• Tunnel and Underground Space
• /
• v.30 no.4
• /
• pp.320-334
• /
• 2020

This study presents an application of hydro-mechanical coupled Particle Flow Code 3D (PFC3D) to simulation of fluid injection induced fault slip experiment conducted in Mont Terri Switzerland as a part of a task in an international research project DECOVALEX-2019. We also aimed as identifying the current limitations of the modelling method and issues for further development. A fluid flow algorithm was developed and implemented in a 3D pore-pipe network model in a 3D bonded particle assembly using PFC3D v5, and was applied to Mont Terri Step 2 minor fault activation experiment. The simulated results showed that the injected fluid migrates through the permeable fault zone and induces fault deformation, demonstrating a full hydro-mechanical coupled behavior. The simulated results were, however, partially matching with the field measurement. The simulated pressure build-up at the monitoring location showed linear and progressive increase, whereas the field measurement showed an abrupt increase associated with the fault slip We conclude that such difference between the modelling and the field test is due to the structure of the fault in the model which was represented as a combination of damage zone and core fractures. The modelled fault is likely larger in size than the real fault in Mont Terri site. Therefore, the modelled fault allows several path ways of fluid flow from the injection location to the pressure monitoring location, leading to smooth pressure build-up at the monitoring location while the injection pressure increases, and an early start of pressure decay even before the injection pressure reaches the maximum. We also conclude that the clay filling in the real fault could have acted as a fluid barrier which may have resulted in formation of fluid over-pressurization locally in the fault. Unlike the pressure result, the simulated fault deformations were matching with the field measurements. A better way of modelling a heterogeneous clay-filled fault structure with a narrow zone should be studied further to improve the applicability of the modelling method to fluid injection induced fault activation.

• Journal of agricultural medicine and community health
• /
• v.36 no.2
• /
• pp.87-100
• /
• 2011

Objectives: This study aimed to identify factors associated with smoking relapse. Methods: The study sample was recruited among subjects who were enrolled in the smoking cessation clinic of a public health center and had succeeded in quitting smoking for at least six months. A total of 159 male subjects were followed via mail survey one year later. The independent variables in the analyses were socio-demographic characteristics, smoking history and behavior, receipt of smoking cessation aids, health behaviors and components of the health belief model (HBM). The dependent variable was smoking relapse assessed one year after quitting. Ordered logit regressions were used to identify factors associated with smoking relapse. Results: The relapse rate of the ex-smokers in our sample was 25.8%, and the occasional smoking rate was 17.0%. Univariate analyses revealed that only factors related to the HBM, such as perceived susceptibility to diseases (p<0.01), perceived severity of diseases (p<0.01), perceived health benefits of not smoking (p<0.01), perceived barriers to quitting smoking due to increasing stress and difficulty in social life (p<0.01), and self-efficacy (p<0.01) were associated with the likelihood of relapse for ex-smokers. Ordered logit analyses yielded two significant factors affecting the likelihood of relapse, the perceived barriers to quitting smoking and self-efficacy. Conclusions: Our results indicate that higher levels of barriers to quitting smoking and lower levels of self-efficacy were significantly related to risk of smoking relapse. These findings may be useful for identifying those at highest risk for relapse and choosing the optimal strategies for prevention of relapse for ex-smokers.

• Korean Journal of School Psychology
• /
• v.17 no.1
• /
• pp.65-86
• /
• 2020

The purpose of this study was to examine whether self-differentiation mediates the relationship between adolescents' family functioning and self-esteem and to examine whether peer support and family conflicts had moderated mediating effects. For this purpose, 522 students from four high schools in Gyeonggi province were surveyed about their family functioning, self-differentiation, self-esteem, and peer support. The results were analyzed using SPSS 21.0 and PROCESS. The mediating, modulating, and moderated mediating effects were analyzed. The results of this study were as follows. First, correlation analysis showed that family functioning, self-differentiation, self-esteem, and peer support were significantly positively correlated. Second, the moderated mediating effects of peer support were as follows. First, self-differentiation had a partial mediating effect in the relationship between family functioning and self-esteem such that family functioning and self-differentiation were positively correlated and self-differentiation and self-esteem were positively correlated. Second, peer support had a moderating effect in the relationship between family functioning and self-differentiation that promoted self-differentiation. Thus, peer support affected family functioning and self-differentiation. Third, verifying the moderated mediating model of peer support by combining the mediation model of self-differentiation and the moderation model of peer support identified above showed that self-differentiation mediated the relationship between family functioning and self-esteem. Thus, family support affected self-differentiation and self-differentiation affected self-esteem. The significance of this study was as follows. First, it showed that self-differentiation significantly mediated the relationship between family functioning and self-esteem, clarifying the relationship between family functioning and self-esteem. Second, it showed that peer support moderated the relationship between family functioning and self-differentiation, identifying a mechanism that promotes self-differentiation. Third, it showed the mediation of self-differentiation of the relationship between family functioning and self-esteem depended on peer support.

• Journal of Service Research and Studies
• /
• v.13 no.2
• /
• pp.62-81
• /
• 2023

The purpose of this study is to propose policies to improve and revitalize rural bus services in Jeollabuk-do in the future by identifying the factors that affect service satisfaction and policy satisfaction and the relationship between them, targeting rural bus users in 4 cities and counties in Jeollabuk-do. In the four cities and counties in the study area, the number of rural bus users is continuously decreasing, and various transportation policies, such as unification of bus fares and demand-response transportation, are being piloted to promote bus use. In this study, three major service quality factors that affect rural bus service satisfaction and policy satisfaction were derived after a literature review. Modifying the research model presented in previous studies, we have presented a research model to verify the relationship between the three factors affecting service satisfaction and policy satisfaction, and the relationship between service satisfaction and policy satisfaction. For the verification of the research model, a total of 520 survey data collected from passengers near bus stops and bus terminals in four cities and counties, Gochang, Gimje, Buan, and Jeongeup, were used. As a result of the verification, it was found that the three factors of economic feasibility, convenience, and safety had a statistically positive (+) effect on service satisfaction, but only convenience and safety had a positive (+) effect on policy satisfaction. Contrary to the research hypothesis, it was found that there was no statistically significant relationship between service satisfaction and policy satisfaction. Although the result is different from the research hypothesis, it was a meaningful result that can make policy suggestions on the improvement of the unified fare system policy, service satisfaction, and policy satisfaction to Jeollabuk-do rural bus transportation policy makers and working-level officers. In conclusion, based on the results of research analysis, the unified fare system, and transportation policy, measures to improve service satisfaction and policy satisfaction were presented.

• 한국노년학
• /
• v.30 no.4
• /
• pp.1359-1375
• /
• 2010

Expecting the expansion of the elderly population under long-term home care with the coming of the aged society, this study purposed to propose a prevention and self-reliance support model and to get practical implications for minimizing dependency on care benefits and enhancing the effectiveness of prevention and self-reliance support. Research methods employed for this study were: first, reviewing theoretical literature for clarifying the concept of prevention and self-reliance support in providing long-term care benefits for the elderly; second, identifying factors hindering prevention and self-reliance support through analyzing standard long-term care use plans and documents related to long-term care benefits at elderly welfare centers to which the research subjects belonged; and third, surveying care benefit users on factors hindering their use of prevention and self-reliance support and their needs in the use of care benefits. Based on the results of the three types of qualitative research, we proposed directions for prevention and self-reliance support modeling and suggested practical implications for enhancing the effectiveness of prevention and self-reliance support. For this study, we collected documentary materials and conducted in-depth interviews with the participants with the consents and cooperation of managers and professional social workers at day care centers and elderly welfare centers in D City. According to the results of this study, literature review suggested that long-term care prevention and self-reliance support should be provided in a way of 'strengthening user-centered support systems,' which support elderly long-term care beneficiaries' right to lead a life as the subject of their own life. Document analysis found the absence of benefits related to health and medicine and lack of social support systems for prevention and self-reliance support, and the results of in-depth interviews suggested the necessity to strengthen services related to elderly long-term care beneficiaries' prevention and self-reliance, and the keen needs of the long-term care elders for prevention and self-reliance included: ① loneliness, anxiety, fear; ② missing for and worry about children and people; ③ moving, outing; ④ health and medical services, rehabilitation programs; ⑤ desire to use day care; ⑥ inconvenience of house structure; ⑦desire for meal menus; and ⑧ the occurrence of disuse syndrome. Based on these results, we suggested the base of prevention and self-reliance support modeling with three axes: ① strengthening user-centered support systems; ② strengthening support systems connected to health and medicine; and ③ strengthening social support systems.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.17 no.5
• /
• pp.151-168
• /
• 2022

Nowadays companies are required to achieve social goals beyond maximizing shareholder profits. Accordingly, it is important to pursue both the economic and social goals of a company at the same time. Thus the importance of hybrid organizations is increasing theoretically and practically. In particular, since hybrid organizations essentially have the complexity of pursuing both economic and social purposes, the institutional demands of various stakeholders surrounding hybrid organizations are also conflicting. Several previous studies have considered how hybrid organizations respond to these conflicting institutional demands, but most studies are limited to studying at a specific point in time. As a result, there was a limit to analyzing the dynamics in response to conflicting institutional demands as the hybrid organization expanded its business. This study predicted that the hybrid organization would take selective coupling with conflicting institutional demands and that the process of responding to institutional demands would change according to the organization's growth. In this study, we had a case study about Noul and Enuma, social ventures that operate relatively advanced business models with outstanding results in innovation and technology. As a result, social ventures show a selective coupling for conflicting institutional demands, and the selective coupling process changes as their business model are advanced. Specifically, in the early stages of the business, it appears to respond to economic and social demands at the same time with a single business model. When the business is advanced, two or more business models are operated, some of which respond to economic needs and some of which respond to social needs. In the early stages of business, social ventures respond to economic and social demands with a single business model to gain legitimacy and survive in the institutional demands. But when they enter the business growth period, they try to separate business models which respond to economic and social values because they pursue sustainable growth and challenge large-scale missions. Overall, this study attempted to contribute to an in-depth understanding of hybrid organizations by identifying that the method of responding to conflicting institutional demands varies depending on the growth process of social ventures.

• Proceedings of the KOR-KST Conference
• /
• 1995.02a
• /
• pp.101-113
• /
• 1995

The objective of this research is to test the feasibility of developing a statewide truck traffic forecasting methodology for Wisconsin by using Origin-Destination surveys, traffic counts, classification counts, and other data that are routinely collected by the Wisconsin Department of Transportation (WisDOT). Development of a feasible model will permit estimation of future truck traffic for every major link in the network. This will provide the basis for improved estimation of future pavement deterioration. Pavement damage rises exponentially as axle weight increases, and trucks are responsible for most of the traffic-induced damage to pavement. Consequently, forecasts of truck traffic are critical to pavement management systems. The pavement Management Decision Supporting System (PMDSS) prepared by WisDOT in May 1990 combines pavement inventory and performance data with a knowledge base consisting of rules for evaluation, problem identification and rehabilitation recommendation. Without a r.easonable truck traffic forecasting methodology, PMDSS is not able to project pavement performance trends in order to make assessment and recommendations in the future years. However, none of WisDOT's existing forecasting methodologies has been designed specifically for predicting truck movements on a statewide highway network. For this research, the Origin-Destination survey data avaiiable from WisDOT, including two stateline areas, one county, and five cities, are analyzed and the zone-to'||'&'||'not;zone truck trip tables are developed. The resulting Origin-Destination Trip Length Frequency (00 TLF) distributions by trip type are applied to the Gravity Model (GM) for comparison with comparable TLFs from the GM. The gravity model is calibrated to obtain friction factor curves for the three trip types, Internal-Internal (I-I), Internal-External (I-E), and External-External (E-E). ~oth "macro-scale" calibration and "micro-scale" calibration are performed. The comparison of the statewide GM TLF with the 00 TLF for the macro-scale calibration does not provide suitable results because the available 00 survey data do not represent an unbiased sample of statewide truck trips. For the "micro-scale" calibration, "partial" GM trip tables that correspond to the 00 survey trip tables are extracted from the full statewide GM trip table. These "partial" GM trip tables are then merged and a partial GM TLF is created. The GM friction factor curves are adjusted until the partial GM TLF matches the 00 TLF. Three friction factor curves, one for each trip type, resulting from the micro-scale calibration produce a reasonable GM truck trip model. A key methodological issue for GM. calibration involves the use of multiple friction factor curves versus a single friction factor curve for each trip type in order to estimate truck trips with reasonable accuracy. A single friction factor curve for each of the three trip types was found to reproduce the 00 TLFs from the calibration data base. Given the very limited trip generation data available for this research, additional refinement of the gravity model using multiple mction factor curves for each trip type was not warranted. In the traditional urban transportation planning studies, the zonal trip productions and attractions and region-wide OD TLFs are available. However, for this research, the information available for the development .of the GM model is limited to Ground Counts (GC) and a limited set ofOD TLFs. The GM is calibrated using the limited OD data, but the OD data are not adequate to obtain good estimates of truck trip productions and attractions .. Consequently, zonal productions and attractions are estimated using zonal population as a first approximation. Then, Selected Link based (SELINK) analyses are used to adjust the productions and attractions and possibly recalibrate the GM. The SELINK adjustment process involves identifying the origins and destinations of all truck trips that are assigned to a specified "selected link" as the result of a standard traffic assignment. A link adjustment factor is computed as the ratio of the actual volume for the link (ground count) to the total assigned volume. This link adjustment factor is then applied to all of the origin and destination zones of the trips using that "selected link". Selected link based analyses are conducted by using both 16 selected links and 32 selected links. The result of SELINK analysis by u~ing 32 selected links provides the least %RMSE in the screenline volume analysis. In addition, the stability of the GM truck estimating model is preserved by using 32 selected links with three SELINK adjustments, that is, the GM remains calibrated despite substantial changes in the input productions and attractions. The coverage of zones provided by 32 selected links is satisfactory. Increasing the number of repetitions beyond four is not reasonable because the stability of GM model in reproducing the OD TLF reaches its limits. The total volume of truck traffic captured by 32 selected links is 107% of total trip productions. But more importantly, ~ELINK adjustment factors for all of the zones can be computed. Evaluation of the travel demand model resulting from the SELINK adjustments is conducted by using screenline volume analysis, functional class and route specific volume analysis, area specific volume analysis, production and attraction analysis, and Vehicle Miles of Travel (VMT) analysis. Screenline volume analysis by using four screenlines with 28 check points are used for evaluation of the adequacy of the overall model. The total trucks crossing the screenlines are compared to the ground count totals. L V/GC ratios of 0.958 by using 32 selected links and 1.001 by using 16 selected links are obtained. The %RM:SE for the four screenlines is inversely proportional to the average ground count totals by screenline .. The magnitude of %RM:SE for the four screenlines resulting from the fourth and last GM run by using 32 and 16 selected links is 22% and 31 % respectively. These results are similar to the overall %RMSE achieved for the 32 and 16 selected links themselves of 19% and 33% respectively. This implies that the SELINICanalysis results are reasonable for all sections of the state.Functional class and route specific volume analysis is possible by using the available 154 classification count check points. The truck traffic crossing the Interstate highways (ISH) with 37 check points, the US highways (USH) with 50 check points, and the State highways (STH) with 67 check points is compared to the actual ground count totals. The magnitude of the overall link volume to ground count ratio by route does not provide any specific pattern of over or underestimate. However, the %R11SE for the ISH shows the least value while that for the STH shows the largest value. This pattern is consistent with the screenline analysis and the overall relationship between %RMSE and ground count volume groups. Area specific volume analysis provides another broad statewide measure of the performance of the overall model. The truck traffic in the North area with 26 check points, the West area with 36 check points, the East area with 29 check points, and the South area with 64 check points are compared to the actual ground count totals. The four areas show similar results. No specific patterns in the L V/GC ratio by area are found. In addition, the %RMSE is computed for each of the four areas. The %RMSEs for the North, West, East, and South areas are 92%, 49%, 27%, and 35% respectively, whereas, the average ground counts are 481, 1383, 1532, and 3154 respectively. As for the screenline and volume range analyses, the %RMSE is inversely related to average link volume. 'The SELINK adjustments of productions and attractions resulted in a very substantial reduction in the total in-state zonal productions and attractions. The initial in-state zonal trip generation model can now be revised with a new trip production's trip rate (total adjusted productions/total population) and a new trip attraction's trip rate. Revised zonal production and attraction adjustment factors can then be developed that only reflect the impact of the SELINK adjustments that cause mcreases or , decreases from the revised zonal estimate of productions and attractions. Analysis of the revised production adjustment factors is conducted by plotting the factors on the state map. The east area of the state including the counties of Brown, Outagamie, Shawano, Wmnebago, Fond du Lac, Marathon shows comparatively large values of the revised adjustment factors. Overall, both small and large values of the revised adjustment factors are scattered around Wisconsin. This suggests that more independent variables beyond just 226; population are needed for the development of the heavy truck trip generation model. More independent variables including zonal employment data (office employees and manufacturing employees) by industry type, zonal private trucks 226; owned and zonal income data which are not available currently should be considered. A plot of frequency distribution of the in-state zones as a function of the revised production and attraction adjustment factors shows the overall " adjustment resulting from the SELINK analysis process. Overall, the revised SELINK adjustments show that the productions for many zones are reduced by, a factor of 0.5 to 0.8 while the productions for ~ relatively few zones are increased by factors from 1.1 to 4 with most of the factors in the 3.0 range. No obvious explanation for the frequency distribution could be found. The revised SELINK adjustments overall appear to be reasonable. The heavy truck VMT analysis is conducted by comparing the 1990 heavy truck VMT that is forecasted by the GM truck forecasting model, 2.975 billions, with the WisDOT computed data. This gives an estimate that is 18.3% less than the WisDOT computation of 3.642 billions of VMT. The WisDOT estimates are based on the sampling the link volumes for USH, 8TH, and CTH. This implies potential error in sampling the average link volume. The WisDOT estimate of heavy truck VMT cannot be tabulated by the three trip types, I-I, I-E ('||'&'||'pound;-I), and E-E. In contrast, the GM forecasting model shows that the proportion ofE-E VMT out of total VMT is 21.24%. In addition, tabulation of heavy truck VMT by route functional class shows that the proportion of truck traffic traversing the freeways and expressways is 76.5%. Only 14.1% of total freeway truck traffic is I-I trips, while 80% of total collector truck traffic is I-I trips. This implies that freeways are traversed mainly by I-E and E-E truck traffic while collectors are used mainly by I-I truck traffic. Other tabulations such as average heavy truck speed by trip type, average travel distance by trip type and the VMT distribution by trip type, route functional class and travel speed are useful information for highway planners to understand the characteristics of statewide heavy truck trip patternS. Heavy truck volumes for the target year 2010 are forecasted by using the GM truck forecasting model. Four scenarios are used. Fo~ better forecasting, ground count- based segment adjustment factors are developed and applied. ISH 90 '||'&'||' 94 and USH 41 are used as example routes. The forecasting results by using the ground count-based segment adjustment factors are satisfactory for long range planning purposes, but additional ground counts would be useful for USH 41. Sensitivity analysis provides estimates of the impacts of the alternative growth rates including information about changes in the trip types using key routes. The network'||'&'||'not;based GMcan easily model scenarios with different rates of growth in rural versus . . urban areas, small versus large cities, and in-state zones versus external stations. cities, and in-state zones versus external stations.

• Journal of Biomedical Engineering Research
• /
• v.28 no.2
• /
• pp.235-243
• /
• 2007

Hepatocellular carcinoma is significant worldwide public health problem with an estimated annually mortality of 1,000,000 people. Radiofrequency (RF) ablation is an interventional technique that in recent years has come to be used for treatment of the hepatocellualr carcinoma, by destructing tumor tissues in high temperatures. Numerous studies have been attempted to prove excellence of RF ablation and to improve its efficiency by various methods. However, the attempts are sometimes paradox to advantages of a minimum invasive characteristic and an operative simplicity in RF ablation. The aim of the current study is, therefore, to suggest an improved RF ablation technique by identifying an optimum RF pattern, which is one of important factors capable of controlling the extent of high temperature region in lossless of the advantages of RF ablation. Three-dimensional finite element (FE) model was developed and validated comparing with the results reported by literature. Four representative Rf patterns (sine, square, exponential, and simulated RF waves), which were corresponding to currents fed during simulated RF ablation, were investigated. Following parameters for each RF pattern were analyzed to identify which is the most optimum in eliminating effectively tumor tissues. 1) maximum temperature, 2) a degree of alteration of maximum temperature in a constant time range (30-40 second), 3) a domain of temperature over $47^{\circ}C$ isothermal temperature (IT), and 4) a domain inducing over 63% cell damage. Here, heat transfer characteristics within the tissues were determined by Bioheat Governing Equation. Developed FE model showed 90-95% accuracy approximately in prediction of maximum temperature and domain of interests achieved during RF ablation. Maximum temperatures for sine, square, exponential, and simulated RF waves were $69.0^{\circ}C,\;66.9^{\circ}C,\;65.4^{\circ}C,\;and\;51.8^{\circ}C$, respectively. While the maximum temperatures were decreased in the constant time range, average time intervals for sine, square, exponential, and simulated RE waves were $0.49{\pm}0.14,\;1.00{\pm}0.00,\;1.65{\pm}0.02,\;and\;1.66{\pm}0.02$ seconds, respectively. Average magnitudes of the decreased maximum temperatures in the time range were $0.45{\pm}0.15^{\circ}C$ for sine wave, $1.93{\pm}0.02^{\circ}C$ for square wave, $2.94{\pm}0.05^{\circ}C$ for exponential wave, and $1.53{\pm}0.06^{\circ}C$ for simulated RF wave. Volumes of temperature domain over $47^{\circ}C$ IT for sine, square, exponential, and simulated RF waves were 1480mm3, 1440mm3, 1380mm3, and 395mm3, respectively. Volumes inducing over 63% cell damage for sine, square, exponential, and simulated RF waves were 114mm3, 62mm3, 17mm3, and 0mm3, respectively. These results support that applying sine wave during RF ablation may be generally the most optimum in destructing effectively tumor tissues, compared with other RF patterns.

• Journal of Intelligence and Information Systems
• /
• v.24 no.1
• /
• pp.253-266
• /
• 2018

This paper proposes a methodology applying sequence tagging methodology to improve the performance of NER(Named Entity Recognition) used in QA system. In order to retrieve the correct answers stored in the database, it is necessary to switch the user's query into a language of the database such as SQL(Structured Query Language). Then, the computer can recognize the language of the user. This is the process of identifying the class or data name contained in the database. The method of retrieving the words contained in the query in the existing database and recognizing the object does not identify the homophone and the word phrases because it does not consider the context of the user's query. If there are multiple search results, all of them are returned as a result, so there can be many interpretations on the query and the time complexity for the calculation becomes large. To overcome these, this study aims to solve this problem by reflecting the contextual meaning of the query using Bidirectional LSTM-CRF. Also we tried to solve the disadvantages of the neural network model which can't identify the untrained words by using ontology knowledge based feature. Experiments were conducted on the ontology knowledge base of music domain and the performance was evaluated. In order to accurately evaluate the performance of the L-Bidirectional LSTM-CRF proposed in this study, we experimented with converting the words included in the learned query into untrained words in order to test whether the words were included in the database but correctly identified the untrained words. As a result, it was possible to recognize objects considering the context and can recognize the untrained words without re-training the L-Bidirectional LSTM-CRF mode, and it is confirmed that the performance of the object recognition as a whole is improved.

• Asia pacific journal of information systems
• /
• v.19 no.3
• /
• pp.99-124
• /
• 2009

Many firms in Korea have adopted and used advanced information technology in an effort to boost efficiency. The process of adapting to the new technology, at the same time, can vary from one firm to another. As such, this research focuses on several relevant factors, especially the roles of social interaction as a key variable that influences the technology adaptation process and the outcomes. Thus far, how a firm goes through the adaptation process to the new technology has not been yet fully explored. Previous studies on changes undergone by a firm or an organization due to information technology have been pursued from various theoretical points of views, evolved from technological and institutional views to an integrated social technology views. The technology adaptation process has been understood to be something that evolves over time and has been regarded as cycles between misalignments and alignments, gradually approaching the stable aligned state. The adaptation process of the new technology was defined as "appropriation" process according to Poole and DeSanctis (1994). They suggested that this process is not automatically determined by the technology design itself. Rather, people actively select how technology structures should be used; accordingly, adoption practices vary. But concepts of the appropriation process in these studies are not accurate while suggested propositions are not clear enough to apply in practice. Furthermore, these studies do not substantially suggest which factors are changed during the appropriation process and what should be done to bring about effective outcomes. Therefore, research objectives of this study lie in finding causes for the difference in ways in which advanced information technology has been used and adopted among organizations. The study also aims to explore how a firm's interaction with social as well as technological factors affects differently in resulting organizational changes. Detail objectives of this study are as follows. First, this paper primarily focuses on the appropriation process of advanced information technology in the long run, and we look into reasons for the diverse types of the usage. Second, this study is to categorize each phases in the appropriation process and make clear what changes occur and how they are evolved during each phase. Third, this study is to suggest the guidelines to determine which strategies are needed in an individual, group and organizational level. For this, a substantially grounded theory that can be applied to organizational practice has been developed from a longitudinal comparative case study. For these objectives, the technology appropriation process was explored based on Structuration Theory by Giddens (1984), Orlikoski and Robey (1991) and Adaptive Structuration Theory by Poole and DeSanctis (1994), which are examples of social technology views on organizational change by technology. Data have been obtained from interviews, observations of medical treatment task, and questionnaires administered to group members who use the technology. Data coding was executed in three steps following the grounded theory approach. First of all, concepts and categories were developed from interviews and observation data in open coding. Next, in axial coding, we related categories to subcategorize along the lines of their properties and dimensions through the paradigm model. Finally, the grounded theory about the appropriation process was developed through the conditional/consequential matrix in selective coding. In this study eight hypotheses about the adaptation process have been clearly articulated. Also, we found that the appropriation process involves through three phases, namely, "direct appropriation," "cooperate with related structures," and "interpret and make judgments." The higher phases of appropriation move, the more users represent various types of instrumental use and attitude. Moreover, the previous structures like "knowledge and experience," "belief that other members know and accept the use of technology," "horizontal communication," and "embodiment of opinion collection process" are evolved to higher degrees in their dimensions of property. Furthermore, users continuously create new spirits and structures, while removing some of the previous ones at the same time. Thus, from longitudinal view, faithful and unfaithful appropriation methods appear recursively, but gradually faithful appropriation takes over the other. In other words, the concept of spirits and structures has been changed in the adaptation process over time for the purpose of alignment between the task and other structures. These findings call for a revised or extended model of structural adaptation in IS (Information Systems) literature now that the vague adaptation process in previous studies has been clarified through the in-depth qualitative study, identifying each phrase with accuracy. In addition, based on these results some guidelines can be set up to help determine which strategies are needed in an individual, group, and organizational level for the purpose of effective technology appropriation. In practice, managers can focus on the changes of spirits and elevation of the structural dimension to achieve effective technology use.