• 한국방사선학회논문지
• /
• 제15권5호
• /
• pp.705-713
• /
• 2021

엑스선 영상 시스템으로부터 획득한 영상의 공간주파수에 대한 해상도를 분석하기 위해 변조전달함수(modulation-transfer function, MTF)를 계산한다. 일반적으로 검출기의 응답함수는 슬릿-카메라를 사용하여 선분포함수(line-spread function, LSF)를 획득하고, 푸리에 변환을 거쳐 변조전달함수를 도출한다. 엑스선이 항상 슬릿-카메라 중심에 입사해야 된다는 조건 때문에 실험자에 의해 발생하는 검출기와 슬릿-카메라의 기울임은 검출기 성능에 영향을 미치게 된다. 이와 더불어 기울임에 확대율이 더해진다면 엑스선 영상 시스템의 성능평가에 문제가 발생할 것이다. 본 연구에서는 실험적 오차에 기인하여 이를 변조전달함수, 즉 푸리에 도메인에서 실험과 분석모델을 해석하였고, 공간주파수에 미치는 영향을 분석하였다. 나아가 다양한 엑스선 영상 시스템에 있어 성능평가가 실시되어야 할 것이고, 실험적 오차는 불가결하게 발생하며 이를 허용할 수 있는 범위에 대한 검토가 이루어져야 한다.

• Investigative Magnetic Resonance Imaging
• /
• 제25권1호
• /
• pp.10-22
• /
• 2021

Purpose: To overcome the difficulty in building a large data set with a high-quality in medical imaging, a concept of 'blended-transfer learning' (BTL) using a combination of both source data and target data is proposed for the target task. Materials and Methods: Source and target tasks were defined as training of the source and target networks to reconstruct cardiac CINE images from undersampled data, respectively. In transfer learning (TL), the entire neural network (NN) or some parts of the NN after conducting a source task using an open data set was adopted in the target network as the initial network to improve the learning speed and the performance of the target task. Using BTL, an NN effectively learned the target data while preserving knowledge from the source data to the maximum extent possible. The ratio of the source data to the target data was reduced stepwise from 1 in the initial stage to 0 in the final stage. Results: NN that performed BTL showed an improved performance compared to those that performed TL or standalone learning (SL). Generalization of NN was also better achieved. The learning curve was evaluated using normalized mean square error (NMSE) of reconstructed images for both target data and source data. BTL reduced the learning time by 1.25 to 100 times and provided better image quality. Its NMSE was 3% to 8% lower than with SL. Conclusion: The NN that performed the proposed BTL showed the best performance in terms of learning speed and learning curve. It also showed the highest reconstructed-image quality with the lowest NMSE for the test data set. Thus, BTL is an effective way of learning for NNs in the medical-imaging domain where both quality and quantity of data are always limited.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.232.2-232.2
• /
• 2014

Since its discovery in 2004, graphene, a sp2-hybridized 2-Dimension carbon material, has drawn enormous attention. A variety of approaches have been attempted, such as epitaxial growth from silicon carbide, chemical reduction of graphene oxide and CVD. Among these approaches, the CVD process takes great attention due to its guarantee of high quality and large scale with high yield on various transition metals. After synthesis of graphene on metal substrate, the subsequent transfer process is needed to transfer graphene onto various target substrates, such as bubbling transfer, renewable epoxy transfer and wet etching transfer. However, those transfer processes are hard to control and inevitably induce defects to graphene film. Especially for wet etching transfer, the metal substrate is totally etched away, which is horrendous resources wasting, time consuming, and unsuitable for industry production. Thus, our group develops one-step process to directly grow graphene on glass substrate in plasma enhanced chemical vapor deposition (PECVD). Copper foil is used as catalyst to enhance the growth of graphene, as well as a temperature shield to provide relatively low temperature to glass substrate. The effect of growth time is reported that longer growth time will provide lower sheet resistance and higher VSG flakes. The VSG with conductivity of $800{\Omega}/sq$ and thickness of 270 nm grown on glass substrate can be obtained under 12 min growing time. The morphology is clearly showed by SEM image and Raman spectra that VSG film is composed of base layer of amorphous carbon and vertically arranged graphene flakes.

• 한국가시화정보학회지
• /
• 제1권2호
• /
• pp.52-57
• /
• 2003

The present paper investigated the effect of ultrasonic vibrations on the melting process of a phase-change material (PCM). The melting process in the square cavity with a heated vertical wall has been studied in terms of acoustic streaming. In the present study, applying with ultrasonic vibrations to the liquid were found to induce acoustic streaming which was clearly observed using by a particle image velocimetry (PIV) and a thermal infrared camera. The experimental results revealed that acoustic streaming could accelerate the melting process as much as 2.5 times, compared to the rate of natural melting (i. e., the melting without acoustic streaming). In addition, temperature and Nusselt numbers over time provided conclusive evidence of the important role of the acoustic streaming on the melting phenomena of the PCM.

• 한국인쇄학회지
• /
• 제21권2호
• /
• pp.21-29
• /
• 2003

In gravure printing, all of the ink in the gravure cells does not leave the cell onto the substrate. The ink transfer from plate to paper in the gravure printing was simulated by computer. A few studies have dealt with cell withdrawal with simplified Newtonian flow models however, this work was performed with the non-Newtonian inks with different simulation software.

• 한국인쇄학회:학술대회논문집
• /
• 한국인쇄학회 2007년도 추계 학술논문 발표회
• /
• pp.1-12
• /
• 2007

The rheological properties of an ink relate to its performance on the press and to the printing quality. So it is necessary to analyze the relationship between printability and the rheological properties of ink. Transfer rate of ink is one of the important factor deciding print quality. And it is concerned with rheological properties of ink. Thus, in this study, according to the molecular weight of rosin modified phenolic resin the rheological properties of ink were measured by rotational rheometer and then transfer equation of ink, density and gloss were mesured in order to examine the printability of ink.

• 대한의용생체공학회:의공학회지
• /
• 제14권4호
• /
• pp.315-320
• /
• 1993

This paper deals with a subject for implementation of L+ayer 1 and Layer 2(LAPD) of ISDN user-network interface on the basis of CCITT recommandation I.411, I.412, I.441 (Q.921), I.450(Q.930) and I.451 (Q.931) for ultrasonic image transfer. For the implementa tion of LAPD protocol of ISDN in this study. PC-CARD based hardware(TA :Terminal Adopt) is proposed and operating system (PC-XINU) supporting the Multiprocessing is transplanted to it. As the Service Access Point(SAP) is accessed by using the port of XINU and Layers which consist of transmitting and receiving part are independantly processed for each other in this proposed system. It can be easy and flexible to implement LAPD protocol for the message transfer.

• Journal of Multimedia Information System
• /
• 제3권3호
• /
• pp.47-52
• /
• 2016

This research paper examines the usage of graphic imaging in Holographic Projections to further advance the medical field. It highlights the importance and necessity of this technology as well as avant-garde techniques applied in the process of displaying images in digital holography. This paper also discusses the different types of applications for holograms in society today. Different tools were utilized to transfer a set of a cancer patient's brain tumor data into data used to produce a 3D holographic image. This image was produced through the transfer of data from one program to another. Through the use of semi-automatic segmentation through the seed region method, we were able to create a 3D visualization from Computed Tomography (CT) data.

• 한국인쇄학회지
• /
• 제2권1호
• /
• pp.23-33
• /
• 1984

천연색 사진에서 전사과정중 발색화합물을 Polaroid 사 제품과 Kodak사 제품을 선정하여 고찰하였다. 이들 화합물은 초기에 Alkali 가동이거나 불가동이었다. Alkali 가동 화합물은 분해에 의하여 상적으로는 불가동화가 요구되며 Alkali0불가동 화합물은 상적으로 가동화가 요구된다. 고찰겨과 Polaroid사 제품은 Alkali 가동을 나타내며 Kodak제품은 Alkali불가동을 나타냇다.

• 지식경영연구
• /
• 제12권5호
• /
• pp.89-100
• /
• 2011

Both industrial interest and academic research are increasingly focusing on the need to institute a business environment whereby Corporate Social Responsibility (CSR) assumes a major role. It is suggested that four kinds of responsibilities constitute total CSR: economic, legal, ethical, and philanthropic responsibilities. Consumers tend to obtain positive perceptions toward the companies which collectively or partially fulfill these responsibilities. Moreover, the company image transfer process is the influence of consumer attitudes toward certain brands on overall evaluation of the company. To understand the image transfer process, we examine the influence of CSR level evaluation on overall brand evaluation in China, where active competitions among global brands exist.