• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.705-706
• /
• 2010

킥모터 점화기의 점화 초기 연소 특성에 대한 설계 해석 결과 초기 압력 조건에 따라 100~500 ms 범위의 점화지연이 생기는 것으로 나타났다. 개발 시험에서 점화기가 점화 초기 주 추진제를 점화시키는데 충분한 에너지를 공급할 수 있다는 것을 검증하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권4호
• /
• pp.551-559
• /
• 1998

Evaporation and ignition characteristics of fuel droplet have major influences on the efficiency and performance of engine. In the present study the experiment of evaporation and self-ignition of single fuel was performed under the various ambient conditions. An individually suspended droplet of n-heptane n-hexadecane ethyl-alcohol and light oil were employed as a liquid droplet. Evaporation and ignition characteristics were measured by using the video-camera and image processing technique under the various ambient temperatures (up to 1000310 OC)and partial pressure of oxigen(up to 60%) The evaporation curve shows that the droplet life time ignition delay time decreases as the ambient temperature and partial pressure of oxigen increase, The temperature variations of droplet were also reported for various fuel and ambient temperatures. The numerical simulations were carried out to predict droplet diameter and temperature with favorable agreement.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.51-52
• /
• 2022

In previous studies, fire simulation was used to estimate the fire spread path. According to previous studies, the fire spread path was estimated to be the main staircase, but consideration of interior materials and internal bulkheads was insufficient. In this study, the ignition time of the 3rd layer was analyzed using the prediction formula considering the interior materials and internal bulkheads. As a result of referring to the architectural drawings, it was found that the interior material of the 3rd floor was made of polystyrene. The internal ignition time of the third floor using FDTs was calculated to be 14,070 seconds (about 234 minutes). The internal ignition time of the 3rd floor using the Handbook on Design Calculation Methods of Fire Behavior was calculated to be 3,104 seconds (about 51 minutes). As a result of calculating the ignition time through the predictive formula, there is a large difference in the ignition time, so it is necessary to review the condition of the variable as a result of the calculation in the future.

• 한국가스학회지
• /
• 제25권2호
• /
• pp.1-12
• /
• 2021

MILD(Moderate or Intense Low-oxygen Dilution) 연소는 열에너지 분야에서 배출되는 미연 탄소와 질소 산화물을 저감하기 위한 기술로, 친환경 열 에너지 생산 기술로 평가받고 있다. MILD 연소 기술은 반응물의 예열을 통한 자발화 현상을 이용하여, 연소 반응 영역을 확장시키는 것이 핵심이다. 본 연구는 CH₄와 공기를 활용하여 반응물의 초기 온도 변화와 CO, H₂의 혼합율에 따른 CH₄의 점화 지연 시간을 수치 해석적 접근을 통해 분석하였다. 점화 지연 시간은 초기 온도와 H₂ 혼합율이 높을수록 감소하였고, CO 혼합율이 높을수록 증가하였다. 이는 H₂ 첨가 시 초기에 높은 분율의 HO₂가 메틸 라디칼(CH₃)의 분해 반응을 촉진시켜 OH를 생성하였기 때문이며, CO 첨가 시 HCO 생성에 따른 H 라디칼 소모가 증가했기 때문이다. 하지만 HCO의 생성은 점화 지연 시간에 큰 영향을 주지 않았다. 또한 연료 내 CO와 H₂를 30% 혼합한 조건에서는, NO 배출량이 각각 7%, 1% 증가하는 경향을 보였다. 이는 CO를 혼합한 조건에서 초기에 높은 NCO가 NO 생성반응률 증가에 영향을 미쳤기 때문이다.

• 대한화학회지
• /
• 제48권1호
• /
• pp.12-16
• /
• 2004

에탄올-산소-아르곤 혼합기체의 점화 과정을 반사 충격파를 이용 1281-1625 K의 온도 범위 및 0.69-1.06 bar 압력 범위에서 고찰하였다. 점화지연시간은 급격한 압력변화와 광 방출 스펙트럼으로부터 측정하였으며, 에탄올 및 산소 기체의 농도 그리고 반응온도에 따른 점화지연시간의 의존관계를 나타내는 실험식을 구할 수 있었다. 실험결과 에탄올 점화 과정에서 연료인 에탄올의 농도가 커지면 점화지연시간이 길어지는 경향을 보였으며, 이는 메탄올 점화 과정에서 메탄올의 농도가 증가하면 점화 과정이 짧아지는 것과는 다른 경향이었다. 그리고 에탄올 점화 과정에 관하여 보다 자세히 고찰하기 위해 다양한 에탄올 연소반응 메카니즘을 이용하여 모델 연구를 수행하였다.

• 한국안전학회지
• /
• 제23권5호
• /
• pp.73-78
• /
• 2008

The fire hazards and combustion heat of puzzle mats in group day care home were analysed using variable external irradiation level. The fire hazards such as ignition time, ignition temperature, mass loss rate, and flame temperature profile were measured. Incident heat fluxes of $15kW/m^2$, $20kW/m^2$, $25kW/m^2$, $35kW/m^2$, $50kW/m^2$ and $75kW/m^2$ were selected for these experiments. All samples were tested in the horizontal orientation and were wrapped in a single layer of aluminium foil. Each sample was nominally 20mm thick and 100mm square. Five samples of puzzle mat were tested in the study : Type A, B, C, D and E. Type A, B and C are all general grades whereas Type D and E are both Flame retardant grades. As results, Type E of FR-grade showed the best characteristics in safety of the early fire from ignition time, critical heat flux, and ignition and flame temperature data of this study. All specimen of G-grade(Type A, B and C), however, showed the weak in safety of fire.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
• /
• pp.279-281
• /
• 2012

A short chemical mechanism was developed with the chemical model reduction strategy based on the use of Simulation Error Minimization Connectivity Method(SEM-CM). We examined the accuracy resulting from using this mechanism, as compared with the full mechanism, for premixed flames and auto-ignition of methane-air mixture under high pressures. These comparisons are in good agreement, but it has a little divergence to predict the ignition delay time at high pressure conditions as compared with experiment results.

• 한국연소학회지
• /
• 제22권1호
• /
• pp.8-13
• /
• 2017

Ignition delay time of methane/oxygen mixture is measured experimentally with the shock tube in order to obtain the data for high pressure conditions where gas turbines and internal combustion engines are operating. The shock tube experiment is validated first over the temperature range of 1400-2000 K at 10 bar and with the various equivalence ratios of 0.5, 1 and 2. The measured ignition delays are compared with the data from the literatures. And then, experiments are conducted for non-explored conditions, i.e., at 40 bar and with the equivalence ratio of 1.5. The present experimental data show a good agreement with the available ones from the literatures and reasonable dependence on pressure and equivalence ratio. In addition, the effects of the temperature and equivalence ratio on ignition delay time are analyzed.

• Journal of the Korean Wood Science and Technology
• /
• 제30권3호
• /
• pp.18-25
• /
• 2002

Research to discuss the fire performance of materials requires tools for measuring their burning characteristics and validated fire growth models to predict fire behavior of the materials under specific tire scenarios using the measured properties as input for the models. In this study, burning characteristics such as time to ignition, weight loss rate, flame spread, heat release rate, total heat evolved, and effective heat of combustion for four types of wood-based materials were evaluated using the cone calorimeter and inclined panel tests. Time to ignition was affected by not only surface condition and specific gravity of the tested materials but also the type and magnitude of heat source. Results of weight loss rate, measured by inclined panel tests, indicated that heat transfer from the contacted flame used as the heat source into the inner part of the specimen was inversely proportional to specific gravity of material. Flame spread was closely related with ignition time at the near part of burning zone. Under constant and severe external heat flux, there was little difference in weight loss rate and total heat evolved between four types of wood-based panels. More applied heat flux caused by longer ignition time induced a higher first peak value of heat release rate. Burning characteristics data measured in this study can be used effectively as input for fire growth models to predict the fire behavior of materials under specific fire scenarios.

• 대한기계학회논문집
• /
• 제19권12호
• /
• pp.3352-3359
• /
• 1995

An Eulerian-Lagrangian method is employed to simulate the ignition process and the flame propagation through the air/fuel spray mixture in a closed constant-volume combustor. The spray mixture is ignited by providing a hot wall at the end of the combustor or by firing the electric spark. The investigated parameters involve the initial droplet size, overall equivalence ratio, initial fuel vapor concentration, distance between the hot wall and the nearest droplet, and the ignition energy. Numerical results clearly show the existence of the optimum spray condition for minimizing the ignition energy and the ignition delay time as well as the critical dependence of ignition upon the distance of the heat source to the nearest droplet.