• 대한안전경영과학회지
• /
• 제18권2호
• /
• pp.109-118
• /
• 2016

IPS(Ideal Production System) is a strategic cost management establishing ideal target cost, innovating cost structure and reduction. However, IPS was commonly used in assembly industry acquiring components and using them to assemble vehicles etc. Applying IPS to steel industry is a new try and not easy because cost elements in flow manufacturing are clustered and obfuscated in a complicated way. This paper proposes ICM (Ideal Cost Management) method adaptive to steel industry. One of the biggest advantages is that ICM could classify and categorize costs in detail according to accounts and manufacturing machines. Based on ICM information, steps of extracting and maximizing ideas are followed effectively. From 2013, ICM was applied successfully to POSCO Pohang Steel Works 38 factories.

• 한국도서관정보학회지
• /
• 제32권4호
• /
• pp.419-447
• /
• 2001

이 연구는 Y대 도서관의 전자저널 컨소시엄 중 Academic Press의 2000년분 IDEAL 이용통계를 대상으로 인쇄본 병행구독 전자저널과 단독구독 전자저널의 전문 내려받기 수를 기준으로 그 이용현황을 평가하였으며, 평가결과를 대상으로 비용편익 및 효과를 분석해 보았다. 그 결과 Y대 도서관에서는 전자 저널로만 구독하는 것보다 인쇄본과 전자저널을 동시에 구독하는 병행구독 전자저널의 전문을 더 많이 이용한 것으로 나타났다. 또한 IDEAL의 비용편익을 분석한 결과, 편익은 거의 없는 것으로 나타난 반면에 비용효과는 매우 높은 것으로 분석되었다. 이 연구결과에 따라 전자저널을 구독해서 이용을 활성화할 수 있는 방법으로서 대학도서관들이 전자저널 구독대행사에 임시사용권을 요청하고, 전자저널에 대한 이용자교육, 다양한 이용통계의 분석, 이용자 만족도 조사를 실시할 것을 제언하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.148-151
• /
• 2003

In order to achieve reliable but cost-effective crash simulations of stamped parts, sheet forming process effects were incorporated in simulations using the ideal forming theory mixed with the 3D hybrid membrane/shell method, while the subsequent crash simulations were carried out using a dynamic explicit finite element code. Example solutions performed for forming and crash simulations of I- and S-shaped rails verified that the proposed approach is cost-effective without sacrificing accuracy. The method required a significantly small amount of additional computation time, less than 3% for the specific examples, to incorporate sheet forming effects to crash simulations. As for the constitutive equation, the combined isotropic-kinematic hardening law and the non-quadratic anisotropic yield stress potential as well as its conjugate strain-rate potential were used to describe the anisotropy of AA6114-T4 aluminum alloy sheets.

• Journal of Power Electronics
• /
• 제17권5호
• /
• pp.1308-1316
• /
• 2017

The distributed maximum power point tracking (DMPPT) concept is widely adopted in photovoltaic systems to avoid mismatch loss. However, the high cost and complexity of DMPPT hinder its further promotion in practice. Based on the concept of DMPPT, this paper presents an integrated submodule level half-bridge stack structure along with an optimal current point tracking (OCPT) control algorithm. In this full power processing integrated solution, the number of power switches and passive components is greatly reduced. On the other hand, only one current sensor and its related AD unit are needed to perform the ideal maximum power generation for all of the PV submodules in any irradiance case. The proposal can totally eliminate different small-scaled mismatch effects in real-word condition and the true maximum power point of each PV submodule can be achieved. As a result, the ideal maximum power output of the whole PV system can be achieved. Compared with current solutions, the proposal further develops the integration level of submodule DMPPT solutions with a lower cost and a smaller size. Moreover, the individual MPPT tracking for all of the submodules are guaranteed.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제14권4호
• /
• pp.256-261
• /
• 2014

Solar cells are considered ideal as a clean energy to generate electricity. However, silicon-based photoelectric cells show some shortcomings in efficiency, cost and reliability. This has been a barrier to further commercialization. This paper shows how 40 Inventive Principles can be used in the research and development on the solar cells to improve efficiency, cost and reliability.

• Journal of applied mathematics & informatics
• /
• 제10권1_2호
• /
• pp.131-143
• /
• 2002

In this paper hi-criterion quadratic fractional generalized solid transportation problem is studied. An algorithm is developed to obtain the time-cost trade-off pairs and hence identifies the optimum trade-off pairs giving the equal priority to both time and cost. A numerical example is illustrated to support the algorithm.

• 한국산업융합학회 논문집
• /
• 제19권3호
• /
• pp.109-124
• /
• 2016

The objective of this paper is to find the density, stiffness, and strength of truss-wall diamond corrugation model combined with pinwheel truss inside space. The truss-wall diamond corrugation (TDC) model is defined as a unit cell coming from solid-wall diamond corrugation (SDC) model. Pinwheel truss-wall diamond corrugation (P-TDC) model is made by TDC connected with pinwheel structure inside of the space. Derived ideal solutions of P-TDC is based on truss-wall and pinwheel truss model at first. And then it is compared with Gibson-Ashby's ideal solution. To validate the ideal solutions of the P-TDC, ABAQUS software is used to predict the density, strength, and stiffness, and then each of them are compared to the ideal solution of Gibson-Ashby with a log-log scale. Applied material property is stainless steel 304 because of having cost effectiveness. Applied parameters for P-TDC are 1 thru 5 mm diameter within fixed opening width as 4mm. In conclusion, the relative Young's modulus and relative yield strength of the P-TDC unit model is reasonable matched to the ideal expectations of the Gibson-Ashby's theory. In nearby future, P-TDC model is hoped to be applied to make sandwich core structure by advanced technologies such as 3D printing skills.

• Membrane and Water Treatment
• /
• 제6권6호
• /
• pp.477-488
• /
• 2015

This study demonstrates that low pressure membranes are the ideal choice for industrial and/or municipal wastewater treatment by showing some promising experimental results, understanding different membrane filtration models, studying the potential of membrane bioreactors (MBRs), considering ceramic membranes fabrication and illustrating the role of nanotechnology in membranes. Cost study calculations are included to determine the treatment cost as well as the initial cost of various membrane types. Results showed that integrated membranes are preferred over MBR in case of average capacities. However, higher capacity situations are the most economical choice for MBR. It is shown that the least treatment cost in MBR was about $0.13/m^3$. However, the $0.13/m^3$ is the theoretical cost which is very small compared to the actual average MBR treatment cost of $0.5/m^3$.

• 품질경영학회지
• /
• 제31권4호
• /
• pp.1-18
• /
• 2003

Quality is a critical competitive factor in today's environment because of the impact of quality on costs and delivery. Many companies regard quality as a key concept of company strategy in order to achieve the competitive edge. Measuring and reporting quality cost is the first step in quality management program. The supposition of quality cost model is that investment in prevention activities will bring rewards from reduced failure costs, and that further investment in prevention activities will show profits from reduced appraisal costs. In this study, the degree of quality cost deviation is conceptualized. This means a deviation between the ideal and present ranking in the amounts of quality cost categories. This study analysed that the effect of its deviation on quality management activity and performance variables. However, there are no difference in these variables. The major reason is that most of companies are endeavoring for quality management but operating quality cost system unsystematically. The review against a prevention and appraisal activity is necessary.

• Composites Research
• /
• 제19권5호
• /
• pp.34-39
• /
• 2006

The mechanical properties and durabilities of fiber advanced composites make them ideal for widespread applications in construction worldwide. However, one of the problems of fiber reinforced advanced composites has expensive initial costs. So the efforts for lowering the initial cost have to be needed. There has been hardly assessment results of life cycle cost for fiber reinforced advanced composites in construction field, but some papers showed that total life cycle cost could be profitable, if the initial cost could be reduced. The purpose of this paper is to report assessment results of LCC(Life Cycle Cost) for application of FRP(Fiber Reinforced Plastic) in construction field.