Transactions of the Korean Society of Mechanical Engineers B
/
v.36
no.10
/
pp.979-988
/
2012
The 3D structure of GDL for fuel cells was measured using high-resolution X-ray tomography in order to study material transport in the GDL. A computational algorithm has been developed to remove noise in the 3D image and construct 3D elements representing carbon fibers of GDL, which were used for both structural and fluid analyses. Changes in the pore structure of GDL under various compression levels were calculated, and the corresponding volume meshes were generated to evaluate the anisotropic permeability of gas within GDL as a function of compression. Furthermore, the transfer of liquid water and reactant gases was simulated by using the volume of fluid (VOF) and pore-network model (PNM) techniques. In addition, the simulation results of liquid water transport in GDL were validated by analogous experiments to visualize the diffusion of fluid in porous media. Through this research, a procedure for simulating the material transport in deformed GDL has been developed; this will help in optimizing the clamping force of fuel cell stacks as well as in determining the design parameters of GDL, such as thickness and porosity.
An, Yeon Ju;Kim, Mi Jung;Han, Sang Ik;Chi, Hee-Youn;Kwon, Chang;Kim, So Yeon;Yang, Yu Jin;Kim, Yun Ju;Moon, Hee Sung;Kim, Seung-Hyun;Chung, Ill-Min
KOREAN JOURNAL OF CROP SCIENCE
/
v.65
no.4
/
pp.457-467
/
2020
Legumes are one of the largest families of crop plants and are widely consumed and produced for their nutritional and commercial benefits. Mung bean (Vigna radiata L.) is a legume crop that contains various functional compounds ; moreover, it has strong antioxidant properties and is becoming an increasingly important food crop. However, most previous studies on mung beans have focused on their primary metabolites. In this study, we investigated the composition and contents of phenolic compounds, fatty acids, soyasapogenol and tocopherol in mung beans cultivated in different regions and cultivated at different seeding dates. Material analysis was conducted using the following methods: LC-MS/MS, GC-FID and HPLC-ELSD. In total, 57 different samples were analyzed. Thirteen phenolic compounds were detected in mung beans. Of these, vitexin and isovitexin were the most abundant compounds, accounting for approximately 99% of phenolic compounds. The difference in phenol compounds according to the seeding dates of mung bean was not statistically significant. The total fatty acid content in beans was the highest in Pyeongchang. Significant differences in total fatty acid content were found according to the cultivation regions. Crops grown in Sohyeon and Dahyeon showed the highest soyasapogenol B content in the Suwon region, and these were the lowest in Jeonju. The total tocopherol content of beans cultivated in Dahyeon and Sohyeon was the lowest and highest in Pyeongchang. Soyasapogenol B and total tocopherol content were not significantly different according to seeding dates. This study was conducted to obtain basic data for the cultivation of mung beans with a high content of various functional materials in terms of regional specialization and optimal seeding time.
In order to measure the inter- and intraspecific genetic divergences within the genus Alexandrium, the variations within the internal transcribed spacer (ITS1 and ITS2) regions and 5.85 ribosomal RNA gene of eight Alexandrium species were examined for 33 strains from diverse geographical locations by direct sequencing. Five isolates of A. tamarense (AT-2, AT-6, AT-10, AT-A and AT-B) from Jinhae Bay, Korea were found to be completely identical to a Japanese strain OFX151-A. The length of the amplified ITSI-5.85-ITS2 region varied from 481 nucleotides (in A. margalefi) to 528 nucleotides (in A. affine CU1-1). ITS1 and ITS2 nucleotide lengths were negatively correlated, whereas a positive correlation was found between their G+C content. The degree of sequence divergence ranged from 0.3% (1 bp) to a maximum of 53% (305 Up). Pairwise sequence comparisons revealed a small degree of divergence between A. tamarense and A. Pundyense isolates (1.2 - 2.3% = 6-12 bp), but a high degree of divergence between A. tamarense and A. catenella (19.8% = 102 bp), and between A. catenella and A. Pundyense (19.7%). Although most nodes were weakly supported by bootstrap values, some types tend to form independent molecular groups. A. catenella isolates also formed an independent molecular sub-group, with relaticula strong bootstrap values (94% or 85% and 79% or 98%, respectively in PAUP and NJ trees). Interestingly, A. cohorticula and A. frateculus always clustered within the same sub-group, this result being supported by strong bootstrap values. Our results indicate that the ITS regions provide useful informations on hierarchical population genetic structure and a high phylogenetic resolution in intraspecific and interspecific Alexandrium population.
A study was designed to investigate the sorption characteristics of binary mixtures of NaCl and sucrose or glucose stored at various relative humidities ranging from 46% to 92%. At low relative humidity below RH 65%, the sorption equilibrium was easily achieved, whereas at higher relative humidity values over 73%, all of the mixtures tended to cintinously absorb moisture with increase in storage time. A linear equation of log $({\frac{dw}{dt}})$ = a log(t) + log(b) was found to be valid between the sorption rate and storage time with respect to storage humidities. In sucrose-NaCl mixture, the slope showed a increasing tendency as the percentage of NaCl increased in the mixture, while that of glucose-NaCl mixture failed to show a definite trend. Plateaus were obtained when the amount of water absorbed was plotted on the X axis and the percent composition of mixture on the Y axis at different storage time. The shape of plateau was varied with respect to the kind of sugar-NaCl mixture, composition of the mixture and relative humidities. A linearity was found between log(1-Aw) and the amount of water absorbed over the Aw range 0.73-0.92 and the slope was affected by the kind and composition of sugar-NaCl mixtures.
The studies on the standard plate count, most probable number(MPN) and isolation of the Enterobacteriaceae, especially Salmonella species from stream waters of Kyong-Ju city were carried out from June to July, 1988. The relationship between water temperature, weather and standard plate count were observed. The locations where all of the MPN was higher than 1,600 were Mun-chon bridge, Wol-song bridge, Go-hun bridge and the area adjoining the Hyong-san river. The higher the water temperature, the more the viable counts without rain. Bacteriological survey of the Salmonella species was performed with the total 80 specimens isolated from 16 areas which are the main streams in Kyong-Ju city. The author identified S strains(2.36%) of Salmonella typhi, 5 strains(2.3%) of Salmonella paratyphi, 2 strains(1.42%) of Salmonella paratyphi B, 63 strains(29.72%) of other Salmonella groups by biochemical tests and serotyping tests with slide agglutination.
This study compared the pork quality and muscle fiber characteristics between the Jeju black pig (JBP) and domesticated pig breeds, including three-way crossbred (Landrace ${\times}$ Yorkshire ${\times}$ Duroc, LYD), Berkshire (B), Duroc (D), Landrace (L), Meishan (M), and Yorkshire (Y) pigs. JBP had the lowest carcass weight among the pig breeds (p<0.05) and its NPPC marbling score was lower than the other domesticated pig breeds (p<0.05), except for M. M had the highest value for backfat thickness among the pig breeds (p<0.05), whereas its NPPC marbling score was the lowest (p<0.05). The pH values were higher in JBP and B at 45 min and 24 h postmortem, respectively, but LYD and M had the lowest pH values at 45 min and 24 h postmortem, respectively (p<0.05). M had a higher lightness and lower redness than the other breeds (p<0.05). Moreover, M had the highest drip loss among the pig breeds (p<0.05), whereas D had the lowest drip loss and the highest redness (p<0.05). In terms of muscle fiber characteristics, JBP and LYD had the largest type IIB fibers (p<0.05). The fiber number and area composition of type I fibers were higher in JBP than the others (p<0.05) however type IIA fibers were lowest in JBP among the pig breeds (p<0.05). Overall, our results indicate that JBP provided better pork quality compared with M, but the carcass trait and pork quality of JBP were not better than LYD and D, respectively.
Journal of the Korea Academia-Industrial cooperation Society
/
v.21
no.8
/
pp.593-602
/
2020
Power cables installed in domestic factories or underground can cause accidents depending on the manufacturing process, installation, and environmental conditions during use. When an accident occurs in a power cable, it can cause enormous economic loss and social confusion. Hence, the importance of preventive management of the cable through diagnosis is increasing to prevent it. Therefore, in this paper, a diagnostic sample cable was produced by simulating a part that could be a problem due to the installation, manufacturing defects, or deterioration of cables that can occur in the field. Dielectric loss Tangent (tan 𝛿; TD), and Partial Discharge(PD) tests were performed. Partial discharge and AC (60Hz) withstand voltage equipment using High-Frequency Current Transformer (HFCT) were applied After applying a VLF (Very Low Frequency) power supply with a frequency of 0.1Hz was applied. As a result, B and C phase defect samples at a 2.0U0 voltage through the VLF could measure the internal partial discharge in the A-phase normal sample cable from the noise at a 0.5U0 to 2.0U0 voltage. In addition, the 1.5U0 voltage was measured through the AC (60Hz) withstand voltage equipment of the commercial frequency to verify its effectiveness. Partial discharge in the run-off state was measured at a voltage of 1.0U0, and there was a risk when installing the equipment. AC power equipment showed a difficulty of movement by volume or weight. The diagnostic method, through the VLF of the quadrant state, revealed its safety and effectiveness.
In order to obtain yeast cells producing a bacteriocin OR-7, the 180 bp polynucleotide corresponding to the OR-7 gene including codons for start and stop was chemically synthesized and cloned into pAUR123, an yeast expression vector. Transformed yeast cells exhibited growth inhibition of Bacillus subtilis, Campylobacter jeuni, Escherichia coli and Pseudomonas aeruginosa. This result indicates that yeast cells producing OR-7 possess bacteriocidal properties against both Gram positive B. subtilis and Gram negative C. jejuni, E. coli and P. aeruginosa cells. The recombinant yeast strain constructed in this study can be applied in the food preservative or animal feed.
Transactions of the Korean Society of Mechanical Engineers B
/
v.36
no.9
/
pp.931-935
/
2012
In this study, we fabricate and investigate low-temperature solid oxide fuel cells with a ceramic substrate/porous metal/ceramic/porous metal structure. To realize low-temperature operation in solid oxide fuel cells, the membrane should be fabricated to have a thickness of the order of a few hundreds nanometers to minimize IR loss. Yttrium-doped barium zirconate (BYZ), a proton conductor, was used as the electrolyte. We deposited a 350-nm-thick Pt (anode) layer on a porous substrate by sputter deposition. We also deposited a 1-${\mu}m$-thick BYZ layer on the Pt anode using pulsed laser deposition (PLD). Finally, we deposited a 200-nm-thick Pt (cathode) layer on the BYZ electrolyte by sputter deposition. The open circuit voltage (OCV) is 0.806 V, and the maximum power density is 11.9 mW/$cm^2$ at $350^{\circ}C$. Even though a fully dense electrolyte is deposited via PLD, a cross-sectional transmission electron microscopy (TEM) image reveals many voids and defects.
Transactions of the Korean Society of Mechanical Engineers B
/
v.36
no.2
/
pp.171-179
/
2012
Cooling of hot sections, especially the turbine nozzle and rotor blades, has a significant impact on gas turbine performance. In this study, the influence of precooling of the cooling air on the performance of gas turbines and their combined cycle plants was investigated. A state-of-the-art F-class gas turbine was selected, and its design performance was deliberately simulated using detailed component models including turbine blade cooling. Off-design analysis was used to simulate changes in the operating conditions and performance of the gas turbines due to precooling of the cooling air. Thermodynamic and aerodynamic models were used to simulate the performance of the cooled nozzle and rotor blade. In the combined cycle plant, the heat rejected from the cooling air was recovered at the bottoming steam cycle to optimize the overall plant performance. With a 200K decrease of all cooling air stream, an almost 1.78% power upgrade due to increase in main gas flow and a 0.70 percent point efficiency decrease due to the fuel flow increase to maintain design turbine inlet temperature were predicted.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.