• 제목/요약/키워드: Ignition sequence

검색결과 28건 처리시간 0.023초

Determination of Cyclogram for Liquid-Propellant Rocket Engine

  • Ha, Seong-Up;Kwon, Oh-Sung;Lee, Jung-Ho;Kim, Byoung-Hun;Kang, Sun-Il;Han, Sang-Yeop;Cho, In-Hyun;Lee, Dae-Sung
    • International Journal of Aeronautical and Space Sciences
    • /
    • 제3권2호
    • /
    • pp.59-66
    • /
    • 2002
  • A vertical test stand based on launcher propulsion system was constructed and several tests for the determination of cyclogram were carried out. To make an accurate estimation, static and dynamic pressures were measured and analyzed. Especially, static pressure measurements using fast response sensors without extension tubes were used to determine operation sequence more evidently. The standard operation times of final valves were determined in cold flow tests with an engine head, and fire formation time in combustion chamber was checked in an ignition test with an ignitor only. On the basis of these tests, ignition sequence was established and combustion test cyclogram was finally determined. According to combustion test, test results were well matched with the determined cyclogram within 0.05 sec.

ESS (에너지 저장장치) 배터리 화재사례를 통한 감식기법 및 연소 확산방지에 관한 연구 (A Study on the Identification Technique and Prevention of Combustion Diffusion through ESS (Energy Storage System) Battery Fire Case)

  • 이정일
    • 한국재난정보학회 논문집
    • /
    • 제16권2호
    • /
    • pp.383-391
    • /
    • 2020
  • 연구목적 : 에너지 저장실의 외부 화염에 의한 내부자기 점화 및 점화를 식별하고, 과열로 인한 점화와 외부 열원에 의한 점화의 차이를 분석하는 것이다. 연구방법 : 분리막 녹는점 측정, 배터리 외부 수열 실험, 배터리 과충전 실험, 과충전과 외부수열에 의한 연소 시 전극 판 비교분석, 과충전 연소 특징, 외부수열 화재 연소특징, 3.4(전극판 비교)/ 3.5(과충전)/ 3.6(외부수열) 분석 실험을 하였다. 연구결과: 화재 발생 시까지 센서의 위치에 따른 온도 차이가 극심했음으로 기존처럼 한 모듈 당 온도 센서 두 개로는 측정값이 부족해 온도제어를 통한 화재를 사전에 방지할 수 없다고 판단한다. 결론: 단락이 점화원으로 작용하여 혼합가스에 착화돼 가스폭발이 발생하고, 폭발 압력에 의해 전극이 잘게 파손되며, 가루형태의 리튬산화물이 불꽃반응에 의해 폭죽과 유사한 불꽃이 분출되었다.

액체로켓엔진 연소기 산화제 선공급 Cyclogram에 의한 점화특성 (Ignition Characteristics of Combustion Chamber with $LO_X$ Lead Cyclogram for Liquid Rocket Engine)

  • 한영민;김종규;이광진;임병직;안규복;김문기;서성현;최환석
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2008년도 제31회 추계학술대회논문집
    • /
    • pp.137-142
    • /
    • 2008
  • 액체로켓엔진 재생냉각 연소기에서 산화제 선공급 cyclogram시의 점화 특성에 대해 기술하였다. 연소기의 연소압력은 60 bar, 추진제 유량은 약 89 kg/s 그리고 노즐 팽창비는 12이다. 산화제 선공급 cyclogram을 위해 수행한 연소기로의 연료 및 산화제 수류시험, 산화제 선공급에 따른 점화기 작동성 확인을 위한 점화시험, 연소기의 주 점화 및 연소 확인을 위한 저압 연소시험 그리고 설계점에서 연소기 작동성/연소 안정성 및 연소성능/재생냉각 성능 확인을 위한 연소시험 등에 대해 기술하였다. 산화제 선공급 점화 및 연소시험은 성공적으로 이루어졌으며 연소기에 대한 안정적인 점화 cyclogram을 개발하였다.

  • PDF

디젤엔진조건에서 DME분무의 연소특성 해석 (Parametric Study of DME Spray Combustion Characteristics in the Diesel-like Condition)

  • 배준경;강성모;김용모
    • 한국분무공학회지
    • /
    • 제14권4호
    • /
    • pp.163-170
    • /
    • 2009
  • The present study has numerically investigates the vaporization, auto-ignition and combustion processes in the high-pressure and high-temperature conditions encountered in the diesel engine. In the present study, in order to understand the overall spray combustion characteristics of DME fuel as well as to identify the distinctive differences of DME combustion processes compared to conventional hydrocarbon liquid fuels, the sequence of the comparative analysis has been systematically made for DME and n-Heptane liquid fuels. Computations for DME fuel are made for two cases including constant fuel mass flow rate condition and fixed heat release rate. Based on numerical results, the discussions are made for the detailed combustion processes of DME and n-Heptane spray.

  • PDF

AC PDP의 배경광 잔상특성 (Characteristics of Image Sticking Observed During Background Display in AC-PDP)

  • 류재화;임성현;김동현;김중균;이호준;박정후
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제53권2호
    • /
    • pp.91-96
    • /
    • 2004
  • In darkroom condition, it was observed that a white picture pattern lasted several minutes leaves a recognizable trace in subsequent black background picture. Although this is not a serious problem for the most current public display or home TV applications, the image sticking should be minimized for future high quality multimedia display applications. In order to characterize this picture memory effect having relatively long time scale, spatially resolved luminance measurement and light waveform measurement have been performed. Pixels located at the outer boundary of white pattern previously displayed shows highest luminance. These cells also shows fastest ignition at the ramp up reset sequence. The luminance and ignition voltage differences between boundary cells and the other cells are increased with display duration and number of sustain-pulse. It is speculated that image sticking observed at the boundary cell is originated from the transport of charged particles and re-deposition of reactive species such as Mg, O provided from strong sustain discharge region.

비행시퀀스제어기법을 적용한 점화통제시스템 구현 (The implementation of the firing control system considering a flight sequence control technique)

  • 이승재
    • 한국추진공학회지
    • /
    • 제12권3호
    • /
    • pp.41-48
    • /
    • 2008
  • 고체추진기관의 지상연소시험시 점화통제시스템은 추진기관의 점화를 위해 착화기에 점화전류를 공급하여 추진기관을 연소시키는 것이 기존의 주요기능이었다. 본 논문에서는 다양한 방식의 점화 이벤트와 비행 시퀀스를 제어하고 검증할 수 있는 지상연소시험용 점화통제시스템에 대한 설계 및 구현에 대해 기술하였다.

터보펌프식 액체 로켓 엔진의 시동 과도 특성 해석 (Analysis of Transient Characteristics for Turbopump-fed Liquid Propellant Rocekt Engine in Start-up)

  • 손민;김덕현;구자예
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2010년도 제34회 춘계학술대회논문집
    • /
    • pp.34-37
    • /
    • 2010
  • 터보펌프식 액체 로켓 엔진에 대해 AMESim을 이용하여 1-D 시스템을 구성하고 시동 과도 특성을 해석하였다. 액체산소와 RP-1을 추진제로 사용하는 개방형 사이클에 대해 해석을 수행하였으며, 초기 시동시 가스발생기의 연료 밸브 개방 및 가스발생기 점화 타이밍과 시동 안정성의 관계에 관한 결과를 얻었다. 이러한 연구를 바탕으로 터보펌프식 액체 로켓 엔진 시스템의 최적 설계를 위해 시동시 특성 및 시동 절차를 고려해야 함을 확인 하였다.

  • PDF

DME 및 n-Heptane 연료의 디젤엔진 조건에서 분무연소특성 해석 (Numerical Study on the Characteristics of Spray Combustion Processes in the DME and n-heptane Fueled Diesel-like Engine Conditions)

  • 유용욱;석준호;이상길;김용모
    • 한국분무공학회지
    • /
    • 제13권2호
    • /
    • pp.91-98
    • /
    • 2008
  • In the present study, in order to understand the overall spray combustion characteristics of DME fuel as well as to identify the distinctive differences of DME combustion processes against the conventional hydrocarbon liquid fuels, the sequence of the comparative analysis have been systematically made for DME and n-heptane liquid fuels. To realistically represent the physical processes involved in the spray combustion, this studyemploys the hybrid breakup model, the stochastic droplet tracking model, collision model, high-pressure evaporation model, and transient flamelet model with detailed chemistry. Based on numerical results, the detailed discussions are made in terms of the autoignition, spray combustion processes, flame structure, and turbulence-chemistry interaction in the n-heptane and DME fueled spray combustion processes.

  • PDF

암모니아 플라즈마 표면처리를 통한 그래핀의 질소도핑 (Graphene Doping by Ammonia Plasma Surface Treatment)

  • 이병주;정구환
    • 한국표면공학회지
    • /
    • 제48권4호
    • /
    • pp.163-168
    • /
    • 2015
  • Graphene has attracted much attention due to its remarkable physical properties and potential applications in many fields. In special, the electronic properties of graphene are influenced by the number of layer, stacking sequence, edge state, and doping of foreign elements. Recently, many efforts have been dedicated to alter the electronic properties by doping of various species, such as hydrogen, oxygen, nitrogen, ammonia and etc. Here, we report our recent results of plasma doping on graphene. We prepared mechanically exfoliated graphene, and performed the plasma treatment using ammonia gas for nitrogen doping. The direct-current plasma system was used for plasma ignition. The doping level was estimated from the number of peak shift of G-band in Raman spectra. The upshift of G-band was observed after ammonia plasma treatment, which implies electron doping to graphene.

한국형발사체 연소기 연소시험설비의 구축 및 시운전 (Construction and Start-up Test of Hot-firing Test Facility for KSLV-II Combustion Chamber)

  • 이광진;이승재;서대반;황창환;우성필;임지혁;전준수;소윤석;김채형;김성혁;김승한;조남경;한영민
    • 한국추진공학회지
    • /
    • 제20권1호
    • /
    • pp.69-75
    • /
    • 2016
  • 본 논문은 한국형발사체 연소기 연소시험설비의 구축과 시운전 결과를 다루고 있다. 이 시험설비는 2012년부터 2014년까지 구축되었고, 2014년 하반기에 시운전이 수행되었다. 시운전 과정에는 산화제 수류시험, 연료 수류시험, 냉각수 수류시험 등이 수행되었고, 이후 점화시험이 이루어졌다. 점화시험 결과는 연소기의 시동시퀀스를 설정하는데 적용되며, 저압연소시험과 설계점 연소시험을 위한 기초자료로 활용되게 된다.