• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.729-732
• /
• 2008

Complexity and Massive is the modem trend of construction project. The lack of timely and accurate construction data is the main cause for the lack productivity increases seen in other industries. Because information is essential in the construction production process, the lack of it will cause workers to stay idle, build the wrong thing that has to be redone, become involved in an accident or simply waste their time doing non-productive work. To aid construction automation and improve its productivity, RFID technology system should be developed. As a result of that, this study analyzes the status of RFID technologies in construction project and suggest advanced construction method. USN and RTLS system is analyzed in this study RFID system also can be used in construction management, material management, quality control, safety management and human resource management.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.10
• /
• pp.77-83
• /
• 2004

In low-power VLSI systems, it is effective to suppress leakage current by shutting down megablocks in idle states. Recently, multi-threshold voltage CMOS (MTCMOS) is widely accepted to shutdown power supply. However, it requires short wake-up time as operating frequency increases. This causes large current surge during wake-up process, and it often leads to system malfunction due to severe Power line noise. In this paper, a novel wake-up scheme is proposed to solve this problem. It exploits pipelined wake-up strategy in several stages that reduces maximum current on the power line and its corresponding power line noise. To evaluate its efficiency, the proposed scheme was applied to a multiplier block in the Compact Flash memory controller chip. Power line noise in shutdown and wake-up process was simulated and analyzed. From the simulation results, the proposed scheme was proven to greatly reduce the power line noise compared with conventional schemes.

• Journal of the Korea Computer Graphics Society
• /
• v.21 no.5
• /
• pp.29-36
• /
• 2015

Human fingers are essential parts of the body that perform complex and detailed motion. Expression of natural finger motion is one of the most important issues in character animation research. Especially, keyboard typing animation is hard to create through the existing animation pipeline because the keyboard typing typically requires a high level of dexterous motion that involves the movement of various joints in a natural way. In this paper, we suggest a method for the generation of realistic keyboard typing motion based on physics simulation. To generate typing motion properly using physics-based simulation, the hand and the keyboard models should be positioned in an allowed range of simulation space, and the typing has to occur at a precise key location according to the input signal. Based on the observation, we incorporate natural tendency that accompanies actual keyboard typing. For example, we found out that the positions of the hands and fingers always assume the default pose, and the idle fingers tend to minimize their motion. We handle these various constraints in one solver to achieve the results of real-time natural keyboard typing simulation. These results can be employed in various animation and virtual reality applications.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.1
• /
• pp.73-79
• /
• 2010

Deck plates have been widely used for steel framework due to their merits in terms of schedule reduction and work repetition. For this reason, most of the previous studies related to deck plates have focused on the development of form type and their constructability. In this study, through an actual case study and interviews with experts, a simulation model was developed using the CYCLONE method. Based on this model, this study not only analyzed the productivity of the work process of the deck plate in steel framework, but also identified the occurrence of idle time in the work process. In addition, using a sensitivity analysis, productivity and duration could be analyzed according to variation of input resources. Based on the results, this paper suggests a way to improve the productivity of deck plate work in steel frameworks. Using the model, it is expected that project managers would be able to predict the productivity and total duration of the deck plate work in the early project phase, which will enable managers to make an appropriate plan for input resources.

• Journal of IKEEE
• /
• v.21 no.3
• /
• pp.174-184
• /
• 2017

This paper proposes a torque predictive control for dynamic performance improvement of clamping force in electro-mechanical brake (EMB) for railroad cars. In general, pneumatic braking system (PBS) is used for railroad cars. It is sensitive depending on environmental changes and it has increasing idle running time because of slow dynamic response. Additionally, the PBS has low braking efficiency in case braking torque more than standard value is applied to the brake system such as emergency braking. In order to overcome these disadvantages of the PBS, the EMB is used for the railroad cars. The EMB for railroad cars has advantages that increasing the fuel efficiency and design flexibility because it is able to decrease vehicle weight of railroad cars and secure space for design. In this paper, control method for dynamic performance improvement of clamping force in EMB for railroad car is proposed. The effectiveness of the proposed control method is verified by the simulation results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.10
• /
• pp.2389-2396
• /
• 2014

Spectrum handoff is the process of exchanging progressing data transmission from the current channel to another idle channel. The essential goal of spectrum handoff in CR(Cognitive Radio) networks is to perform consistent data transmission while sustaining performance of ongoing transmission of secondary users. This handoff procedure can cause additional latency that eventually affects on the performance of CR transmission. Channel prediction method is expected to avoid the disruption to primary users and to reduce the handoff latency. In this paper, adaptive channel prediction is proposed to cope with time-varying channel and an adaptive channel prediction based proactive handoff procedure is designed to enhance data transmission performance.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.11
• /
• pp.831-835
• /
• 2009

Volunteer computing is a computing paradigm in which the operations of a large-scale application are processed using idle resources of Internet-connected computers. The redundant-work distribution techniques used in the volunteer computing environment cause some problems like delay of the work completion time or inefficiency of the work execution due to continuous requests of the work redistribution because the techniques do not consider the characteristics of works and dynamic resources. To cope with such problems this paper suggests a P2P based regional matchmaking technique which can redistribute works in consideration of the characteristics of the works and the participant resources. The techniques consist of the profiles for works/resources, the module for monitoring the available resources spaces, the protocols for the matching request/reply, the module for match-ratio calculation, and so on.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.1
• /
• pp.457-470
• /
• 2021

The banking system provides a number of important functions for the economy and is also the lifeblood and financier of the economy in each country. Large amounts of idle money have not been exploited by banks; however, banks still depend on loans, including loans from foreign banks, to meet the growing demand, as such, for banks, the cost of capital is high, the stability and business efficiency are low and banks have not promoted their internal resources to grow steadily. To achieve the goal, this research analyzes the factors affecting the choice of bank for the deposit decisions of customers in Vietnam. The study used a sample data of 250 individuals and SPSS software was used to analyze the data. The results showed that customer policy has a positive effect on customers' deposit decisions in a bank, and this is new evidence regarding behavioral theory in the case of Vietnam. Results further demonstrated that other factors such as employee image, brand, interest rate, relative influencing, and transaction time positively impact the choice of bank for the deposit decisions of customers. However, the bank's promotion strategies had no impact on the choice of bank for the deposit decisions of customers. Besides, employee image is the most influential factor in the deposit decisions, followed by the bank's brand and interest rate.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.14 no.1
• /
• pp.113-119
• /
• 2004

Exponentiation is widely used in practical applications related with cryptography, and as the discrete log is easily solved in case of a low exponent n, a large exponent n is needed for a more secure system. However. since the time complexity for exponentiation algorithm increases in proportion to the n figure, the development of an exponentiation algorithm that can quickly process the results is becoming a crucial problem. In this paper, we propose a parallel exponentiation algorithm which can reduce the number of rounds with a fixed number of processors, where the field elements are in GF($2^m$), and also analyzed the round bound of the proposed algorithm. The proposed method uses window method which divides the exponent in a particular bit length and make idle processors in window value computation phase to multiply some terms of windows where the values are already computed. By this way. the proposed method has improved round bound.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.7
• /
• pp.981-988
• /
• 2022

The intelligent production plant called smart factories that apply information and communication technology (ICT) are collecting data in real time through various sensors. Recently, researches that effectively applying to these collected data have gained a lot of attention. This paper proposes a method for the tool condition monitoring based on the sound signal generated in machining process. First, it not only detects a fault tool, but also presents various tool states according to idle and active operation. The second, it's to represent the power spectrum of the sounds as images and apply some transformations on them in order to reveal, expose, and emphasize the health patterns that are hidden inside them. Finally, the contrast-enhanced PSD image obtained is diagnosed by using CNN. The results of the experiments demonstrate the high discrimination potential afforded by the proposed sound PSD image + CNN and show high diagnostic results according to the tool status.