• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.162-163
• /
• 2021

Currently, the depth of cracks is measured using ultrasonic detectors in maintenance practice. This method consists of measuring the depth of cracks by attaching ultrasonic depth measuring equipment to the concrete surface, and there are restrictions on the timing and location of the inspection. These limitations can be addressed through the development of image-based crack depth measurement AI technology. If crack depth measurements are made based on images, restrictions on the timing and location of inspections can be lifted because images acquired with simple filming equipment can be used as input information. To efficiently develop these artificial intelligence technologies, it is essential to identify the interrelationship between crack depth measurements and image characteristic information. Thus, this study is a basic study of the development of image-based crack depth measurement AI technology and aims to identify image characteristic information related to crack depth.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.10
• /
• pp.154-161
• /
• 2004

An experimental method for measuring side-necking deformation near a crack-tip is described. It is based on Stereoscopic Digital Speckle Photography and Digital Image Correlation, and it is simple and robust to mechanical vibration inherent to a hydraulic material test system. The validity and accuracy are evaluated through a calibration fur rigid body translation. A case study has been performed for a CT specimen made of a ductile steel and the three dimensional profiles of the side-necked region are presented as the load increases. Also, the details of the procedure and the surface treatment are discussed.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.12
• /
• pp.55-61
• /
• 2017

In this paper, we propose a novel tracking method using target separation and detection that are based on discriminative correlation filter (DCF), which is studied a lot recently. 'Retainability' is one of the most important factor of tracking. There are some factors making retainability of tracking worse. Especially, fast movement and occlusion of a target frequently occur in image data, and when it happens, it would make target lost. As a result, the tracking cannot be retained. For maintaining a robust tracking, in this paper, separation of a target is used so that normal tracking is maintained even though some part of a target is occluded. The detection algorithm is executed and find new location of the target when the target gets out of tracking range due to occlusion of whole part of a target or fast movement speed of a target. A variety of experiments with various image data sets are conducted. The algorithm proposed in this paper showed better performance than other conventional algorithms when fast movement and occlusion of a target occur.

• Journal of Advanced Marine Engineering and Technology
• /
• v.20 no.5
• /
• pp.30-38
• /
• 1996

A PIV system consisting of an image board slit into personal computer and 2-D sheet light projector is developed and related techniques to improve its performance are discussed. A grey-level cross correlation method capable of overcoming particle seeding limitation is suggested. And a sub-pixed interpolation method in determining the vector terminal is preposed by considering 8-neighbours correlation distributing patterns. Furthermore, pressure estimation from the acquired velocity vectors by applying the Poisson equation is persented with reasonable feasibility. As a practical application of the present system, evaporator flows are analysed and attained instantaneous velocity vectors reveal that the flow phenomena maintain turbulent fluctuation.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.378-381
• /
• 2002

We retrieved the aerosol optical thickness $\tau$$_{a}$ over land from Landsat-7/ETM+ image data using the correlation between the visible reflectance and middle IR reflectance. This band correlation method for aerosol retrieval was originally proposed fur MODIS data analysis by Kaufman et al.(1977). The results of retrieved aerosol optical thickness $\tau$$_{a}$ from Landsat-7/ETM+ data were compared with the simultaneous sky observation data at our study site. We found a good agreement between the retrieved and observed values. We presented the distribution maps of the aerosol optical thickness over land, retrieved from Landsat-7/ETM+ image data. Then, the surface reflectance map was also presented. The aerosol optical thickness over sea was retrieved assuming no reflected contribution from sea in the near IR band. In addition, we discussed some limitations when we apply the band correlation method.

• Computers and Concrete
• /
• v.17 no.6
• /
• pp.831-848
• /
• 2016

This study aims to characterize the multiple cracking behavior of HTPP-ECC (High tenacity polypropylene fiber reinforced engineered cementitious composites) by Digital Image Correlation (DIC) Method. Digital images have been captured from a dogbone shaped HTPP-ECC specimen exhibiting 3.1% tensile ductility under loading. Images analyzed by VIC-2D software and ${\varepsilon}_{xx}$ strain maps have been obtained. Crack widths were computed from the ${\varepsilon}_{xx}$ strain maps and crack width distributions were determined throughout the specimen. The strain values from real LVDTs were also compared with virtual LVDTs digitally attached on digital images. Results confirmed that it is possible to accurately monitor the initiation and propagation of any single crack or multiple cracks by DIC at the whole interval of testing. Although the analysis require some post-processing operations, DIC based crack analysis methodology can be used as a promising and versatile tool for quality control of HTPP-ECC and other strain hardening composites.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2003.11a
• /
• pp.201-206
• /
• 2003

In clinical practice, CT Angiography is a powerful technique for the visualziation of blood flow in arterial vessels throughout the body. However CT Angiography images of blood vessels anywhere in the body may be fuzzy if the patient moves during the exam. In this paper, we propose a novel technique for removing global motion artifacts in the 3D space. The proposed methods are based on the two key ideas as follows. First, the method involves the extraction of a set of feature points by using a 3D edge detection technique based on image gradient of the mask volume where enhanced vessels cannot be expected to appear, Second, the corresponding set of feature points in the contrast volume are determined by correlation-based registration. The proposed method has been successfully applied to pre- and post-contrast CTA brain dataset. Since the registration for motion correction estimates correlation between feature points extracted from skull area in mask and contrast volume, it offers an accelerated technique to accurately visualize blood vessels of the brain.

• Advances in aircraft and spacecraft science
• /
• v.6 no.1
• /
• pp.69-86
• /
• 2019

This paper discusses the use of the Digital Image Correlation (DIC) technique for the displacement and strain measurements of a wet lay-up composite wing. As opposed to classical strain gages, DIC allows to conduct full field strain analysis of simple to complex structural parts. In this work, wing-up bending tests and measurements of the composite wing of the Dardo Aspect by CFM Air are carried out through an ad-hoc test rig and the Q-400 DIC system by Dantec Dynamics. Also, the results are used to validate a finite element model of the structure under investigation.

• Smart Structures and Systems
• /
• v.24 no.5
• /
• pp.597-606
• /
• 2019

Damage detection based on dynamic characteristics of a structure is one of important roles in structural damage identification. It is difficult to detect local structural damage using traditional dynamic experimental methods due to a limited number of sensors used in an experiment. In this work, a non-contact test stand of fan blades is established, and a full-field noncontact test method, combined with three-dimensional digital image correlation, Bayesian operational modal analysis, and damage indices, is used to detect local damage of a fan blade under ambient excitation without use of baseline information before structural damage. The methodology is applied to detect invisible local damage on the fan blade. Such a method has a seemingly high potential as an alternative to detect local damage of blades with complex high-precision surfaces under extreme working conditions because it is a noncontact test method and can be used under ambient excitation without human participation.

• Korean Journal of Human Ecology
• /
• v.19 no.1
• /
• pp.137-147
• /
• 2010

This research was designed to compare the subjective evaluation of texture image and preference by structure and sensible characteristics of women's suits fabrics between on- and off-line. 78 subjects who majored in fashion design evaluated the sensibility image and preference of 15 various kinds of specimens on- and off-line. Factor analysis, t-test, Pearson correlation and regression were used for a statistical analysis by SPSS WIN 13.0. The results of this study were as follows: 1. Women's suits fabrics were classified according to five sensibility image factors: 'classic', 'sophisticated', 'natural', 'characteristic', and 'practical'. 2. The results of the t-test showed that there were no differences between the on- and off-line evaluation of sensibility images. 3. The analysis of correlation indicated that the 'classic'-'sophisticated' and 'natural'- 'practical' sensibility images show a significant correlation between the two kinds of evaluation. 4. The results of regression revealed that 'sophisticated', 'characteristic' and 'practical' sensibility images had an effect on the purchase preference of women's suits fabrics. 5. 'Sophisticated', 'characteristic' and 'classic' sensibility images had an effect on the tactile preference of women's suits fabrics. 6. The structural characteristics of fabrics: thickness, weave and weight had an effect on the 'classic' sensibility image. Thickness had an effect on the 'sophisticated' sensibility image and fabric count had an effect on the 'characteristic' sensibility image.