A Study on the Combustion and Exhaust Gas Characteristics of Single Cylinder Engine for DME and Diesel

DME와 디젤 단기통 엔진의 연소 및 배출가스 특성에 관한 연구

  • 김현철 (자동차부품연구원 첨단동력-IT종합연구센터) ;
  • 강우 (자동차부품연구원 첨단동력-IT종합연구센터) ;
  • 김병수 (자동차부품연구원 첨단동력-IT종합연구센터) ;
  • 박상훈 (자동차부품연구원 첨단동력-IT종합연구센터) ;
  • 정재우 (자동차부품연구원 첨단동력-IT종합연구센터) ;
  • 박종호 (충남대학교)
  • Published : 2004.11.01

Abstract

In order to confront the increasing air pollution and the tightening emission restrictions, this research developed a diesel engine using DME, the advanced smoke-free alternative fuel. By numerical analysis, flow field, spray, and combustion phenomenon of the DME engine was presented. Using an experimental method, the configuration of the fuel supply system and operation/power performance was tested with the current plunger pump. Most emission performance, especially smoke performance was significantly improved. The possibility of conversion from the current diesel engine into the DME engine was affirmed in this research. However, it was found that the increase of engine RPM and fuel amount need to be properly adjusted through matching the characteristics of fuel and injector for further improvement.

Keywords

References

  1. S. Y. Lee and Y. D. Choi, 'NumericalSimulation of Swirling Turbulent Flows in theCylinder of a Diesel Engine,' Transactions of KSAE, Vol.7, No.1, pp.38-49, 1999
  2. P. Kapus and H. Ofner, 'Development of Fuelinjection Equipment and Combustion Systemfor DI Diesel Operated on Dimethyl Ether,'SAE 950062, 1995
  3. S. Kajitani, Z. L. Chen, and Konno, K. T. Rhee,'Engine Performance and Exhaust Charac-teristics of Direct-injection Diesel EngineOperated with DME,' SAE 972973, 1997
  4. Y. D. Pyo, G. C. Kim, Y. J. Lee and M. H. Kim, 'A Study on Performance and Exhaust Emissions of DI Diesel Engine Operated with Neat DME and DME Blended Fuels,'Transactions of KSAE, Vol.11, No.2, pp.75-82, 2003
  5. T. Yoshizaki, K. Wakai, K. Vishida and H.Hiroyasu, 'Experimental and NumericalAnalysis on Spray Tip Penetration of DMESpray,' 7th Symposium(ILASS-Japan) onAtomization, Gunma, Japan, Dec. 21-23,pp. 184-188, 1998
  6. K. Wakai, K. Nishida, T. Yoshizaki and H.Hiroyasu, 'Spray Characteristics of Dimethyl Ether from a DI Diesel Injection Nozzle,'Transactions of JSAE, Vol.30, No.l, pp.41-47,1999
  7. J. S. Hwang, J. S. Ha and S. Y. No, 'SprayCharacteristics of DME in Common RailInjection System,' Proc. of Busan EngineInternational Symposium 2001, Busan, Korea,Dec.12-14,pp.139-144, 2001
  8. J. Yu, J. Lee and C. Bae, 'Dimethyl EtherSpray Characteristics Compared to Diesel in a Common-rail Fuel Injection System,' SAE2002-01-2898, 2002
  9. D. W. Gill and H. Ofner, 'Dimethyl Ether aClean Fuel for Transportation,' SAE 990959,1999
  10. M. Konno, S. Kajitani, M, Oguma, T. Lwaseand K. I. Shima 'NO Emission Characteristicsof a CI Engine Fueled with Neat DimethylEther,' SAE 1999-01-1116, 1999
  11. M. Konno, S. Kajitani, M, Oguma, T. Lwaseand K. I. Shima 'NO Emission Characteristicsof a CI Engine Fueled with Neat DimethylEther,' SAE 1999-01-1116, 1999
  12. S. Kajitani, Z. L. Chen, and Konno, K. T. Rhee,'Engine Performance and Exhaust Characte-ristics of Direct-injection Diesel Engine Ope-rated with DME,' SAE 972973, 1997
  13. S. C. Sorenson, R. Christenesn, M. G. Jensenand K. F. Hansen, 'Engine Operation on Dimethyl Ether in a Naturally Aspirated, DI Diesel Engine,' SAE 971665, 1997