• Smart Structures and Systems
• /
• v.13 no.5
• /
• pp.821-848
• /
• 2014

This paper presents a novel method to carry out monitoring of transport infrastructure such as pavements and bridges through the analysis of vehicle accelerations. An algorithm is developed for the identification of dynamic vehicle-bridge interaction forces using the vehicle response. Moving force identification theory is applied to a vehicle model in order to identify these dynamic forces between the vehicle and the road and/or bridge. A coupled half-car vehicle-bridge interaction model is used in theoretical simulations to test the effectiveness of the approach in identifying the forces. The potential of the method to identify the global bending stiffness of the bridge and to predict the pavement roughness is presented. The method is tested for a range of bridge spans using theoretical simulations and the influences of road roughness and signal noise on the accuracy of the results are investigated.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.45
• /
• pp.365-374
• /
• 1998

Control Chart is a powerful tool to detect that process is in control or out of control. CIM can have real effect when CIM involve automated quality control. A neural network approach is used for unnatural pattern detecting of control chart. The previous moving window method uses all unnatural pattern that is detected as moving time window. Therefore, It trains a large number of unnatural pattern and takes training time long. In this paper, the proposed method tests a small number of training unnatural pattern which modifies test data without repeating time. We shows that the proposed method has differences In training time and identification rate on the previous moving windows method. As results, we reduced training time and obtain the same identification rate.

• 대한상한금궤의학회지
• /
• v.13 no.1
• /
• pp.111-119
• /
• 2021

Objectives: This case study aimed to report the effect of Sihogyejigungang-tang (SGGT) on headache with dyspepsia based on the disease pattern identification diagnostic system (DPIDS) based on the Shanghanlun provisions. Methods: According to the DPIDS based on the Shanghanlun provisions, the patient was diagnosed with Greater Yang Disease Chest Bind and treated with SGGT. The results of treatment were evaluated by a numerical rating scale (NRS), the Korean Headache Impact Test (KHIT-6), and change in clinical symptoms. Results: After administering SGGT for 160 days, the NRS improved from 9 to 1 and the KHIT-6 improved from 70 to 44. No serious treatment-related adverse events were reported. Conclusions: This study shows the effective treatment of headache with dyspepsia using SGGT based on the DPIDS based on the Shanghanlun provisions.

• Structural Engineering and Mechanics
• /
• v.65 no.5
• /
• pp.547-556
• /
• 2018

Based on the shaking table tests of a 1:3.52 scale one-bay and one-story ancient wooden structure, a simplified structural mechanics model was established, and the structural state equation and observation equation were deduced. Under the action of seismic waves, the damage rule of initial stiffness and yield stiffness of the joint was obtained. The force hammer percussion test and finite element calculations were carried out, and the structural response was obtained. Considering the 5% noise disturbance in the laboratory environment, the stiffness parameters of the mortise-tenon joint were identified by the partial least squares of singular value decomposition (PLS-SVD) and the Extended Kalman filter (EKF) method. The results show that dynamic and static cohesion method, PLS-SVD, and EKF method can be used to identify the damage degree of structures, and the stiffness of the mortise-tenon joints under strong earthquakes is reduced step by step. Using the proposed model, the identified error of the initial stiffness is about 0.58%-1.28%, and the error of the yield stiffness is about 0.44%-1.21%. This method has high accuracy and good applicability for identifying the initial stiffness and yield stiffness of the joints. The identification method and research results can provide a reference for monitoring and evaluating actual engineering structures.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.6
• /
• pp.2807-2814
• /
• 2011

This paper proposes an identification algorithm that detects detrimental digital video contents based on the color space features. In this paper, discrimination algorithm based on a 2-Dimensional Projection Maps is suggested to find targeted video images. First, 2-Dimensional Projection Maps which is extracting the color characteristics of the video images is applied to extract effectively detrimental candidate frames from the videos, and next estimates similarity between the extracted frames and normative images using the suggested algorithm. Then the detrimental candidate frames are selected from the result of similarity evaluation test which uses critical value. In our experimental test, it is suggested that the results of the comparison between the Color Histogram and the 2-Dimensional Projection Maps technique to detect detrimental candidate frames. Through the various experimental data to test the suggested method and the similarity algorithm, detecting method based on the 2-Dimensional Projection Maps show more superior performance than using the Color Histogram technique in calculation speed and identification abilities searching target video images.

• The Korea Journal of Herbology
• /
• v.36 no.4
• /
• pp.41-50
• /
• 2021

Objectives : This study is to check the quality of Moschus products in Korean markets using a chromatographic analysis. Methods : We collected musk products, two genuine products from Russia (A, B), two authentic products from Hong Kong (C) and Korea (D), the Ministry of Food and Drug Safety (MFDS) standard (E), and two fire ants products (E, F). Results : For identification, TLC analysis of 60% ethanol extracts of each product showed that A, B, C, and E have the suitable patterns before color development at 365 nm UV light for the MFDS regulation in Korea. A clear red spot was observed from the E at R_f 0.6 with 365 nm UV light after color development, but this spot was not found in A and B. For the purity test, a distinct violet spot with R_f 0.87 was observed from the A and B in TLC analysis of methanol extracts of each product at white light, however, this spot was not matched with the impurities of E and F. In HPLC-UV pattern analysis, a similar peak pattern was shown in A, B and E, and similar peaks were observed C, although the similarity was weaker than that of A, B, and E. The F and G showed different peak patterns compared with the peak patterns of other samples. Conclusions : Hence, it is considered that the test methods need flexibility in application for identification and purity test depending on the type of sample.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.6
• /
• pp.470-477
• /
• 2015

This paper presents a new technique for generating an optimum synchronizable test sequence that can be applied in the distributed test architecture where both external synchronization and input/output operation costs are taken into consideration. The method defines a set of phases that constructs a tester-related digraph from a given finite state machine representation of a protocol specification such that a minimum cost tour of the digraph with intrinsically synchronizable transfer sequences can be used to generate an optimum synchronizable test sequence using synchronizable state identification sequences as the state recognition sequence for each state of the given finite state machine. This hybrid approach with a heuristic and optimization technique provides a simple and elegant solution to the synchronization problem that arises during the application of a predetermined test sequence in some protocol test architectures that utilize remote testers.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.6
• /
• pp.539-545
• /
• 2016

UPS system in the liquefied natural gas(LNG) receiving terminal is one of the fundamental equipment that need to sustain operation during earthquake. In this study, modal identification test of UPS system was performed based on IEEE Std. 693-2005 and natural frequencies and modal damping, mode shapes had been identified. In addition, tri-axial time history test was performed to check the behavior and stress of the equipment during earthquake. Eigenvalue analysis was performed and analysis model was modified by reflecting the results of the test. Static analysis by dead weight and response spectrum analysis were performed to compare the combined stresses with the stress results of test. Dynamic characteristics and combined stresses under seismic load condition of the improved analysis model were similar to the test results and in this regard the compatibility was proved.

• Journal of the Korean Society of Safety
• /
• v.23 no.3
• /
• pp.71-78
• /
• 2008

This study aims to identity the age group where driving performance significantly decreases based on the data collected from the Korea Transportation Safety Authority's driver aptitude tests in 2006. The test includes following six driving simulator-based tests: estimation of moving objects' speed, estimation of stopping distance, three tests for drivers' multi-task ability, and kinetic depth perception. These six test results were utilized for the identification of the age threshold applying the CART technique, suggesting driving ability significantly be decreased over 50s. This finding was confirmed by two analyses using the accident history data containing the information of accident and non-accident drivers and the degree of accident severity. The results of this study imply that accident prevention efforts should be enhanced over a wider range of age group than the current practice where the age of 65 is generally applied for the threshold dividing senior and non-senior driver groups.

• Korean journal of applied entomology
• /
• v.18 no.1 s.38
• /
• pp.11-14
• /
• 1979

Spinaches showing dark green mosaic symptoms were used for identification of broad bean wilt virus. In host reaction test, that virus caused local lesions on the inoculated leaves and mosaic symptoms on upper leaves of Chenopodium amaranticolor, Chenopodium quinoa and Vicia faba, and developed mosaic symptoms on Physalis floridana, Spinacia oleracea, Nicotiana tabacum, (White burley, Bright yellow) Nicotiana glutinusa. In agar gel-diffusion test, the virus showed positive reaction with broad bean wilt virus antiserum. Spherical virus particles with size of 25nm in diameter were observed in electron microscope.