• Journal of the Korea Concrete Institute
• /
• v.19 no.1
• /
• pp.3-9
• /
• 2007

With a growing concern about the state of infrastructure worldwide, the demand for the development of reliable nondestructive testing techniques (NDT) is ever increasing. Among possible NDT techniques, microwave method is proven to be effective in fast and non-contact inspection of concrete structures and inclusions inside concrete. It is also found that the microwave method has a potential in detecting the delamination between fiber reinforced polymers (FRP) plate and concrete. On the other hand, ultrasonic method can be another way to find the delamination. In this paper, the research work needed for the development of a reliable microwave method and ultrasonic method is studied in the measurements of concrete specimens reinforced with FRP. Concrete specimens are made with FRP and artificial delamination inside. A microwave measurement system with hom antennas with high center frequency and broad frequency bandwidth are used to image inside concrete specimens for the detection of debonding between concrete and FRP. Also, ultrasonic method is used for the same condition. Both results are compared with each other.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.5
• /
• pp.369-377
• /
• 1999

Recently, it is gradually raised necessity that thickness of thin film is measured accuracy and managed in industrial circles and medical world. Ultrasonic signal processing method is likely to become a very powerful method for NDE method of detection of microdefects and thickness measurement of thin film below the limit of ultrasonic distance resolution in the opaque materials, provides useful information that cannot be obtained by a conventional measuring system. In the present research. considering a thin film below the limit of ultrasonic distance resolution sandwiched between three substances as acoustical analysis model, demonstrated the usefulness of ultrasonic signal processing technique using information of ultrasonic frequency for NDE of measurements of thin film thickness. Accordingly, for the detection of delamination between the junction condition of boundary microdefect of thin film sandwiched between three substances the results from digital image processing.

• The Research Journal of the Costume Culture
• /
• v.26 no.4
• /
• pp.613-631
• /
• 2018

The purpose of this study is to collect and analyze costumes presented in international dance sports competitions, and summarize the features of Latin American dance costumes' design. As for research methods, standards of Latin American dance costume design were analyzed via a literature review on dance sports. The scope of the study extended for six years from 2010 to 2015 to include the, top three UK Latin American dance competitions. The results are as follows. First, the silhouette analysis determined that the X silhouette to the lead with, -145 costumes (78%), followed by the H silhouette at 25 (13%), and other at 16 (9%). Amongst those there were 174 one-piece dresses (94%). Furthermore, the analysis on colors of Latin American dance sports costumes revealed that, amongst the 186 costumes, 115 were without color (62%), Bl(black) is the most frequent with 37%, then Wh(white) with 21% and Gr(gray) with 4%. Costumes with colors, based on the six basic colors in the Munsell color system, are comprised most often of red with 12%, the followed by Y(yellow) at 10%, B(blue) at 8%, YR(yellow-red) at 4%, P(purple) at 2%, and G(green) at 2%. Thirdly, the cloth materials of Latin American dance costumes are recognized through image inspection. Among visually recognizable materials, beading materials are the most common with 104 costumes (60%). Shiny materials like mesh, chiffon, organza, lace and burn-out are in 36 costumes in total (19%). Other cloth materials included Luster materials and; non-sheen materials, which were in 46 costumes (25%).

• Journal of Biosystems Engineering
• /
• v.39 no.2
• /
• pp.142-149
• /
• 2014

Purpose: A multispectral algorithm for detection and differentiation of defective (defects on apple skin) and normal Red Delicious apples was developed from analysis of a series of hyperspectral line-scan images. Methods: A fast line-scan hyperspectral imaging system mounted on a conventional apple sorting machine was used to capture hyperspectral images of apples moving approximately 4 apples per second on a conveyor belt. The detection algorithm included an apple segmentation method and a threshold function, and was developed using three wavebands at 676 nm, 714 nm and 779 nm. The algorithm was executed on line-by-line image analysis, simulating online real-time line-scan imaging inspection during fruit processing. Results: The rapid multispectral algorithm detected over 95% of defective apples and 91% of normal apples investigated. Conclusions: The multispectral defect detection algorithm can potentially be used in commercial apple processing lines.

• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.4 s.31
• /
• pp.61-68
• /
• 2004

In this paper, we suggest an automatic technique to obtain 3-D road information in complex urban areas using road pavement markings. This method is composed of following three main steps. The first step is extracting the pavement markings from aerial images, the second one is matching the same pavement markings in two aerial images, and the last one is obtaining the 3-D coordinates of those using EOP(exterior orientation parameters) of aerial images. Here, we focus on the first and second step because the last step can be performed by using the well hewn collinearity condition equation. We used geometric properties and spatial relationships of the pavement markings to extract the lane line markings on the images and extracted arrow lane markings additionally using template matching. And then, we obtained 3-D coordinates of the road using relational matching for the pavement markings. In order to evaluate the accuracy of extraction, we did a visual inspection and compared the result of this technique with those measured by digital photogrammetric system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.1
• /
• pp.63-69
• /
• 2019

The relative position of the orbital eye can be a criterion for evaluating several pathological conditions. It is especially useful to diagnose orbital fractures, thyroid eye disease, orbital tumors and to evaluate the outcome of medication and surgical treatment. Hertel and Naugle are representative measurement tools used to measure eyeball protrusion values, and have different measurement results, such as fixed orbits, every time they are inspected, even if the same inspector repeatedly measures them. Even with the same calibrator, it is inevitable that different manufacturers will change the design of the stationary part of the orbit, causing the surveyor to make a measurement error. In this paper, we designed and fabricated a protrusion measuring device using a white light interferometer and measured the protrusion of the human eye and found that the precision and repeatability were significantly higher than the manual measurement method.

• Composites Research
• /
• v.35 no.6
• /
• pp.469-476
• /
• 2022

In this paper, the microwave absorbing characteristics after the impact of the radar-absorbing structure (RAS) consisting of periodic pattern sheet (PPS) and glass fiber-reinforced plastic (GFRP) were experimentally investigated. The fabricated RAS effectively absorbed the microwave in the X-band (8.2-12.4 GHz). In order to induce the damage to the RAS, a low-velocity impact test with various impact energy of 15, 40, and 60 J was conducted. Afterward, the impact damage was observed by using visual inspection, non-destructive test, and image processing method. Moreover, the absorbing performance of intact and damaged RAS was measured by the free-space measurement system. The experiment results revealed that the delamination damage from the impact energy of 15 J did not considerably affect the microwave absorbing performance of the RAS. However, fiber breakage and penetration damage with a relatively large damaged area were occuured when the impact energy was increased up to 40 J and 60 J, and these failures significantly degraded the microwave absorbing characteristics of the RAS.

• Korean Security Journal
• /
• no.50
• /
• pp.61-87
• /
• 2017

National Assembly is a constitutional institution that is required to first consult the will of the people and it should do its effort continuously so that security of citizens using parking lot would be enhanced at the same time while improving parking service in order to increase customer satisfaction of the people. Under this recognition, in this study, Doonchi parking lot of National Assembly under consigned management was first reviewed in a perspective of criminal prevention through environmental design(CPTED) and particularly, fence installation and reinforcement work for securing 'territoriality' and operation of all round shooting camera and installation of No-trespassing warning board at entrance were suggested. Second, it was recommended to change independent control system in which CCTV security system of National Assembly Doonchi parking lot is operated separately from National Assembly safety situation room and integrate it with National Assembly safety situation room(revised to double safety system) and performance of CCTV camera was made to be increased to over 2m. In addition, video recording mode was converted to NVR mode for application to IP camera in the future and in order to avoid dead zone of security monitoring area and based on site inspection result, addition 3 places of newly installing CCTV were indicated. Third, it was recommended to introduce parking fare billing and management system through unmanned equipment in parking lot management and operation.(specialized management of professional parking service provider was reviewed). By doing so, risk of cash handling by charging personnel was removed by reducing current 7 working personnel to 3 and particularly, by converting parking lot management mode being operated temporarily from 9 A.M. to 9 P.M. at present to 24 hours operation mode and providing more specialized parking service, citizens visiting National Assembly were provided with convenience and image of National Assembly was also enhanced. This study was carried out in parallel with various literature and case studies, including data from the Office of the Defense Protection in the National Assembly.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.4
• /
• pp.105-112
• /
• 2023

In this paper, we propose a new method for displaying colored defects by measuring the relative density with the wide-area and local densities of X-ray. The relative density of one pixel represents a relative difference from the surrounding pixels, and we also suggest a colorization of X-ray images representing these pixels as normal and defective. The traditional method mainly inspects materials such as plastics and metals, which have large differences in transmittance to the object. Our proposed method can be used to detect defects such as sprouts or holes in images obtained by an inspection machine that detects X-rays. In the experiment, the products that could not be seen with the naked eye were colored with pests or sprouts in a specific color so that they could be used in the agricultural product selection system. Products that are uniformly filled with a single ingredient inside, such as potatoes, carrots, and apples, can be detected effectively. However, it does not work well with bumpy products, such as peppers and paprika. The advantage of this method is that, unlike machine learning, it doesn't require large amounts of data. The proposed method could be applied to a screening system using X-rays and used not only in agricultural product screening systems but also in manufacturing processes such as processed food and parts manufacturing, so that it can be actively used to select defective products.

• Korean Journal of Clinical Laboratory Science
• /
• v.36 no.2
• /
• pp.222-232
• /
• 2004

The sample collection room(SCR) will have much more influence than all the other departments for the improvement of hospital image, if anyone coming to the SCR in the hospital goes back with the perfect complacency and because most clients who have much stresses and fatigues pay a final visit to the SCR via receipt-diagnosis- acceptance process. SCR has improved its image for the purpose of gratifying clients, in order for clients to visit the hospital again, the quality improvement(QI) team in the Diagnosis Inspection Medical Department has come to a conclusion as follows. The degree of client gratification before improvement marks 65.9 point, but the degree after improvement was 74.2 point. Therefore, satisfaction has increased by 8.3 points. The degree of client gratification in groups before improvement marks (1) service parts-89.2 points (2) facilities and environments-49.1 point (3) toilet facilities-46.3 point. But its gratification after improvement marks (1) 92.5 point (2) 60.1 point (3) 61.0 point. Therefore the degree of satisfaction has increased by (1) 3.3 point, (2) 11.0 point, (3) 14.7 point. The progress of facility improvement plans and the exclusion of improvement on the facility contents in the hospital have made facilities and environments of SCR and toilet facilities to be poorly improved. Although service parts have a good mark, and the facilities and environments are not scoring well, the whole degree clients' gratification of SCR couldn't be helped by the low grade. Therefore the bottom line for the clients' gratification of SCR in the future is to ameliorate the facilities and environments. SCR will take the clients' gratification survey every year and if any items get low marks, that is, below 90 point throughout the survey, SCR will immediately starts the improvement work for the clients' gratification with operating the programs of controlling quality continually, and SCR should induce the operation of services, participating in the kind campaign drive for clients. So SCR will adopt the incentive system for the best staff members who perform these kinds of services.