• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.138-141
• /
• 1995

This paper describes a 3-dimensional measuring method for cylindrical huge ingot pressed with forging machine. Target ingot we consider here is rotated around a fixed axis during measurement. Using an image processing technique every profile of cross-section is obtained, and 3D image is reconstructed. One method to calibrate the system setting is also presented. Experimental results reveal that the method are applicable and the algorithm is feasible.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.684-689
• /
• 1987

Digital Subtraction Angiography(DSA) technique has been widely used to detect vascular diseases and hemodynamic parameters noninvasively. However, there are few quantitative studies on the factors in fluencing the resultant DSA image quality. In this paper, several important factors are suggested to improved the DSA image quality based on mathematical analysis. Experimental DSA images for different filters are shown and also discussed the difference between original and processed image quality.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.849-851
• /
• 2002

This research describes a image-processing technique for the scratch detecting algorithm for ITO coated glass. We use the modified logical thresholding method for binarization of gray-scale glass image. This method is useful to the algorithm for detecting the scratch of ITO coated glass automatically without need of any prior information of manual fine-tuning of parameters.

• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.6
• /
• pp.379-383
• /
• 2015

This paper presents an approach to detect object distance with the use of the recently developed low-cost Kinect sensor. The technique is based on Kinect color depth-image processing and can be used to design various computer-vision applications, such as object recognition, video surveillance, and autonomous path finding. The proposed technique uses keypoint feature detection in the Kinect depth image and advantages of depth pixels to directly obtain the feature distance in the depth images. This highly reduces the computational overhead and obtains the pixel distance in the Kinect captured images.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.10 no.2
• /
• pp.53-66
• /
• 2006

Recent technique has shown high interest in 3D stereoscopic image, one out of high immersion appearance techniques. Unlike general 2D image, 3D stereoscopic image is generated by 3D geometric information. Therefore, the lack of 3D geometric information sometimes imposes restrictions or makes editing more tedious. We propose a new unsupervised technique aimed to generate stereoscopic image which is estimated by depth-map information using image-based modeling from a single input image. The proposed system is implemented as the Adobe Photoshop(R) plug-in for considering generality and expandability, and also supports a preview function of interactive 3D stereoscopic image to determine stereoscopic view of high quality.

• Journal of Mechanical Science and Technology
• /
• v.17 no.11
• /
• pp.1704-1713
• /
• 2003

Point contact film thickness in elastohydrodynamic lubrication (EHL) is analyzed by image processing method for the images from an optical interferometer with monochromatic incident light. Interference between the reflected lights both on half mirror Cr coating of glass disk and on super finished ball makes circular fringes depending on the contact conditions such as sliding velocity, applied load, viscosity-pressure characteristics and viscosity of lubricant under ambient pressure. In this situation the film thickness is regarded as the difference of optical paths between those reflected lights, which make dark and bright fringes with monochromatic incident light. The film thickness is computed by numbering the dark and bright fringe orders and the intensity (gray scale image) in each fringe regime is mapped to the corresponding film thickness. In this work, we developed a measuring technique for EHL film thickness by dividing the image patterns into two typical types under the condition of monochromatic incident light. During the image processing, the captured image is converted into digitally formatted data over the contact area without any loss of the image information of interferogram and it is also interpreted with consistency regardless of the observer's experimental experience. It is expected that the developed image processing method will provide a valuable basis to develop the image processing technique for color fringes, which is generally used for the measurement of relatively thin films in higher resolution.

• Journal of Advanced Navigation Technology
• /
• v.20 no.6
• /
• pp.625-630
• /
• 2016

Recently, various types of image contents are being produced, and interest in copyright protection technology is increasing. In this paper, we propose an image encryption technology for color images. This technique divides the image into RGB color components and then performs quad-tree decomposition based on the edge of image. After the quad-tree partitioning, encryption is performed on the selected blocks. Encryption is performed on color components to measure encryption efficiency, and encryption efficiency is measured even after reconstitution into a color image. The encryption efficiency uses a visual measurement method and an objective image quality evaluation method. The PSNR values were measured as 7~10 dB for color difference components and 16~19 dB for color images. The proposed image encryption technology will be used to protect copyright of various digital image contents in the future.

• Journal of IKEEE
• /
• v.27 no.3
• /
• pp.280-287
• /
• 2023

Deep learning advancements can solve computer vision problems, but large-scale datasets are necessary for high accuracy. In this paper, we propose an image generation technique using object bounding boxes and image edge components. The object bounding boxes are extracted from the images through object detection, and image edge components are used as input values for the image generation model to create new image data. As results of experiments, the images generated by the proposed method demonstrated similar image quality to the source images in the image quality assessment, and also exhibited good performance during the deep learning training process.

• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.5
• /
• pp.17-25
• /
• 2019

In this paper, we introduce the technology to convert a single human image into a fashion show animation video clip. The technology can help the customers confirm the dynamic fitting result when combined with the virtual try on technique as well as the interesting experience to a normal person of being a fashion model. We developed an extended technique of full human 2D to 3D inverse modeling based on SMPLify human body inverse modeling technique, and a rigged model animation method. The 3D shape deformation of the full human from the body model was performed by 2 part deformation in the image domain and reconstruction using the estimated depth information. The quality of resultant animation videos are made to be publically available for evaluation. We consider it is a promising approach for commercial application when supplemented with the post - processing technology such as image segmentation technique, mapping technique and restoration technique of obscured area.

• Journal of Biomedical Engineering Research
• /
• v.15 no.1
• /
• pp.63-70
• /
• 1994

A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors'reporting results. Input int'ormation was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and Analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed id'ormation can be transferred for patient diagnosis through LAN (local area network).