• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.3
• /
• pp.517-525
• /
• 2006

In this paper, the algorithm which improve the efficiency of surveillance in spite of the change of light is proposed and confirmed by virtue of the experiments. One of the problems for the implementation of visual surveillance system is the image processing technique to overcome with the variations of illumination lights. Some conventional systems are generally not considered the error due to the change of lights because the system use at indoor. In practical, the factors of bad image can be classified to the ghosts due to the reflection of lights and shadows in a scene. Especially weak images and noises at night are decreased the performance of visual surveillance system. In the paper, the filter which improve the images with some change of illumination lights is designed and the gabor filter is used for recognition and tracking of the moving objects. In the results, the system showed that the recognition and tracking were obtained $92\sim100%$ of recognition rate at daytime, but $80\sim90%$ of nighttime.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.20 no.1
• /
• pp.113-122
• /
• 2002

We designed the illumination optical system to use Fresnel lens which is the most general type of large aperture system. The normal construction of Fresnel lens is a thin molded piece of material, usually some kind of plastic, with one side flat and the other comprising a series of concentric segments each angled in a way to provide for optimum focusing for a pair of conjugate points. The 155 mm Marine Signal Lantern is the approved for use on buoys and a maximum omnidirectional range of 8 nmi, can be obtained with standard 12V equipment, respectively. Finally, Fresnel lens with 155 mm diameter was designed and evaluated. Also, we re-designed groove "out" of Fresnel lens and compared results of groove "in" type with groove "out" type. According to the results, Fresnel lens is obtained best optical results when grooved side faces the longer conjugate.de faces the longer conjugate.

• Journal of the Optical Society of Korea
• /
• v.19 no.1
• /
• pp.74-79
• /
• 2015

A novel color clustered optical RGB multiple-input multiple-output (MIMO) system is presented. As visible light can be divided into three primary regions of red, green and blue, data can be modulated and transmitted separately using these three color clusters. Each color cluster comprised of 30 RGB LEDs is modulated using on-off-keying (OOK), and selection combining is performed at the receiver, producing a diversity effect within that color cluster. The simulations demonstrate that the proposed RGB MIMO VLC system provides high performance via a relatively simple design of MIMO. Moreover, the proposed system ensures sufficient illumination from LEDs and offers extended distance if more LEDs are applied.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.11-13
• /
• 2007

The appearance inspection of various electronic products and parts has been executed by the eyesight of human. But inspection by eyesight can't bring about uniform inspection result. Because the appearance inspection result by eyesight of human is changed by condition of physical and spirit of the checker. So machine vision inspection system is currently used to many appearance inspection fields instead of the checker. However the inspection result of machine vision is changed by the illumination of workplace. Therefore we have used a power-law transformation in this paper. for improvement of vision inspection accuracy and could increase inspection accuracy of vision system. Also this system has been developed only using PC, CCD Camera and Visual C++ for universal workplace.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.12
• /
• pp.1094-1098
• /
• 2013

AVI (Automatic Vision Inspection) systems automatically detect defect features and measure their sizes via camera vision. Defect detection is not an easy process because of noises from various sources and optical distortion. In this paper the acquired images from a TFT panel are enhanced with the adoption of an HVS (Human Visual System). A human visual system is more sensitive on the defect area than the illumination components because it has greater sensitivity to variations of intensity. In this paper we modified an MTF (Modulation Transfer Function) in the Wavelet domain and utilized the characteristics of an HVS. The proposed algorithm flattens the inner illumination components while preserving the defect information intact.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.8 no.1
• /
• pp.21-28
• /
• 1994

It is very important and necessary to predict luminous enviroment in an interior space. This paper has described about energy saving and evaluated interior visual environment in a office building having on/off turning control lighting system utilizing daylight. In order to predict the interior varior illumination distribution, the scale model was made and examined under various conditions, such ad difference of window glass, and color pattern of wall, floor, and also ceiling lighting system type. This paper suggests that basic fundamental data of lighting design performance in the concept and schematic stages of design.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.1188-1194
• /
• 2018

This paper proposes an image enhancement-based license plate detection algorithm to improve the overall performance of system. Non-uniform illumination conditions have huge impact on overall plate detection system accuracy. In this paper, we propose an algorithm for color image enhancement-based license plate detection for improving accuracy of images degraded by excessively strong and low sunlight. Firstly, the image is enhanced by Multi-Scale Retinex algorithm. Secondly, a plate detection method is employed to take advantage of geometric properties of connected components, which can significantly reduce the undesired plate regions. Finally, intersection over union method is applied for detecting the accurate location of number plate. Experimental results show that the proposed method significantly improves the accuracy of plate detection system.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.4
• /
• pp.343-348
• /
• 2014

Face recognition system has advanctage to automatically recognize a person without causing repulsion at deteciton process. However, the face recognition system has a drawback to show lower perfomance according to illumination variation unlike the other biometric systems using fingerprint and iris. Therefore, this paper proposed a robust face recogntion method against illumination varition by slective fusion technique using both visible and infrared faces based on fuzzy linear disciment analysis(fuzzy-LDA). In the first step, both the visible image and infrared image are divided into four bands using wavelet transform. In the second step, Euclidean distance is calculated at each subband. In the third step, recognition rate is determined at each subband using the Euclidean distance calculated in the second step. And then, weights are determined by considering the recognition rate of each band. Finally, a fusion face recognition is performed and robust recognition results are obtained.

• Korean Journal of Optics and Photonics
• /
• v.12 no.3
• /
• pp.190-199
• /
• 2001

In this paper, we have researched the depth of focus (DOF) and cutoff intensity of the $0.1{\mu}m$rule dense line'||'&'||'space pattern according to the various off-axis illumination (OAl) conditions in the optical system of 0.65 NA using ArF excimer laser (193 nm). We have also studied the variation of the DOF and cutoff intensity according to the sub-resolution pattern (hammer head type) size for optical proximity correction (OPC) applied to the capacitor pattern and the various OAl conditions in the same optical system. As a result, it is revealed that the cross type quadrupole or annular illumination is preferred to the conventional X type quadrupole for printing the $0.1{\mu}m$ rule dense pattern. Also, we can investigate the optimal illumination condition and the size of ope sub-resolution pattern to keep a consistent DGF and cutoff intensity trends.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11B
• /
• pp.1403-1412
• /
• 2011

This study performed a detecting research of promising R&D field utilizing intuitive methodology regarding OLED illumination industry. For this, 69 professionals of the illumination industry in Korea were composed as a panel to hold an in-depth interview and survey for 1 month. The study classified the OLED illumination industry as 4 fields of panel, material/component for panel, manufacturing equipment, and lighting system, and selected core technology for each field, and divided it into a total of 14 possible fields for R&D. As a result of evaluating the technological competitive power for each field, the field in Korea which received the highest technological competitive power was OLED panel, and contrarily, technological competitive power of material/component for OLED panel showed the lowest, which requires improvement Meanwhile, evaluating economical aspect, conformity to policy, and effectiveness of R&D in general, 7 promising R&D fields were selected. The 4 core technologies of OLED panel, which are, white, transparent, color change and flexible OLED manufacturing technology were evaluated as the most promising fields, and next, organic material for surface light source, material/component for substrate and equipment for forming large sized substrate were evaluated as promising fields.