• 에너지공학
• /
• 제13권2호
• /
• pp.161-165
• /
• 2004

Evaporative emissions from gasoline powered vehicles continue to be a major concern. The performance of carbon canister in evaporative emission control systems has become an important aspect of overall fuel system development and design. A vehicle's evaporative emission control system is continuously working, even when the vehicle is not running, due to generation of vapors from the fuel tank during ambient temperature variations. In this study, the effects of evaporative emissions on the engine performance were investigated. The experimental results show the effectiveness of this system for future exhaust emissions and enhanced evaporative emissions. This paper discusses the evaluation on the relationship between carbon canister condition and engine performance while engine is running.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권5호
• /
• pp.76-85
• /
• 2000

Stirling cycle was actualized as so called ‘hot air engine’. It has been focused again lately as one of measures for exhaust gas emission problem, but as small power engine because of its method of heat addition. Recently marine power plants commenced to meet a stringent environmental restrictions by international convention, Marpol so that diesel engines as main and auxiliarly power plants are urged to be reformed to reduce NOx emission. Author devised a compression ignition engine as a large marine power plants combined with turbo charger based on stirling cycle, and analyzed the performance by means of basic thermodynamic calculation. Analyzed in this paper, were theoretical efficiency, mean effective pressure, required equivalence ratio, gas turbine power ratio, maximum pressure, states of turbo-charger inlet gas and exhaust gas, manifesting that the engine could be proposed as one of the future power plants of marine use.

• 한국자동차공학회논문집
• /
• 제11권2호
• /
• pp.16-21
• /
• 2003

Natural gas is one of the promising alternative fuels because of the abundant deposits and the cleanness of emission gas. It can be used in conventional gasoline engine without major modification. Natural gas has some advantages than gasoline i.e. the high octane number, good mixing condition because of gas and wide inflamable limit. In the present study, a $1.8{\ell}$ conventional gasoline engine is modified for using the CNG as a fuel instead of gasoline. Performance and emission characteristics are compared between gasoline and CNG with 4 cylinder SI Engine which is controlled by programable ECU. Parameters of experimentation are equivalence ratio, spark timing and fuels. We analyzed the combustion characteristics of the engine using the cylinder pressure i.e. ignition delay, combustion duration and cycle variation. As a result, CNG engine shows lower exhaust emissions but brake torque is slightly reduced compared to gasoline engine. Overall combustion duration is longer than that of gasoline because of lower burning speed.

• 한국자동차공학회논문집
• /
• 제12권6호
• /
• pp.80-89
• /
• 2004

In order to confront the increasing air pollution and the tightening emission restrictions, this research developed a diesel engine using DME, the advanced smoke-free alternative fuel. By numerical analysis, flow field, spray, and combustion phenomenon of the DME engine was presented. Using an experimental method, the configuration of the fuel supply system and operation/power performance was tested with the current plunger pump. Most emission performance, especially smoke performance was significantly improved. The possibility of conversion from the current diesel engine into the DME engine was affirmed in this research. However, it was found that the increase of engine RPM and fuel amount need to be properly adjusted through matching the characteristics of fuel and injector for further improvement.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.519-524
• /
• 2008

A numerical study is conducted to investigate propulsion performance enhancement based on S225 experiment case of ISL(French-German Research Institute of Saint-Louis)'s superdetonative ram accelerator. For govern equation, multi-species Navier-Stokes equation coupled with Baldwin-Lomax turbulence modeling is used. Govern equation is discretized by Roe's FDS and integrated by LU-SGS time integration. Detailed chemical reaction about $H_2/O_2/CO_2$ for high pressure is considered. $2H_2+O_2+2.5CO_2$ mixture was used for propellant gas. For the same over-driven factor, the launching speed of computation was faster than one of S225. Another configuration and condition of S225 was applied. A flame structure is very different from S225. For strong mixture case, it shows ignition by viscous effect. Acceleration and speed increment is higher than S225 computation and experiment. By using more strong mixture, propulsion performance was enhanced.

• 한국산업융합학회 논문집
• /
• 제22권3호
• /
• pp.259-264
• /
• 2019

In this study, we experiment by making and designing of compression ignition diesel engine witch has air cooling, 2-cylinder and 2-strokes. Also, we make controller witch can control injection timing and period by arbitrary manual operation for change of injection timing. We also study experimentally in change about pressure and power of combustion chamber by increasing density of air which comes into cylinder because of increasing scavenging pressure. Through this, we confirmed that output change and scavenging pressure can develop performance of the engine by scavenging efficiency of a chamber and development of volume efficiency.

• 한국가스학회지
• /
• 제14권1호
• /
• pp.8-14
• /
• 2010

본 연구에서는 LPG/바이오디젤 혼합연료의 직접분사식 디젤엔진 적용성에 관한 실험을 수행하였다. 특히, 혼합연료를 엔진에 적용하는 경우 엔진성능, 배출가스 (미연탄화수소, 일산화탄소, 질소산화물, 이산화탄소), 연소안정성에 대한 실험을 1,500 rpm의 엔진회전수 조건에서 수행하였다. 바이오디젤은 질량대비 20-60% 범위로 LPG에 혼합하였다. 바이오디젤을 40% 이상 혼합하는 경우 엔진은 모든 부하영역에서 매우 안정적으로 연소되었다. 바이오디젤의 혼합율이 증가할수록 혼합연료의 세탄가가 향상되어 연소시작 시점이 진각되었다. 혼합연료를 사용하면 저부하에서는 과혼합에 의한 부분연소로 인하여 THC와 CO의 배출량이 급증하였으며, NOx의 경우 저부하에서는 배출량이 디젤연료에 비해서 낮았으며 고부하에서는 더 많이 배출되었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제30회 춘계학술대회논문집
• /
• pp.353-358
• /
• 2008

현재 인하 로케트 연구회에서는 소형 로켓 모터 점화를 위해 흑색화약 및 PVA수지를 혼합하여 점화기를 제작하고 있다. 하지만 제작 과정의 모호함으로 인해 그 성능이 일정하지 않아, 점화기로서 부족한 점으로 지적되고 있다. 따라서 흑색화약 및 PVA수지의 혼합비에 따른 연소 특성을 파악하여 추진제 점화기 요구 조건 충족 조건을 실험적으로 확인하였다. 특히 추진제 점화기의 요구 조건인 추진제 점화 온도 및 안정 연소 압력 조성에 대하여 중점적으로 다루었으며, 산화제와 연소 촉매의 비율에 따른 연소 가스의 온도 및 압력 변화를 통해 그 경향성을 알 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권1호
• /
• pp.37-47
• /
• 2002

Recently gasoline direct injection method has been applied to gasoline engine to reduce fuel consumption rate by controlling fuel air mixture on lean condition by means of stratified charging, and to reduce simultaneously. Pollutant emissions especially NOx and CO by lowering the combustion temperature. But difficulty of controling local fuel air ratio at ignition area in flammability limit unavoidably appeared, because it is merely controlled by injection timing with spatial and temporal distribution of fuel mixture. In this study, the authors devised a uniquely shaped combustion chamber so called three-chamber GDI engine, intended to keep the more reliable fuel air ratio at ignition area. The combustion chamber is divided into three regions. The first region is in the rich combustion division, where the fuel is injected from the fuel injection valve and ignited by the spark plug. The second region is in the lean combustion division, where the combustion gas from the rich combustion division flows out and burns on lean condition. And the last region is in the main combustion division ie in the cylinder, where the gas from the above two combustion divisions mixed together and completes the combustion during expansion stroke. They found that the stable range of operation of three-chamber GDI engine on low-load condition exists in the lean area of average equivalence ratio. And they also found that the reformed engine reveals less specific fuel consumption and less pollutant emissions compared with conventional carburettor type gasoline engine.

• 한국항공우주학회지
• /
• 제43권8호
• /
• pp.712-721
• /
• 2015

펄스데토네이션엔진은 넓은 작동 범위와 높은 열효율로 인하여 잠재력 있는 미래 추진기관 시스템으로 연구되어왔다. 이러한 잠재력을 개선하기 위하여 지난 10여 년간 다양한 요소 기술들에 대한 연구가 진행되었다. 고주파수의 환경에서 PDE를 안정적으로 작동시키기 위하여, inflow-driven 밸브, 회전 밸브 등을 포함하는 새로운 밸브 시스템과 무밸브 시스템이 개발되었다. 작은 점화 에너지로 빠르게 데토네이션을 발생시키기 위하여 플라즈마 점화 방법과 경사 장애물 기술과 같은 DDT 가속 방법이 연구되었다. 또한 PDE 추진 성능 극대화를 위하여 유체노즐 등의 노즐 시스템도 진행 중인 연구 주제의 하나이다. 본 논문에서는 지난 수년간 개발된 PDE의 최신 부체계 핵심 기술에 대하여 소개하고자 한다.