyl chain length and higher nucleophilic anion showed better catalytic performance. The effects of reaction temperature, reaction time and degree of vacuum on the reactivity of TBAC catalyst ware discussed. Zinc chloride ($ZnCl_2$) was used as co-catalyst with the ionic liquid catalyst. The mixed catalyst showed a synergy effect on the glycerol conversion and GC yield probably due to the acid-base properties of the catalysts.

• Korean Chemical Engineering Research
• /
• v.48 no.3
• /
• pp.332-336
• /
• 2010

Ionic liquid immobilized on mesoporous amorphous silica was prepared from the coupling of 1-(triethoxysilylpropyl)-3-n-alkyl-imidzolium halides with tetraethyl orthosilicate(TEOS) through template-free condensation under strong acidic conditions. The immobilized 1-n-butyl-3-methyl imidazolium bromide ionic liquid on amorphous silica(BMImBr-AS) was proved to be an effective heterogeneous catalyst for the synthesis of dimethyl carbonate(DMC) from transesterification of ethylene carbonate(EC) with methanol. High temperature, high carbon dioxide pressure and long reaction time were favorable for the reactivity of BMImBr-AS. Kinetic studies based on two step reactions revealed that the proposed reaction model fitted well the experimental data. The apparent activation energy was estimated to be 67.4 kJ/mol.

• Analytical Science and Technology
• /
• v.24 no.6
• /
• pp.477-483
• /
• 2011

This work is on the synthesis of EMI-$BF_4$ (1-ethyl-3-methylimidazolium tetrafluoroborate) and purification of spectroscopic grade using aluminium oxide method, activated charcoal method, and liquid/liquid fractional extraction method in order to make supercapacitor finally. But the aluminum oxide method and the activated charcoal method were not suitable for obtaining high-purity ionic liquids. The liquid/liquid fractional distillation method turned out that as the concentration of solvent ($H_2O$) was increased, the higher purity of EMI-$BF_4$ was obtained and the electrical capacity of this compound was increased to higher value. When the solvent was changed to from methylene chloride to 1,2-dichloroethane, the higher purity of EMI-$BF_4$ was obtained.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.6
• /
• pp.2058-2062
• /
• 2011

The effect of the addition of ionic liquids with four different cations (imidazolium, pyrrolidinium, piperidinium and pyridinium) on the performance of dye-sensitized $TiO_2$ solar cells based on electrolytes containing a t-butylpyridine (TBP) in 3-methoxypropionitrile (MPN) was studied. A total of 18 ionic liquids with mono-, di- and tri-alkyl derivatives were used in the present study, and among them a pyridinium cation with a mono-alkyl group showed better cell efficiency than the others. The best photoelectric conversion efficiency, 7.213%, was obtained using 1-hexylpyridinium iodide with an open-circuit photovoltage ($V_{oc}$) = 0.731 V, a short-circuit photocurrent density ($J_{sc}$) = 16.175 $mA/cm^2$, and a fill factor (ff) = 0.610 under AM1.5 and 100 $mW/cm^2$ illumination.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.11
• /
• pp.3259-3264
• /
• 2010

A label-free amperometric immunosensor has been proposed for the detection of myeloperoxidase (MPO) in human serum. To fabricate such an immunosensor, a composite film consisting of N,N-dimethylformamide (DMF), multiwall carbon nanotubes (MWCNTs) and 1-ethyl-3-methyl imidazolium tetrafluoroborate ($EMIMBF_4$) suspension was initially formed on a glassy carbon electrode (GCE). Then cerium dioxide ($CeO_2$) dispersed by chitosan was coated on the GCE. After that, MPO antibodies (anti-MPO) were attached onto the nano$CeO_2$ surface. With a noncompetitive immunoassay format, the antibody-antigen complex formed between the immobilized anti-MPO and MPO in sample solution. The immunosensor was characterized by cyclic voltammetry, transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The factors influencing the performance of the immunosensor were studied in detail. Under optimal conditions, the current change before and after the immunoreaction was proportional to MPO concentration in the range of 5 to $300\;ng\;mL^{-1}$ with a detection limit of $0.2\;ng\;mL^{-1}$.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.12
• /
• pp.3771-3776
• /
• 2013

1-Alkyl-3-methylimidazolium chloride-LiCl melts were prepared from the reaction of 1-alkyl-3-methylimidazolium chloride ([RMIm]Cl; R=allyl or n-butyl) and lithium chloride, and their ability to dissolve cellulose was evaluated. The solubility of cellulose was greatly increased to 320% when [RMIm]Cl was replaced by [RMIm][$LiCl_2$]. Dissolved cellulose in LiCl/[RMIm]Cl melts was successfully regenerated by adding water and LiCl/[RMIm]Cl melts were easily recovered by removing water. As supported by the computational results, the higher solubility of cellulose in [RMIm][$LiCl_2$] can be ascribed to the increased bond distance between anion and C(2)-H of the imidazolium ring compared with that in [RMIm]Cl, thereby resulting in the increased interaction between $[LiCl_2]^-$ and the hydroxyl groups of cellulose.