• 한국방사선학회논문지
• /
• 제8권7호
• /
• pp.371-376
• /
• 2014

CdTe 멀티에너지 X선 영상센서와 ROIC를 패키징 하기 위한 flip chip bump bonding, Au wire bonding 및 encapsulation 공정조건을 개발하였으며 성공적으로 모듈화 하였다. 최적 flip chip bonding 공정 조건은 접합온도 CdTe 센서 $150^{\circ}C$, ROIC $270^{\circ}C$, 접합압력 24.5N, 접합시간 30s일 때이다. ROIC에 형성된 SnAg bump의 bonding이 용이하도록 CdTe 센서에 비하여 상대적으로 높은 접합온도를 설정하였으며, CdTe센서가 실리콘 센서에 비하여 쉽게 파손되는 것을 고려하여 접합압력을 최소화하였다. 패키징 완료된 CdTe 멀티에너지 X선 모듈의 각각 픽셀들은 단락이나 합선 등의 전기적인 문제점이 없는 것을 X선 3D computed tomography를 통해 확인할 수 있었다. 또한 Flip chip bump bonding후 전단력은 $2.45kgf/mm^2$ 로 측정되었으며, 이는 기준치인 $2kgf/mm^2$ 이상으로 충분한 접합강도를 가짐을 확인하였다.

• IEIE Transactions on Smart Processing and Computing
• /
• 제6권1호
• /
• pp.66-70
• /
• 2017

Radioactive materials are used in medicine, non-destructive testing, and nuclear plants. Source localization is especially important during nuclear decommissioning and decontamination because the actual location of the radioactive source within nuclear waste is often unknown. The coded-aperture imaging technique started with space exploration and moved into X-ray and gamma ray imaging, which have imaging process characteristics similar to each other. In this study, we simulated $21{\times}21$ and $37{\times}37$ coded aperture collimators based on a modified uniformly redundant array (MURA) pattern to make a gamma imaging system that can localize a gamma-ray source. We designed a $21{\times}21$ coded aperture collimator that matches our gamma imaging detector and did feasibility experiments with the coded aperture imaging system. We evaluated the performance of each collimator, from 2 mm to 10 mm thicknesses (at 2 mm intervals) using root mean square error (RMSE) and sensitivity in a simulation. In experimental results, the full width half maximum (FWHM) of the point source was $5.09^{\circ}$ at the center and $4.82^{\circ}$ at the location of the source was $9^{\circ}$. We will continue to improve the decoding algorithm and optimize the collimator for high-energy gamma rays emitted from a nuclear power plant.

• International Journal of Aeronautical and Space Sciences
• /
• 제14권3호
• /
• pp.282-295
• /
• 2013

In order to communicate with a ground station, the tracking profile design problem for a directional antenna system is considered. Because the motions of the gimbal angles in the antenna system affect the image quality, the main object is to minimize the motion of the gimbal angles during the satellite's imaging phase. For this goal, parameter optimization problems in the imaging and maneuver phases are formulated separately in the body-frame, and solved sequentially. Also, several mechanical constraints, such as the limitation of the gimbal angle and rate, are considered in the problems. The tracking profiles of the gimbal angles in the maneuver phases are designed with N-th order polynomials, to continuously connect the tracking profiles between two imaging phases. The results confirm that if the vector trace of the desired antenna-pointing vector is within the antenna's beam-width angle, motions of the gimbal angles are not required in the corresponding imaging phase. Also, through numerical examples, it is shown that motion of the gimbal angles in the imaging phase can be minimized by the proposed design process.

• Nuclear Engineering and Technology
• /
• 제53권5호
• /
• pp.1619-1625
• /
• 2021

This paper demonstrates the possible nondestructive analysis of iron artifacts' metallurgical characteristics using neutron imaging. Ancient kingdoms of the Korean Peninsula used a direct smelting process for ore smelting and iron bloom production; however, the use of iron blooms was difficult because of their low strength and purity. For reinforcement, iron ingots were produced through refining and forge welding, which then underwent various processes to create different iron goods. To demonstrate the potential analysis using neutron imaging, while ensuring artifacts' safety, a sand iron ingot (SI-I) produced using ancient traditional iron making techniques and a sand iron knife (SI-K) made of SI-I were selected. SI-I was cut into 9 cm², whereas the entirety of SI-K was preserved for analysis. SI-I was found to have an average grain size of 3 ㎛, with observed α-Fe (ferrite) and pearlite with a body-centered cubic (BCC) lattice structure. SI-K had a grain size of 1-3 ㎛, α-Ferrite on its backside, and martensite with a body-centered tetragonal (BCT) structure on its blade. Results show that the sample's metallurgical characteristics can be identified through neutron imaging only, without losing any part of the valuable artifacts, indicating applicability to cultural artifacts requiring complete preservation.

• 한국의학물리학회지:의학물리
• /
• 제33권4호
• /
• pp.37-52
• /
• 2022

Over the past decades, radiation therapy combined with imaging modalities that ensure optimal image guidance has revolutionized cancer treatment. The two major purposes of using imaging modalities in radiotherapy are to clearly delineate the target prior to treatment and set up the patient during radiation delivery. Image guidance secures target position prior to and during the treatment. High quality images provide an accurate definition of the treatment target and the possibility to reduce the treatment margin of the target volume, further lowering radiation toxicity and improving the quality of life of cancer patients. In this review, the various types of image guidance modalities used in radiation therapy are distinguished into ionized (kilovoltage and megavoltage image) and nonionized imaging (magnetic resonance image, ultrasound, surface imaging, and radiofrequency). The functional aspects, advantages, and limitation of imaging using these modalities are described as a subsection of each category. This review only focuses on the technological viewpoint of these modalities and any clinical aspects are omitted. Image guidance is essential, and its importance is rapidly increasing in modern radiotherapy. The most important aspect of using image guidance in clinical settings is to monitor the performance of image quality, which must be checked during the periodic quality assurance process.

• 한국정보통신학회논문지
• /
• 제13권1호
• /
• pp.121-126
• /
• 2009

평면기반 컴퓨터 집적 영상 복원 (CIIR)기술은 3D 물체에 대한 깊이 영상복원이 가능한 기술이다. 그러나 복원되는 깊이에 따라 영상에 잡음이 발생하게 되어 해상도를 저하시키는 문제점이 있다. 본 논문에서는 이 문제점을 극복하기 위해서 CIIR 기술에 대한 신호 모델을 설명하고, 이를 통하여 CIIR 기술에 발생하는 잡음과 이를 보정하는 방법을 소개한다. 컴퓨터적 실험을 통하여 2D Gaussian 영상의 복원 영상에 대한 잡음 특성을 조사하고, 보정 과정을 통하여 고해상도의 영상을 얻을 수 있음을 보였다.

• 한국정보통신학회논문지
• /
• 제14권11호
• /
• pp.2563-2568
• /
• 2010

합성 촬영 집적 영상 (synthetic aperture integral imaging; SAII) 기술은 하나의 카메라를 이동하여 3D 물체에 대한 다시점 영상을 획득하여 깊이 정보의 3D 영상을 복원이 가능한 기술이다. 이 방법은 크게 3D 물체의 요소 영상을 픽업하는 과정과 픽업된 요소 영상을 이용하여 컴퓨터 기반으로 3D 깊이 영상들을 복원하는 두 과정으로 나눈다. 본 논문에서는 이 SAII에 대한 신호 모델을 설명하고, 이를 통하여 발생하는 잡음을 정의하고 해석하였다. SAII에 대한 신호해석을 통하여 다시점 영상을 얻기 위한 카메라 이동 거리를 줄임으로써 영상 잡음감소와 계산 속도 개선을 동시에 얻을 수 있음을 보고한다.

• 한국기계가공학회지
• /
• 제19권5호
• /
• pp.105-110
• /
• 2020

The global battery market is rapidly growing due to the development of vehicles(EV) and wireless electronic products. In particular logistics robots, which hielp to produce EVs, have attracted much interest in research in Korea Because logistics sites and factories operate continuously for 24 hours, the technology that can dramatically increase the operation time of the logistics equipment is rapidly developing, and various high-level technologies are required for the batteries used in. for example, logistics robots. These required technologies include those that enable rapid battery charging as well wireless charging to charge batteries while moving. The development of these technologies, however, result in increasing explosions and topical accidents involving rapid charging batteries These accidents due to the thermal shock caused by the heat generated during the charging of the battery cell. In this study, a performance evaluation of a heat dissipation design using infrared thermal imaging was performed on an energy storage systrm(Ess) applied with an internal heat conduction cooling method using a heating plate.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.368-372
• /
• 2009

Pin-hole model has been widely used as a robust tool for easily understanding how to obtain a stereo image and how to present the depth-cue to an observer in stereoscopy. However, most of the processes to analyze depth cue in stereoscopy are performed that a stereo image is taken by camera model practically but depth cue of the image is analyzed by pin-hole model. Therefore, the result of depth cues by the process to be uncorrected. The reason of the uncorrected depth cue is led to the image distances of camera model due to variable focused object distances, and it makes a depth distortion. In this paper, we tried to show the contradiction such as occurring depth distortion in the process which the pin-hole model is used to analyze depth cue despite practical camera model is used in stereoscopy, and we presents the method to overcome the contradiction.

• 한국전기전자재료학회논문지
• /
• 제27권2호
• /
• pp.91-96
• /
• 2014

Aspheric lenses used in the thermal imaging are typically fabricated using expensive single-crystal materials (Ge and ZnS, etc.) by the costly single point diamond turning (SPDT) process. As a potential solution to reduce cost, compression molding method using chalcogenide glass has been attracted to fabricate IR optic. Thermal deformation of a molded lens should be compensated to fabricate chalcogenide aspheric lens with form accuracy of the submicron-order. The thermal deformation phenomenon of molded lens was analyzed ant then compensation using mold iteration process is followed to fabricate the high accuracy optic. Consequently, it is obvious that compensation of thermal deformation is critical and useful enough to be adopted to fabricate the lens by molding method.