• 한국IT서비스학회지
• /
• 제16권2호
• /
• pp.97-110
• /
• 2017

Due to development of IT, various Internet services via the non-face-to-face are increasing rapidly. In the past, the resident registration numbers (RRN) was used a mean of personal identification, but the use of RRN is prohibited by the relevant laws, and the personal identification services using alternative means are activated. According to the prohibition policy of RRN, i-PIN service appeared as an alternative means to identify a person. However, the user's knowledge-based i-PIN service continues to cause fraudulent issuance, account hijacking, and fraud attempts due to hacking accidents. Due to these problems, the usage rate of i-PIN service which performs a nationwide free personal identification service, is rapidly decreasing. Therefore, this paper proposes a technical safety enhancement method for security enhancement in the i-PIN-based personal identification service. In order to strengthen the security of i-PIN, this paper analyzes the encryption key exposure, key exchange and i-PIN authentication model problems of i-PIN and suggests countermeasures. Through the proposed paper, the i-PIN can be expected to be used more effectively as a substitution of RRN by suggesting measures to enhance the safety of personal identification information. Secured personal identification services will enable safer online non-face-to-face transactions. By securing the technical, institutional, and administrative safety of the i-PIN service, the usage rate will gradually increase.

• 융합정보논문지
• /
• 제8권5호
• /
• pp.85-93
• /
• 2018

본 연구는 우리나라에서 운영되고 있는 본인확인수단의 다양성을 확보하기 위해 비대면 본인인증수단 중에서 블록 체인과 FIDO를 선택하여 본인확인수단으로서의 적합성 정도를 검토하였다. 이를 위해 7가지 적합성 기준(보편성, 지속성, 유일성, 편의성, 보안성, 적용성, 경제성)을 선정하여 분석하였는데, 모두 적합한 수준을 갖추고 있음을 검증하였다. 이에 따라 블록체인과 FIDO를 본인확인수단으로 적용하기 위해서는 관련 규정 및 고시의 개정으로 본인확인절차를 개선하여야 한다. 더욱이, 기존의 본인확인수단뿐만 아니라 다양한 본인인증수단을 적용할 수 있도록 서비스분야별로 차별화된 인증기준이 마련되어야 하고, 지속적으로 인증수단을 개발하여 서비스와 연계하여야 한다. 앞으로 본인확인수단은 사물인터넷시대에서 정보유통환경의 안전성을 가져올 것이므로, 본인확인수단의 적용 확대 및 자율적 도입을 지원하여 다양한 서비스에서 구현될 수 있어야 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.9-11
• /
• 2005

We propose a optimal identification of information granulation(IG)-based fuzzy model to carry out the model identification of complex and nonlinear systems. To optimally identity we use genetic algorithm (GAs) sand Hard C-Means (HCM) clustering. An initial structure of fuzzy model is identified by determining the number of input, the selected input variables, the number of membership function, and the conclusion inference type by means of GAs. Granulation of information data with the aid of Hard C-Means(HCM) clustering algorithm help determine the initial parameters of fuzzy model such as the initial apexes of the membership functions and the initial values of polynomial functions being used in the premise and consequence part of the fuzzy rules. And the initial parameters are tuned effectively with the aid of the genetic algorithms(GAs) and the least square method. Numerical example is included to evaluate the performance of the proposed model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.146-148
• /
• 2005

In this paper, we propose a genetically optimized identification of information granulation(IG)-based fuzzy model. To optimally design the IG-based fuzzy model we exploit a hybrid identification through genetic alrogithms(GAs) and Hard C-Means (HCM) clustering. An initial structure of fuzzy model is identified by determining the number of input, the seleced input variables, the number of membership function, and the conclusion inference type by means of GAs. Granulation of information data with the aid of Hard C-Means(HCM) clustering algorithm help determine the initial paramters of fuzzy model such as the initial apexes of the membership functions and the initial values of polyminial functions being used in the premise and consequence part of the fuzzy rules. And the inital parameters are tuned effectively with the aid of the genetic algorithms and the least square method. And also, we exploite consecutive identification of fuzzy model in case of identification of structure and parameters. Numerical example is included to evaluate the performance of the proposed model.

• 전자공학회논문지B
• /
• 제31B권6호
• /
• pp.43-52
• /
• 1994

A design method of rule-based fuzzy modeling is presented for the model identification of complex and nonlinear systems. The proposed rule-based fuzzy modeling implements system structure and parameter identification in the efficient form of ``IF....,THEN...', using the theories of optimization theory , linguistic fuzzy implication rules and fuzzy c-means clustering. Three kinds of method for fuzzy modeling presented in this paper include simplified inference (type I), linear inference (type 2), and modified linear inference (type 3). In order to identify premise structure and parameter of fuzzy implication rules, fuzzy c- means clustering and modified complex method are used respectively and the least sequare method is utilized for the identification of optimum consequence parameters. Time series data for gas furance and those for sewage treatment process are used to evaluate the performance of the proposed rule-based fuzzy modeling. Comparison shows that the proposed method can produce the fuzzy model with higher accuracy than previous other studies.

• Journal of Electrical Engineering and Technology
• /
• 제11권6호
• /
• pp.1872-1879
• /
• 2016

The techniques to recycle and reuse plastics attract public attention. These public attraction and needs result in improving the recycling technique. However, the identification technique for black plastic wastes still have big problem that the spectrum extracted from near infrared radiation spectroscopy is not clear and is contaminated by noise. To overcome this problem, we apply Raman spectroscopy to extract a clear spectrum of plastic material. In addition, to improve the classification ability of fuzzy Radial Basis Function Neural Networks, we apply supervised learning based clustering method instead of unsupervised clustering method. The conditional fuzzy C-Means clustering method, which is a kind of supervised learning based clustering algorithms, is used to determine the location of radial basis functions. The conditional fuzzy C-Means clustering analyzes the data distribution over input space under the supervision of auxiliary information. The auxiliary information is defined by using k Nearest Neighbor approach.

• Structural Engineering and Mechanics
• /
• 제39권6호
• /
• pp.751-765
• /
• 2011

The present paper deals with the identification of a concentrated damage in an elastic parabolic arch through the minimization of an objective function which measures the differences between numerical and experimental values of static displacements. The damage consists in a notch that reduces the height of the cross section at a given abscissa and therefore causes a variation in the flexural stiffness of the structure. The analytical values of static displacements due to applied loads are calculated by means of the principle of virtual work for both the undamaged and damaged arch. First, pseudo-experimental data are used to study the inverse problem and investigate whether a unique solution can occur or not. Various damage intensities are considered to assess the reliability of the identification procedure. Then, the identification procedure is applied to an experimental case, where displacements are measured on a prototype arch. The identified values of damage parameters, i.e., location and intensity, are compared to those obtained by means of a dynamic identification technique performed on the same structure.

• 한국산업정보학회논문지
• /
• 제19권5호
• /
• pp.33-37
• /
• 2014

다양한 개인 정보의 활용으로 신뢰할 수 있는 인증 수단이 요구되고 있다. 개인 얼굴의 특징을 이용하는 얼굴 인증 기술은 특징점 추출이 용이하여 많이 활용되고 있다. 본 논문에서는 무인 접수를 위한 얼굴인증 로봇을 구현하였다. 구현된 로봇은 사용자 인증을 위해 얼굴인식방법을 이용한여 개인 인증을 하고 있다. 얼굴인증 시스템을 무인접수로봇에 적용하여 유용함을 보였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 D
• /
• pp.2885-2887
• /
• 2005

We introduce a hybrid identification of information granulation(IG)-based fuzzy model to carry out the model identification of complex and nonlinear systems. To optimally design the IG-based fuzzy model we exploit a hybrid identification through genetic alrogithms(GAs) and Hard C-Means (HCM) clustering. An initial structure of fuzzy model is identified by determining the number of input, the seleced input variables, the number of membership function, and the conclusion inference type by means of GAs. Granulation of information data with the aid of HCM clustering help determine the initial paramters of fuzzy model such as the initial apexes of the membership functions and the initial values of polyminial functions being used in the premise and consequence part of the fuzzy rules. And the inital parameters are tuned effectively with the aid of the GAs and the least square method. Numerical example is included to evaluate the performance of the proposed model.

• 한국지능시스템학회논문지
• /
• 제2권3호
• /
• pp.40-49
• /
• 1992

In this paper, an approach to identify fuzzy rules is proposed. The decision of the optimal number of fuzzy rule is made by means of fuzzy c-means clustering. The identification of the parameters of fuzzy implications is carried out by use of genetic algorithms. For the efficinet and fast parameter identification, the reduction thechnique of search areas of genetica algorithms is proposed. The feasibility of the proposed approach is evaluated through the identification of the fuzzy model to describe an input-output relation of Gas Furnace. Despite the simplicity of the propsed apprach the accuracy of the identified fuzzy model of gas furnace is superior as compared with that of other fuzzy modles.