• 대한기계학회논문집A
• /
• 제27권10호
• /
• pp.1623-1629
• /
• 2003

In this paper, the arc beam is considered as a moving disc heat source with a pseudo-Gaussian distribution of heat intensity. The solution for temperature distribution on welds is derived by using the image heat source method and the superposition method. It is general solution in that it can determine the temperature-rise distribution in and around the arc beam heat source, as well as the width and depth of the melt pool (MP) and the heat-affected zone (HAZ) in welding short lengths, where quasi-stationary conditions may not have been established. As a comparative study, the results of this analytical approach has been compared with that of the finite-element modeling. As a result, The theoretical analysis presented here has shown good consistency and is more time/cost-effective method compared with FEM.

• 복합신소재구조학회 논문집
• /
• 제6권3호
• /
• pp.69-76
• /
• 2015

The purpose of this paper is to find an limitation to detect the defect of damaged asphalt pavement structures for infrared thermography. We use heat source of a natural light to detect the defect efficiently. The heat source was applied to the asphalt specimens. Four asphalt specimens were used: one was the asphalt containing depth of 1cm internal timber, two was the asphalt containing depth of 2cm internal void, Three was the asphalt containing depth of 3cm internal timber and four was not the asphalt containing internal timber. It was found that the depth of 3cm internal timber could be detected by this method. In addition, we used the image processing to make the damage zone displayed clear in the image obtained from the thermographic operation.

• 한국소음진동공학회논문집
• /
• 제20권9호
• /
• pp.828-833
• /
• 2010

Steam leakage is one of the major issues for the structural fracture of pipes of nuclear power plants. Therefore a method to inspect a large area of piping systems quickly and accurately is needed. In this paper, we proposed the method for the detecting steam leakage by using image signal processing. Our basic idea come from heat shimmer which shine with a soft light that looks as if it shakes slightly. To test the performance of this technique, experiments have been performed for simple heat source and steam generator. Results show that the proposed technique is quite powerful in the steam leak detection.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.591-592
• /
• 2006

We studied about the manufacture of the drain-source contacts for OTFTs(organic thin-film transistors) by using screen printing method. The conductive fillers used Ag and carbon black. The conductive contacts with $100{\mu}m$ of channel length were screen printed on a silicon dioxide gate dielectric layer and, the pentacene semiconductor was deposited via vacuum deposition. As a result of studying various conductive pastes, we could obtain the OTFTs which exhibited field-effect behavior over arrange of drain-source and gate voltages, similar to devices employing deposited Au contacts. By using screen-printing with conductive paste, the contacts are processed at low temperature, thereby facilitating their integration with heat sensitive substrates.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제14권4호
• /
• pp.201-210
• /
• 2010

We propose a new robust and accurate method for the numerical solution of medical image segmentation. The modified Allen-Cahn equation is used to model the boundaries of the image regions. Its numerical algorithm is based on operator splitting techniques. In the first step of the splitting scheme, we implicitly solve the heat equation with the variable diffusive coefficient and a source term. Then, in the second step, using a closed-form solution for the nonlinear equation, we get an analytic solution. We overcome the time step constraint associated with most numerical implementations of geometric active contours. We demonstrate performance of the proposed image segmentation algorithm on several artificial as well as real image examples.

• 대한원격탐사학회지
• /
• 제27권5호
• /
• pp.573-586
• /
• 2011

MTF(modulation transfer function)는 광학 시스템의 성능을 평가하기 위하여 사용되는 중요한 파라미터 중 하나이다. 또한 열악한 우주 환경(방사능, 극한 열조건 및 전자기장 등), 대기 영향 및 시스템 성능의 저하 등으로 저하된 영상품질을 복원시켜주기 위한 파라미터로 사용될 수도 있다. 본 논문에서는 소형 지구관측위성인 DubaiSat-1이 발사된 후, 위성영상의 품질을 평가하기 위하여 MTF를 측정하였다. 일반적으로 MTF는 point source 혹은 knife-edge 방법 등과 같은 다양한 방법을 이용하여 측정되어왔다. 그러나 본 논문에서는 ISO에서 line source에 의한 MTF 측정을 표준화한 slanted-edge 방법을 이용하여 MTF를 측정하였다. Slanted-edge 방법은 전자 스틸 카메라(electronic still-picture camera)의 MTF를 측정하기 위한 ISO 12233 표준으로써, 라인스캐닝 망원경(line-scanning telescope)의 MTF를 추정하기 위하여 사용된 방법이다. 또한 PSF(point spread function) 기반으로 제작된 MTF 회선 커널(MTF convolution kernel)에 의한 MTF 보상(MTF compensation)과 영상의 노이즈 제거(image denoising)를 수행하여 영상의 품질 저하(degradation)를 완화시켰다.

• 대한조선학회지
• /
• 제12권1호
• /
• pp.59-75
• /
• 1975

The thermal stresses due to a heat source moving crosswise on a finite breadth plate, which is much more like to the practical welding problems, were studied. The temperature distributions in the plate were obtained analytically using the mirror image method, and the thermal stresses were calculated by the finite-difference method. Some numerical calculations for temperature distributions and thermal stresses were performed. The temperature distributions were also obtained by experiment. It was found that the theory was in good agreement with the result of experiment, and the calculated thermal stresses were resonable.

• 대한기계학회논문집B
• /
• 제24권2호
• /
• pp.188-194
• /
• 2000

Thermochromic liquid crystal reflect a unique color at even temperature. Therefore, they have been successfully applied to non-intrusive heat transfer research. Hue capturing method is widely used in the quantitative measurement from the TLC image. However it is affected by several measurement conditions. The distances of camera and light source have little influence on the color, but the value of hue is seriously affected by the measurement angle. In this study, the hue capturing method is improved by considering the effect of measurement angle. This improved calibration method can diminish the misreading of temperature caused by curvature of test surface.

• 전자공학회논문지S
• /
• 제35S권1호
• /
• pp.122-129
• /
• 1998

For generation and analysis of the multi-sensory image, we propose a new three dimensional (3D) modeling method considering an iternal heat source. We represent the heat conduction process within th object as an equivalent thermal circuit. Therefore, without a complex computation, our modeling approach can obtain thermal features of the object. By using the faceted model, the proposed method can express the accurate visual signatures of the object. Comparing the estimates datum with the obtained surface temperatures, we have demonstrated that the proposed method can provide a precise thermal features. The thermal images by out model is applicable to simulate a tracking loop of an IR missile.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권7호
• /
• pp.987-993
• /
• 2009

An experimental study is performed to investigate unsteady mixed convection in a horizontal channel with a heat source. Particle image velocimetry (PIV) with thermo-sensitive liquid crystal (TLC) tracers is used for visualization and analysis. This method allows simultaneous measurement of velocity and temperature fields at a given instant of time. Quantitative data of the temperature and velocity are obtained by applying the color-image processing to a visualized image, and neural network is applied to the color-to-temperature calibration. It is found that the periodic flow of mixed convection in a cavity appears at very low Reynolds numbers (Re<0.4), and the period decreases with increasing Reynolds numbers and increases with increasing aspect ratio.