• 대한지리학회지
• /
• 제45권5호
• /
• pp.609-627
• /
• 2010

입지는 모든 산업에 있어서 성공의 핵심적인 결정요소이기 때문에 잘못 선정된 입지는 아무리 유능한 운영자라 할지라도 많은 어려움을 겪기 마련이다. 이에 본 연구는 보다 합리적이고 간편한 소매점의 입지 선정 모델을 만들고자 서울시 소재 대형마트를 대상으로 허프의 확률이론을 적용하여 점포별 점유인구를 산출하였다. 점유인구를 바탕으로 모든 단위 구역을 상점간 경쟁 상대를 나타내는 4개의 시장유형, 즉 독점시장, 과점시장, 경쟁시장 비경쟁시장으로 구분하였다. 신규점포가 입지에 가장 합리적인 장소는 점유인구를 가장 많이 확보할 수 있는 지점으로, 비경쟁시장을 최대한 확보할 수 있으면서, 경쟁시장에서 멀리 떨어진 곳이다.

• 대한치과보철학회지
• /
• 제55권1호
• /
• pp.71-78
• /
• 2017

임플란트 보철물을 지대주 및 임플란트에 연결하는 방법은 크게 나사 유지방식과 시멘트 유지방식으로 나눌 수 있다. 나사 유지형의 장점은 탈착 가능성과 잔류 시멘트가 남지 않는다는 점이나 상대적으로 나사 풀림이나 파절의 비율이 시멘트 유지방식에 비해 높다는 단점이 있다. 반면 시멘트 유지형은 심미적이고 상대적으로 적은 비용으로 보철물을 제작할 수 있으나 탈착의 용이성이 불리하다는 단점이 있다. 이 두 가지의 장점을 조합한 방식으로 SCRP방식이 소개되었다. 그러나 역시 이상적인 임플란트 식립 위치를 전제로 한다. 이러한 여러 가지 보철 방식의 단점들을 해결하기 위하여 잔여 시멘트를 남기지 않으면서 연조직 염증을 예방할 수 있는 fiber post 유지형 보철 연결방식을 새롭게 소개하고자 한다.

• 대한가정학회지
• /
• 제43권11호
• /
• pp.73-95
• /
• 2005

The purpose of this research was to reduce the burden of household management and the difficulty of rearing children, which are two most important obstacles for a dual-income family. For this, we suggested a cohousing project, as an alternative concept to conventional housing, where people can socially interact with each other and share mutual cooperation for a better quality of life. We surveyed the lifestyle of dual-income families in Korea, how they understood the cohousing project and their opinions on it. We carried out a survey with the wives from dual income families who were living in the metropolitan areas including Seoul. We contacted 30 wives for the survey to determine the reality of the double income couple family and interviewed them to make a detailed plan for cohousing based on their understanding and needs. In the results, many women who responded to the interview agreed that cohousing was an ideal housing arrangement for the dual-income family. However, they were anxious that it would take too much time and effort to develop their own housing estate by themselves. Therefore, we looked for a way to save time, efforts and cost in developing a cohousing project and came up with the remodeling as a solution.

• Journal of Communications and Networks
• /
• 제15권4호
• /
• pp.383-397
• /
• 2013

In this paper, the sensitivity of massive antenna arrays and digital beamforming to radio frequency (RF) chain in-phase quadrature-phase (I/Q) imbalance is studied and analyzed. The analysis shows that massive antenna arrays are increasingly sensitive to such RF chain imperfections, corrupting heavily the radiation pattern and beamforming capabilities. Motivated by this, novel RF-aware digital beamforming methods are then developed for automatically suppressing the unwanted effects of the RF I/Q imbalance without separate calibration loops in all individual receiver branches. More specifically, the paper covers closed-form analysis for signal processing properties as well as the associated radiation and beamforming properties of massive antenna arrays under both systematic and random RF I/Q imbalances. All analysis and derivations in this paper assume ideal signals to be circular. The well-known minimum variance distortionless response (MVDR) beamformer and a widely-linear (WL) extension of it, called WL-MVDR, are analyzed in detail from the RF imperfection perspective, in terms of interference attenuation and beamsteering. The optimum RF-aware WL-MVDR beamforming solution is formulated and shown to efficiently suppress the RF imperfections. Based on the obtained results, the developed solutions and in particular the RF-aware WL-MVDR method can provide efficient beamsteering and interference suppressing characteristics, despite of the imperfections in the RF circuits. This is seen critical especially in the massive antenna array context where the cost-efficiency of individual RF chains is emphasized.

• 대한생식의학회:학술대회논문집
• /
• 대한불임학회 2003년도 제45차 추계학술대회
• /
• pp.21-30
• /
• 2003

As a result of the technological advance provided by intracytoplasmic sperm injection (ICSI) in 1992, the evaluation and treatment of the infertile male has changed significantly. Many men who were previously thought to be irreversibly infertile have the potential to initiate their own biologic pregnancy. However, not all men having impaired semen parameter are ideal candidates for ICSI for numerous reasons including a lack of addressing the underlying problem causing the male infertility, unknown genetic consequences, and cost-effectiveness issues. In this era of ICSI, the fundamental approach to the male with suspected subfertility is unchanged and is based on a history, physical examination, and focused laboratory testing. The urologist should approach the patient with an intent to identify remediable causes of subfertility given the specific clinical situation. For instance, should a gentleman have his varicocele repaired or vasectomy reversed, or should he proceed directly with ICSI? If no factors can be improved in a timely manner, then ICSI should be considered using the available sperm. Examples of recent advances include the diagnosis and treatment of ejaculatory duct obstruction, indications and techniques for performing testis biopsy, and technique for sperm harvesting. In addition, potential genetic causes of male subfertility should be diagnosed and discussed with the patient. Cystic fibrosis gene mutation, karyotype abnormallities, and Y-chromosome microdeletions all have recently been identified as causative for male infertility in otherwise phenotypically normal men. With recently evolved diagnostic and therapeutic techniques now available for the infertile couple, even the most severe male factor problems in patients previously considered irreversibly infertile are now potentially treatable. The physician should be aware of the availability and limitations of these new and exciting reproductive technologies because they will allow him to provide timely and more effective therapy for the infertile couple. An understanding of these advances by all physicians is important as we progress into the $21^{st}$ century

• 한국해양공학회지
• /
• 제19권5호
• /
• pp.16-25
• /
• 2005

The effect of vertical riser support system on the dynamic behaviour of a classical spar platform is investigated. Spar platform generally uses buoyancy-can riser support system, but as water depth gets deeper the alternative riser support system is required due to safety and cost issues. The alternative riser support system is to hang risers off the spar platform using pneumatic cylinders rather than the buoyancy-can. The existing numerical model for hull/mooring/riser coupled dynamics analysis treats riser as an elastic rod truncated at the keel (truncated riser model), thus, in this model, the effect of riser support system can not be modeled correctly. Due to this reason, the truncated riser model tends to overestimate the spar pitch and heave motion. To evaluate more realistic global spar motion, mechanical coupling among risers, guide frames and support cylinders inside of spar moon-pool should be modeled. In the newly developed model, the risers are extended through the moon-pool by using nonlinear finite element methods with realistic boundary condition at multiple guide frames. In the simulation, the vertical tension from pneumatic cylinders is modeled by using ideal-gas equation and the vertical tension from buoyancy-cans is modeled as constant top tension. The different dynamic characteristics between buoyancy-can riser support system and pneumatic riser support system are extensively studied. The alternative riser support system tends to increase spar heave motion and needs damper system to reduce the spar heave motion.

• 한국식품위생안전성학회지
• /
• 제33권2호
• /
• pp.146-150
• /
• 2018

고추는 한국에서 매우 중요한 양념 중 하나이다. 하지만 수입 고춧가루와 다진 양념(다대기)에 부과되는 관세율(45%/270%)의 차이로 인해, 다진 양념이 수입된 후, 건조 및 분쇄 과정을 거쳐 고춧가루로 제작되고 있는 실정이다. 본 연구에서는 종 특이 PCR 기술과 whole-genome amplification 방법을 접목하여 고춧가루(N=45) 및 다진 양념(N=5) 제품의 사용원료(고추, 마늘, 양파, 파, 생강)를 분석하였다. 모니터링 결과, 39개 고춧가루 제품은 표시사항을 준수하였으며, 6개 고춧가루 및 5개 다진 양념 제품은 제조 기준을 충족시키지 못했다. 따라서 분석 제품의 22%가 표시사항을 준수하지 못한 것으로 밝혀졌으며, 본 연구에 사용한 분석 방법은 고춧가루 제품에 사용된 원료분석에 적합한 방법임을 입증하였다.

• 한국건설안전학회 논문집
• /
• 제2권1호
• /
• pp.21-27
• /
• 2019

현재 건축물의 높이가 높아지고 우리나라 가구 형태가 개인 주택에서 아파트로 변화함에 따라 타워크레인의 사용 횟수는 계속해서 증가하고 있다. 그러나 이처럼 증가하는 타워크레인 사용 횟수에 반해 우리나라 타워크레인 관련 정책은 매우 미비한 실정이다. 특히 타워크레인과 관련된 사고의 원인 중 가장 큰 비중을 차지하는 타워크레인 연식에 대한 기준은 그 설정 근거가 부족하다. 따라서 본 연구에서는 이와 같은 문제점에 주목하여 타워크레인의 보다 신뢰성 있는 타워크레인의 연식을 설정하는 연구를 진행한다. 이를 위해 본 연구에서는 기존 연구에서 사용했던 사례와 영국 타워크레인 기준을 바탕으로 사용 연식을 설정한다.

• Smart Structures and Systems
• /
• 제29권5호
• /
• pp.661-675
• /
• 2022

In this paper, an electric vehicle drives with efficient control and low cost hardware using four quadrant DC converter with Permanent Magnet Direct Current (PMDC) motor fed by DC boost converter is presented. The main idea of this work is to improve the energy efficiency of the conversion chain of an electric vehicle by inserting a boost converter between the battery and the four quadrant-DC motor chopper assembly. Consequently, this method makes it possible to maintain the amplification gain of the 4 quadrant chopper constant regardless of the battery voltage drop and even in the presence of a fault in the battery. One of the most important control problems is control under heavy uncertainty conditions. The higher order sliding mode control technique is introduced for the adjustment of DC bus voltage and mechanical motor speed. To implement the proposed approach in the automotive field, experimental tests were carried out. The performances obtained show the usefulness of this system for a better energy management of an electric vehicle and an ideal control under different operating conditions and constraints, mostly at nominal operation, in the presence of a load torque, when reversing the direction of rotation of the motor speed and even in case of battery chamber failure. The whole system has been tested experimentally and its performance has been analyzed.

• International Journal of Precision Engineering and Manufacturing-Green Technology
• /
• 제9권
• /
• pp.431-441
• /
• 2021

Gadolinium-doped ceria (GDC) is sought-after as an electrolyte layer in solid oxide fuel cells because of its high ionic conductivity and low treatment temperature. Recently, some studies have been reported to produce a component layer of solid oxide fuel cell using a Roll-to-Roll (R2R) system because of its characteristics of the cost-effective and eco-friendly advantages. However, the brittleness and low density of GDC prevent it from being mass-produced via the R2R continuous process. Therefore, we attempted to improve the density of GDC-based multi-electrolyte layers through an optimized R2R calendaring process. The finite element method was employed to determine suitable materials for the calendering rolls and the maximum calendering pressure that would reduce the thickness and porosity of the coated electrolyte layer without producing cracks in the layer. The effect of the number of calendering processes on the thickness and porosity of the electrolyte layers was examined as well. Silicon and steel were observed to be best-suited as the materials for the top and bottom rolls, respectively. Moreover, the maximum permissible calendering pressure was determined to be 15 MPa, while the ideal number of calendering processes was found to be 5. Experimental observations using scanning electron microscopy confirmed that the optimized calendering process reduced the thickness and porosity of the coated electrolyte layers by 16.99% and 7.04%, respectively. Thus, our findings suggest that large-area, high-density GDC-based multi-electrolyte layers with smooth surfaces can be produced via the R2R process, which can enable mass production of SOFCs.