• 한국추진공학회지
• /
• 제15권2호
• /
• pp.23-28
• /
• 2011

제트연료변경에 따른 엔진 운용 특성 변화를 살펴보기 위해 JP-8 연료와 JP-S 연료를 사용하여 소형터 보제트엔진의 지상시험 및 고도시험을 수행하였다. 비중이 18% 높은 JP-S 연료에 대한 연료조절시스템 특성은 동일 연료공급명령에 대한 실 연료공급량이 JP-8 연료보다 8% 많이 공급되었다. 시동특성은 연료조절시스템의 명령 대비 공급량의 차이로 인한 점화시점 및 엔진 회전수 가속율 등의 변화를 제외하고는 유사한 특성을 보였다. 정상상태 성능 특성은 순 추력의 일부 구간을 제외하고는 순 추력과 공기유량, 배기가스온도 등 대부분의 엔진 성능 변수가 1% 이내로 유사하였으나 연료소모량만은 연료의 발열량 차이로 인해 최대 5 %이상 차이가 발생하였다. 이를 동일 추력 대비 비 연료소모율로 비교할 때 지상시험에서는 약 1.1~2.6 %, 고공환경시험에서는 5 % 이상 차이가 발생하였다.

• 한국추진공학회지
• /
• 제24권2호
• /
• pp.1-13
• /
• 2020

Zr을 원료로하는 점화제와 ZrNi를 원료로 하는 지연제로 구성된 파이로테크닉스의 노화현상을 열적/화학적/광학적으로 분석하였다. 열적 분석에는 Differential Scanning Calorimetry (DSC) 와 Thermogravimetry Analysis(TGA)를 통해 열 기반의 반응식을 규명했다. DSC의 결과로 수행한 픽 분석기법 (peak deconvolution)을 통해 각 연료의 노화에 따른 열적 변화를 분석하였다. 화학종 변화 분석에는 Laser Induced Breakdown Spectroscopy (LIBS)와 X-ray Photoelectron Spectroscopy (XPS)를 사용하였다. 수분에 의한 산화제의 분해가 연료의 노화에 크게 영향을 미쳤으며, 열에너지 감소의 원인은 연료 표면의 산화막 형성과 산화금속의 형성으로 나타났다.

• 동력기계공학회지
• /
• 제12권4호
• /
• pp.5-11
• /
• 2008

The RI gasoline engine haying a sub-chamber had a high cycle variation due to the difficulty of the residual gas scavenge in the sub-chamber. To solve this problem and improve the combustion performance of RI engine, we devised a method to inject directly CNG fuel into the sub-chamber. A DI diesel engine of single cylinder was converted into a RI-CNG engine and an electronic control unit for the engine was manufactured. In this study, the combustion characteristics of the RI-CNG engine were investigated with the injection timings and air excess ratios at the load conditions of 50% throttle open rate and 1700rpm. As the results from this study, the RI-CNG engine worked reliably under the condition of the ignitable lean limit of $\lambda=1.7$ by showing the $COV_{imep}$ below about 5%. And the highest thermal efficiency could be obtained in the injection timing that produced the high imep and the low $COV_{imep}$ at the same time. The CO emission concentration indicated very low values and the THC and $NO_x$ showed an opposite pattern. With a view to improving the thermal efficiency and reducing the harmful emissions, the proper control region of the ignition timing and the mixture ratio were nearly ATDC $20^{\circ}\sim50^{\circ}$ and $\lambda=1.4$ respectively.

• Journal of Trauma and Injury
• /
• 제30권4호
• /
• pp.145-157
• /
• 2017

Purpose: We accessed epidemioloy of 908 acute burns (7 years) in the military, of injuries and propose proper educational programs to suit community. Methods: We surveyed burn demographics, circumstances of injuries, size, result of treatment. Results: The mean age was 20.6 years. The flame burns (FB) (325, 35.8%) were most common, followed scald (SB) (305, 33.6%), contact (CB) (219, 24.1%), electric (EB) (45, 5.0%) and chemical burns (ChB) (14, 1.5%). The more occurred during winter (29.7%). SB had mean 3.9% total body surface area (TBSA). The 251 (82.3%) had superficial burns by spillage of hot water/food on lower limbs (45.6%), feet (33.8%) in summer (34.8%), treated with simple dressing (92.8%). Morbidity rate was 5.6%; post traumatic stress disease (PTSD) (0.7%). FB had large wound (9.3% TBSA). The 209 (64.3%) had superficial burns by ignition to flammable oils (31.7%) and bomb powders (29.2%) on head/neck (60.3%), hands (58.6%) in summer (31.7%), autumn (30.2%). They underwent simple dressing (83.4%) and skin graft (16.0%). Morbidity rate was 18.8%; PTSD (10.5%), inhalation injuries (4.0%), corneal injury (3.7%), amputations (0.9%), and mortality rate (1.2%). CB had small (1.1% TBSA), deep burns (78.5%) by hotpack (80.4%) on lower limbs (80.4%). The more (59.8%) underwent skin graft. EB had 6.8% TBSA. The 29 (64.4%) had superficial burns by touching to high tension cable (71.1%) on hand (71.1%), upper limbs (24.4%) in autumn (46.8%). They underwent simple dressing (71.1%) and skin graft (24.4%). They showed high morbidity rate (40.0%); loss of consciousness (13.3%), nerve injuries (11.1%), neuropathy (8.9%), amputations (2.2%), and mortality rate (2.2%). Conclusions: The cook should wear apron over the boots during work. The lighter or smoking should be strictly prohibited during work with flammable liquids or bomb powders. Don't directly apply hotpack to skin for a long time. Use insulating glove during electric work. Keep to the basic can prevent severe injury and proper education is important.

• 한국화재소방학회논문지
• /
• 제11권1호
• /
• pp.3-9
• /
• 1997

화재시 설내의 열적성충의 형성을 연구하기 위하여 쓰레기통, 의자, 카페트, 소파, 매트리스 및 장 농의 화재실험을 실제건물에서 수행하였다. 카페트와 같은 균퉁분산 가연물화재의 경우는 초기 점화기 간과 성장기의 기간이 화재 전기간에 비하여 매우 짧고, 최성기는 매우 길게 나타났다. 반면에 쓰레기 통, 매트리스 및 장농과 같은 집중 가연물화재의 경우는 초기점화기간과 성장기가 매우 길게 나타났다. 쓰레기통과 같은 위에서 아래인 한쪽 방향으로만 연소하는 경우는 봉우리가 하나로 나타났고, 의자, 소 파, 매트리스 및 장농과 같은 연소방향이 다양한 화재의 경우는 봉우리가 2개이상 나타났다. 어느 화재 의 경우나 경계면이 뚜렷이 나타났고, 상부충의 온도는 거의 일정하며 경계면 높이는 가구화재시 모두 1 l[m] 근처에서 일정한 상태값을 유지하였다. 다만, 최대온도를 나타내는 시간에는 경계면 높이가 바 닥에서 O.2S[m]내지 O.7S[m]까지도 내려왔다.

• 한국화재소방학회논문지
• /
• 제25권3호
• /
• pp.57-62
• /
• 2011

본 논문에서는 한옥 부재로 사용되는 육송을 대상으로 도포법과 상압함침법의 방염처리 방법을 적용하여 각 연소특성을 평가하였다. 도포 처리는 시험체 표변에 2-3회 붓칠한 후 24h 건조하는 것을 3회 반복하였고, 상압함침 처리는 시험체를 약제 속에 72h 동안 함침시켜 처리하였다. 연소특성 평가방법으로는 멕켈버어너를 사용한 방염성능 시험, 콘칼로리미터를 사용한 열방출률 시험방법을 적용하였다. 시험 결과 방염성능에 있어서 두 가지 방법으로 처리한 시험체는 모두 현재 합판에 대한 성능기준을 만족하였으며, 상압함침 처리보다는 도포 처리한 시험체의 방염성능이 더 우수하게 나타났다. 열방출률 시험 결과로는 착화까지의 시간, 최대열방출률, 질량감소율 총방출열량 등의 지수에서 상압함침 처리보다는 도포 처리한 시험체가 더 높은 성능을 보였다.

• 전기학회논문지
• /
• 제58권12호
• /
• pp.2446-2452
• /
• 2009

A Ceramic Metal-halide lamp is achieved by adding multiple metals to a basic mercury discharge. Because the vapor pressure of most metals is very much lower than mercury itself, metal-halide salts of the desired metals, having higher vapor pressures, are used to introduce the material into the basic discharge. The metal compounds are usually polyatomic iodides, which vaporize and subsequently dissociate as they diffuse into the bulk plasma. Metals with multiple visible transitions are necessary to achieve high photometric efficiency and good color. Compounds of Sc, Dy, Ho, Tm, Ce, Pr, Yb and Nd are commonly used. The maximum visible efficacy of a Ceramic Metal Halide lamp, under the constant of a white light source, is predicted to be about 450lm/W. This is controlled principally by the chemical fill chosen for a particular lamp. Current these lamps achieve 130lm/W and these life time are the maximum 16,000[hr]. So factors of performance lower are necessary to improve lamp performance. In this paper, we analyzed factors of performance lower by accelerated deterioration test. The lamp was operated with short duration turn-on/turn-off procedure to enhance the effect due to electrode sputtering during lamp ignition. The tested lamp that was operated with a longer turn-on/off(20/20 minutes) showed blackening, changed distance between electrodes and lowered color rendering & color temperature by losses of Dy at 421.18nm, I at 511nm, T1 at 535nm and Na at 588nm compared with the new lamp.

• 한국안전학회지
• /
• 제32권2호
• /
• pp.38-45
• /
• 2017

This paper is an experimental study to find an optimal detection method for detecting fire early in a rack-type warehouse stored with goods. In this study, we constructed rack-type structure with the fourth floor of 13.5 m high and conducted fire experiments which were to measure flow of heat/smoke in rack-type structure and response time of fire detectors. The detectors used at experiments were fixed temperature type detectors, rate of rise detectors, photoelectric smoke detectors, air sampling smoke detectors and flame detectors. The used ignition sources are n-heptane fire for response of heat detection and cotton fire for response of smoke detection. The fixed temperature type detectors, rate of rise detectors and photoelectric detectors were installed to every rack level respectively. The results show that the rate of rise detector should be installed every 2 levels and photoelectric smoke detector should be installed every 4 levels for the early stage fire detection. Air sampling smoke detectors can detect fire early in response to control of sensitivity, but there is a problem in false alarm. The fixed temperature detector is not suitable for early stage fire detection in warehouse and flame detector not worked if flame is not visible, so it need to install combination with other detector.

• 폴리머
• /
• 제24권6호
• /
• pp.777-786
• /
• 2000

본 연구에서는 범용 열가소성 수지인 폴리프로필렌 (virgin polypropylene, VPP)과 폴리프로필렌을 주성분으로 하는 재생플라스틱의 난연성을 향상시키기 위하여, 난연제 decabromodiphenyl oxide (DBDPO)와 chlorinated paraffin wax (CPW)를 혼합하여 이것들의 난연 특성을 정량적으로 비교 분석 연구하였다. 난연성 평가 측정으로 콘 칼로리미터 (cone calorimeter, ASTM E1354, ISO 5660), 한계산소지수 측정 (LOI, ASTM D2863, ISO 4589) 등을 사용하였고, 콘 칼로리미터를 이용하여 DBDPO와 CPW의 난연효율을 정량적으로 측정하였다. 콘 칼로리미터의 결과로 난연제의 난연효율을 측정한 결과, DBDPO가 CPW보다는 약 2배의 난연효율을 가지고 있다는 것을 확인하였고, 한계산소지수 측정 결과와 유사한 난연효율을 보임을 확인하였다. 열중량 분석 (TGA) 측정결과 난연제 DBDPO를 첨가하였을 때 약 30~5$0^{\circ}C$의 열분해 온도의 상승을 확인할 수 있었다.

• 한국수산과학회지
• /
• 제39권spc1호
• /
• pp.132-141
• /
• 2006

Artificial structures have been designed as pilot structures to promote the creation and restoration of tidal flats. However, little information is available as to whether such artificial construction affects the macrobenthic community structure. We monitored the variation of the macrobenthic community structure and species composition near natural and artificial structures (seaweed and a timber fence) on the tidal flats near the Iwon Dike, Korea. In total, 137 macrobenthic species were recorded during this study, predominantly crustaceans (47%), polychaetes (18%), and molluscs (27%). Polychaetes comprised over 50% of the total density, followed by gastropods (38%) and crustaceans (11%). Macrobenthic species composition in the artificial and natural areas, was initially similar, but it differed after 7 months. The gastropod Umbonium thomasi, the most dominant species, was present at both sites in the first month after the start of the experiment, but disappeared at the artificial sites within 7 months, suggesting disturbance by the environmental factors. The number of species and diversity (H') varied significantly within sites at the beginning of the experiment, but no difference was observed after 7 months. Multivariate analysis (multidimensional scaling) revealed significant differences in community structure between the artificial and the natural areas from 7 months after the start of the experiment, except from 18 to 21 months. The community structures were mainly influenced by U. thomasi. Community structure at the artificial sites was affected by environmental variables, such as carbon, COD/IL sulfide, loss of ignition, kurtosis and silt, which changed over time. We observed no significant correlations between environmental variables and the dominant species, except in the case of Spio sp. and Macrophthalmus dilatatus, suggesting that the biological interactions and temporary disturbances such as typhoon, as well as the effects of artificial structures may also be important regulating factors in this system.