• 제어로봇시스템학회논문지
• /
• 제14권5호
• /
• pp.453-461
• /
• 2008

In this paper, new inspection method is proposed for the surfaces of lead frame and IC's. Optimal optical system and the accurate algorithm for the surface inspection are needed in machine vision area. The proposed optical system is composed of rectangular oblique light illumination and coaxial light illumination for the higher contrast and the results shows the better performances through experiments. The markings of IC surface are inspected using the accurate proposed method using the partitioned correlation coefficient, and the result shows reduction of under kill ratio compared to the previous method.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅳ
• /
• pp.2020-2023
• /
• 2003

In this paper, our proposed system uses the regional Gabor wavelet and Neural Network to implement face recognition similar to human face recognition system, because the Gator wavelet expresses visual recognition system of human mathematically and the regional Neural Network is robust to white noise and partial illumination. This system consists of two stages of building database and recognizing face. One is composed by using the supervised learning of Neural Network. At this time, the Neural Network is applied to the upper and the lower part of face images respectively. The Backpropagation algorithm is used to learn Neural Network. Another consists of calibration of slope of face image, measurement of illumination variant using deviation with average face image and similarity comparison using Euclidean distance measure.

• 한국컴퓨터산업학회논문지
• /
• 제10권3호
• /
• pp.99-104
• /
• 2009

본 논문에서는 형광등 on/off 제어 및 조도를 전력선 통신을 이용하여 원격으로 제어할 수 있는 시스템을 설계하고자 하였다. 각각의 조명기기를 전력선으로 구성되는 네트워크를 구현하였으며 원격 제어 및 조명기기의 on/off 및 조도를 제어하기 위하여 서버를 구성하고 서버에서 각각의 크라이언트를 제어할 수 있도록 하였다. 또한 기존 on/off 시스템을 디지털화하여 에러율을 감소시켰으며 회로를 단순화하는데 주안점을 두었다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.313-317
• /
• 2004

This paper shows the structure of a control System for Fluorescent fin Dimming Ballasts. The control system is composed of phase angle controller, a transducer, many dimmable ballasts. For the implementation of the control system, We made a controller and the transducer that transform the phase angle controlled signal into the DC level. we used the conventional dimmable ballast In this ballast, dimming control is achieved by varying the switching frequency that is controlled by the external DC level. This has non-linear illumination characteristics as the dimming control. Therefore we compensate characteristics using the transducer proposed in this paper. We measured the illumination of two FL-28 lamps with dimming controller.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.779-782
• /
• 2004

Establishing and maintaining optimum lamp operating temperature is critically important in backlight systems for large area displays. The information presented in this paper is based upon work completed for a tiled 37.5" AM LCD, plus projections for a 37.5", 42" & 50" monolithic display. Due to the size of the units, a requirement for highly collimated light and a requirement for high brightness, >550 nits at the display surface, significant wattage is required which generates high heat levels in the backlight display assembly and potentially, at the display rear surface. Uniformity of illumination becomes an important element in the system design because of the large area involved.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.737-738
• /
• 2008

An implementation of robust stereo matching algorithm under variable illumination conditions is presented in this paper. By applying window-based matchingmethod to global stereo matching algorthm using belief propagation, our implemented system shows low error rate and could efficiently cope with general radiometric disimilarities between images acquired from two different point of views.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 V
• /
• pp.2645-2648
• /
• 2003

In this paper, real-time and reconfiguable hardware filter for face recognition is proposed and implemented on FPGA chip using verilog-HDL. In general, face recognition is considerably difficult because it is influenced by noises or the variation of illumination. Some of the commonly used filters such s histogram equalization filter, contrast stretching filter for image enhancement and illumination compensation filter are proposed for realizing more effective illumination compensation. The filter proposed in this paper was designed and verified by debugging and simulating on hardware. Experimental results show that the proposed filter system can generate selective set of real-time reconfiguable hardware filters suitable for face recognition in various situation.

• 제어로봇시스템학회논문지
• /
• 제17권5호
• /
• pp.479-483
• /
• 2011

The automation of production process is actively expanding for the purpose of the cost reduction and quality assurance. Among these, automatic tracking of the product along the whole process of the production is also important topic. Typically this is done by adopting OCR technology. Conventional OCR technology operates well on the rather good quality of the image like as printed characters on the paper. In industrial application, IDs are marked on the metal surface, and this cause the height difference between background material and character. Illumination systems that guarantee an image with good quality may be a solution, but it is rather difficult to design such an illumination system. This paper proposes an algorithm for the recognition of vehicle's ID characters using edge projection and PCA (Principal Component Analysis). Proposed algorithm robustly operates under illumination change using the same parameters. Experimental results show the feasibility of the proposed algorithm.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.67-68
• /
• 2007

The introduction of high brightness LEDs with white light and monochromatic colors have led to a movement towards specialty and general illumination applications. Because drive circuit of illumination LED has an effect on efficiency and life, research about the drive circuit following LED characteristic is needed. This paper proposed a implementation of the stand-alone LED lighting system using battery from photovoltaic power generation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1964-1966
• /
• 2003

Lighting in the tunnel makes for safe driving of cars taking into account of change in perception arisen in the sight of drivers of cars entering into and passing tunnel, drivers' mental reaction and unique circumstances of a tunnel. There are many variables to satisfy safe driving in the tunnel. Since tunnels are mostly located in the mountainous area and illumination at the approach part differs largely depending on the surrounding circumstances, a standard different from that of common lighting is applied. An accidentin the tunnel, which involves same danger as in underground, may lead to a large mishap. Therefore, control by sensors inside and outside of tunnel ensures prevention of an accident through control of illumination at the approach part and inside of tunnel. It is very important in the aspect of saving energy since such control is available to reduce depreciation factor resulted from early excessive intensity of illumination.