• Korean Journal of Agricultural Science
• /
• v.20 no.1
• /
• pp.68-87
• /
• 1993

Data acquisition system and computer program developed in this study could be well used in engine vibration analysis. The system and program developed were also operated to be able to control measuring interval, number of channels, number of data. The flywheel was specially studied to provide the proper weight with rubber damper for the engine design at low level of vibration. This study was conducted to obtain basic data which affect the engine vibration. The experiment of this study was performed on original weight flywheel, weight-reduced flywheel, weight-reduced and rubber-coated flywheel, weight-reduced and damper-attached flywheel. Avarage of peak value, maximum vibration, power spectrum density based on FFT analysis are major factors of this experiment. Results were obtained as follows : 1. When rubber was inserted in the flywheel rim of which weight was reduced from 32.2kgf to 24.4kgf, maximum vibration of the engine was decreased 48.3% at X axis, 35.5% at Y axis and 34.6% at Z axis in comparison with the flywheel of original weight. 2. When the flywheel of rubber damper was compared with the original flywheel, the average of absolute vibration for rubber damped flywheel was decreased at X, Y, Z axis and especially its decreasing rate was so high at X-axis comparing with the other flywheel, which implied that rubber damper was very useful to reducing the vibration of the engine at X axis. 3. Hysteresis losses of X, Y, Z axis were greatly decreased in the flywheel with rubber damper on rim. 4. Damped oscillation effect on X and Y axis vibration above average peak vibration by the flywheel of rubber damper on rim was larger than those by the other flywheels. 5. Power spectrums of vibration at real and imaginery part were bi-mode type. The vibration frequency of rubber dampered flywheel which weight is decreased was slightly increased as compared with original flywheel.

• Management & Information Systems Review
• /
• v.38 no.4
• /
• pp.137-157
• /
• 2019

Companies are trying to use enterprise SNS for collaboration and speedy decision-making. This study verified the mediating effect of communication between enterprise SNS and job performance, and proved the moderating effect of nationality between enterprise SNS and communication. This study collected survey data of 81 Korean and 81 Chinese from employees who have used enterprise SNS in Korea and China. As results of data analysis, first, enterprise SNS improved job performance through speedy information sharing and error reduction. Second, communication mediated the effect of enterprise SNS on job performance. Third, enterprise SNS increased the level of organizational communication through decreasing the burden of offline face-to-face communication. Compared with Chinese corporate organizations, Korean corporate organizations have high power distances, centralized control, and high superior authority. Therefore, in the off-line communication situation, the subordinate feels the social pressure to follow the command of the superior. Thus communication is one-way and closed. In this Korean organizational situation, corporate SNS can be used as a means to bypass rigid offline communication. In the online communication environment of non face-to-face corporate SNS, anxiety and stress of face-to-face communication can be reduced, so communication between the upper and lower sides can flow more smoothly. The contribution of this paper is that it proved that enterprise SNS promotes communication and improve job performance by reducing the anxiety or stress of offline communication, while according to prior research successful adoption of many types of information systems requires the fit between an organization and its organizational culture.

• Journal of Korean Society of Archives and Records Management
• /
• v.3 no.1
• /
• pp.69-92
• /
• 2003

Registration and description of records are important elements of processing which provide with the background information of production of records and business-related information. They also enable to search and use the records. In this paper, I examined the Korean registration and description system defined in the Public Records Management Act which directs the records creating agency to register records in creating offices and directs the "professional archives" to make "basic registrations" and "detailed registrations" of the records. In the analysis and comparison of two different registration and description systems with the known international standards of records and archives management, such as ISO15489 and ISAD(G), I intended to evaluate the Korean records and archives management system and suggested recommendations for the renovation of the Korean recordskeeping system. Despite we have unique office business procedures and the culture of officialdom, and despite we have developed our system based on the established business procedures and office culture, it would be preferable to adopt or follow the international standards and established best practices. After the comparative analysis, I recommended some innovations in the filed of registration and description. For instance, in the basic registration. we would better to install an item of "simple contents summary." We may also need the multiple-level description. The fonds level description and the series level description should be introduced to our archival automated management system. We need to establish a Korean standard of description adopting the rules of the ISAD(G) and ISAAR(CPF). Essential requirements for electronic records management, such as contextual and structural information, should be incorporated in the new standard. Documentation of records disposition also should be reinforced to guarantee the authenticity of records and to ensure control of the records. To implement the recommendations for the standard, we need to amend the Public Records Management Act and its Regulations and Rules. Also it is imperative to redesign the GARS integrated archival automated management system.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.3
• /
• pp.21-34
• /
• 2015

In this study, a reference model is constructed that provides architects or designers with sufficient information on the intelligent service facility that is essential for U-City space configuration, and for the support of enhanced design, as well as for planning activities. At the core of the reference model is comprehensive information about the intelligent service facility that plans the content of services, and the latest related information that is regularly updated. A plan is presented to take advantage of the database of list information systems in the Public Procurement Service that handles intelligent service facilities. We suggest a number of improvements by analyzing the current status of, and issues with, the goods information in the Public Procurement Service, and by conducting a simulation for the proper placement of CCTV. As the design of U-City plan has evolved from IT technology-based to smart space-based, reviews of limitations such as the lack of standards, information about the installation, and the placement of the intelligent service facility that provides U-service have been carried out. Due to the absence of relevant legislation and guidelines, however, planning activities, such as the appropriate placement of the intelligent service facility are difficult when considering efficient service provision. In addition, with the lack of information about IT technology and intelligent service facilities that can be provided to U-City planners and designers, there are a number of difficulties when establishing an optimal plan with respect to service level and budget. To solve these problems, this study presents a plan in conjunction with the goods information from the Public Procurement Service. The Public Procurement Service has already built an industry-related database of around 260,000 cases, which has been continually updated. It can be a very useful source of information about the intelligent service facility, the ever-changing U-City industry's core, and the relevant technologies. However, since providing this information is insufficient in the application process and, due to the constraints in the information disclosure process, there have been some issues in its application. Therefore, this study, by presenting an improvement plan for the linkage and application of the goods information in the Public Procurement Service, has significance for the provision of the basic framework for future U-City enhancement plans, and multi-departments' common utilization of the goods information in the Public Procurement Service.

• The Journal of Society for e-Business Studies
• /
• v.22 no.2
• /
• pp.137-152
• /
• 2017

The decline in the price of IT devices and the development of the Internet have created a new field called Internet of Things (IoT). IoT, which creates new services by connecting all the objects that are in everyday life to the Internet, is pioneering new forms of business that have not been seen before in combination with Big Data. The prospect of IoT can be said to be unlimited in its utilization. In addition, studies of standardization organizations for smooth connection of these IoT devices are also active. However, there is a part of this study that we overlook. In order to control IoT equipment or acquire information, it is necessary to separately develop interworking issues (IP address, Wi-Fi, Bluetooth, NFC, etc.) and related application software or apps. In order to solve these problems, existing research methods have been conducted on augmented reality using GPS or markers. However, there is a disadvantage in that a separate marker is required and the marker is recognized only in the vicinity. In addition, in the case of a study using a GPS address using a 2D-based camera, it was difficult to implement an active interface because the distance to the target device could not be recognized. In this study, we use 3D Depth recognition camera to be installed on smartphone and calculate the space coordinates automatically by linking the distance measurement and the sensor information of the mobile phone without a separate marker. Coordination inquiry finds equipment of IoT and enables information acquisition and control of corresponding IoT equipment. Therefore, from the user's point of view, it is possible to reduce the burden on the problem of interworking of the IoT equipment and the installation of the app. Furthermore, if this technology is used in the field of public services and smart glasses, it will reduce duplication of investment in software development and increase in public services.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.667-678
• /
• 2002

In this paper, a new radiating structure with a multi-layered two-dimensional metallic disk array was proposed for shaping the flat-topped element pattern. It is an infinite periodic planar array structure with metallic disks finitely stacked above the radiating circular waveguide apertures. The theoretical analysis was in detail performed using rigid full-wave analysis, and was based on modal representations for the fields in the partial regions of the array structure and for the currents on the metallic disks. The final system of linear algebraic equations was derived using the orthogonal property of vector wave functions, mode-matching method, boundary conditions and Galerkin's method, and also their unknown modal coefficients needed for calculation of the array characteristics were determined by Gauss elimination method. The application of the algorithm was demonstrated in an array design for shaping the flat-topped element patterns of $\pm$20$^{\circ}$ beam width in Ka-band. The optimal design parameters normalized by a wavelength for general applications are presented, which are obtained through optimization process on the basis of simulation and design experience. A Ka-band experimental breadboard with symmetric nineteen elements was fabricated to compare simulation results with experimental results. The metallic disks array structure stacked above the radiating circular waveguide apertures was realized using ion-beam deposition method on thin polymer films. It was shown that the calculated and measured element patterns of the breadboard were in very close agreement within the beam scanning range. The result analysis for side lobe and grating lobe was done, and also a blindness phenomenon was discussed, which may cause by multi-layered metallic disk structure at the broadside. Input VSWR of the breadboard was less than 1.14, and its gains measured at 29.0 GHz. 29.5 GHz and 30 GHz were 10.2 dB, 10.0 dB and 10.7 dB, respectively. The experimental and simulation results showed that the proposed multi-layered metallic disk array structure could shape the efficient flat-topped element pattern.

• The Korean Journal of Air & Space Law and Policy
• /
• v.28 no.2
• /
• pp.349-384
• /
• 2013

The Sputnik 1 launching in 1957 made the world recognize the necessity of international regulations on space development and activities in outer space. The United Nations established COPUOS the very next year, and adopted the mandate to examine legal issues concerning the peaceful uses of outer space. At the time, the military sector of the U.S.A. and the Soviet Union were in charge of the space development and they were not welcomed to discuss the prohibition of the military uses of outer space at the legal section in the COPUOS. Although both countries had common interests in securing the freedom of military uses in outer space. As the social and economic benefits derived from space activities have become more apparent, civil expenditures on space activities have continued to increase in several countries. Virtually all new spacefaring states explicitly place a priority on space-based applications to support social and economic development. Such space applications as satellite navigation and Earth imaging are core elements of almost every existing civil space program. Likewise, Moon exploration continues to be a priority for such established spacefaring states as China, Russia, India, and Japan. Recently, Companies that manufacture satellites and ground equipment have also seen significant growth. On 25 February 2012 China successfully launched the eleventh satellite for its indigenous global navigation and positioning satellite system, Beidou. Civil space activities began to grow in China when they were allocated to the China Great Wall Industry Corporation in 1986. China Aerospace Corporation was established in 1993, followed by the development of the China National Space Administration. In Japan civil space was initially coordinated by the National Space Activities Council formed in 1960. Most of the work was performed by the Institute of Space and Aeronautical Science of the University of Tokyo, the National Aerospace Laboratory, and, most importantly, the National Space Development Agency. In 2003 all this work was assumed by the Japanese Aerospace Exploration Agency(JAXA). Japan eases restrictions on military space development. On 20 June 2012 Japan passed the Partial Revision of the Cabinet Establishment Act, which restructured the authority to regulate Japanese space policy and budget, including the governance of the JAXA. Under this legislation, the Space Activities Commission of the Ministry of Education, Culture, Sports, Science, and Technology, which was responsible for the development of Japanese space program, will be abolished. Regulation of space policy and budget will be handed over to the Space Strategy Headquarter formed under the Prime Minister's Cabinet. Space Strategy will be supported by a Consultative Policy Commission as an academics and independent observers. By revoking Article 4 (Objectives of the Agency) of a law that previously governed JAXA and mandated the development of space programs for "peaceful purposes only," the new legislation demonstrates consistency with Article 2 of the 2008 Basic Space Law. In conformity with the principles laid down in the 1967 Outer Space Treaty JAXA is now free to pursue the non-aggressive military use of space. New legislation is the culmination of a decade-long process that sought ways to "leverage Japan's space development programs and technologies for security purposes, to bolster the nation's defenses in the face of increased tensions in East Asia." In this connection it would also be very important and necessary to create an Asian Space Agency(ASA) for strengthening cooperation within the Asian space community towards joint undertakings.

• Journal of Intelligence and Information Systems
• /
• v.16 no.4
• /
• pp.85-97
• /
• 2010

Internet communities are a typical space for knowledge creation and use on the Internet as people discuss their common interests within the internet communities. When we define 'Knowledge Communities' as internet communities that are related to knowledge creation and use, they are categorized into 4 different types such as 'Search Engine,' 'Open Communities,' 'Specialty Communities,' and 'Activity Communities.' Each type of knowledge community does not remain the same, for example. Rather, it changes with time and is also affected by the external business environment. Therefore, it is critical to develop processes for practical use of such changeable knowledge communities. Yet there is little research regarding a strategic framework for knowledge communities as a source of knowledge creation and use. The purposes of this study are (1) to find factors that can affect knowledge creation and use for each type of knowledge community and (2) to develop a strategic framework for practical use of the knowledge communities. Based on previous research, we found 7 factors that have considerable impacts on knowledge creation and use. They were 'Fitness,' 'Reliability,' 'Systemicity,' 'Richness,' 'Similarity,' 'Feedback,' and 'Understanding.' We created 30 different questions from each type of knowledge community. The questions included common sense, IT, business and hobbies, and were uniformly selected from various knowledge communities. Instead of using survey, we used these questions to ask users of the 4 representative web sites such as Google from Search Engine, NAVER Knowledge iN from Open Communities, SLRClub from Specialty Communities, and Wikipedia from Activity Communities. These 4 representative web sites were selected based on popularity (i.e., the 4 most popular sites in Korea). They were also among the 4 most frequently mentioned sitesin previous research. The answers of the 30 knowledge questions were collected and evaluated by the 11 IT experts who have been working for IT companies more than 3 years. When evaluating, the 11 experts used the above 7 knowledge factors as criteria. Using a stepwise linear regression for the evaluation of the 7 knowledge factors, we found that each factors affects differently knowledge creation and use for each type of knowledge community. The results of the stepwise linear regression analysis showed the relationship between 'Understanding' and other knowledge factors. The relationship was different regarding the type of knowledge community. The results indicated that 'Understanding' was significantly related to 'Reliability' at 'Search Engine type', to 'Fitness' at 'Open Community type', to 'Reliability' and 'Similarity' at 'Specialty Community type', and to 'Richness' and 'Similarity' at 'Activity Community type'. A strategic framework was created from the results of this study and such framework can be useful for knowledge communities that are not stable with time. For the success of knowledge community, the results of this study suggest that it is essential to ensure there are factors that can influence knowledge communities. It is also vital to reinforce each factor has its unique influence on related knowledge community. Thus, these changeable knowledge communities should be transformed into an adequate type with proper business strategies and objectives. They also should be progressed into a type that covers varioustypes of knowledge communities. For example, DCInside started from a small specialty community focusing on digital camera hardware and camerawork and then was transformed to an open community focusing on social issues through well-known photo galleries. NAVER started from a typical search engine and now covers an open community and a special community through additional web services such as NAVER knowledge iN, NAVER Cafe, and NAVER Blog. NAVER is currently competing withan activity community such as Wikipedia through the NAVER encyclopedia that provides similar services with NAVER encyclopedia's users as Wikipedia does. Finally, the results of this study provide meaningfully practical guidance for practitioners in that which type of knowledge community is most appropriate to the fluctuated business environment as knowledge community itself evolves with time.

• Journal of Intelligence and Information Systems
• /
• v.16 no.4
• /
• pp.99-112
• /
• 2010

Ensemble learning is a method for improving the performance of classification and prediction algorithms. It is a method for finding a highly accurateclassifier on the training set by constructing and combining an ensemble of weak classifiers, each of which needs only to be moderately accurate on the training set. Ensemble learning has received considerable attention from machine learning and artificial intelligence fields because of its remarkable performance improvement and flexible integration with the traditional learning algorithms such as decision tree (DT), neural networks (NN), and SVM, etc. In those researches, all of DT ensemble studies have demonstrated impressive improvements in the generalization behavior of DT, while NN and SVM ensemble studies have not shown remarkable performance as shown in DT ensembles. Recently, several works have reported that the performance of ensemble can be degraded where multiple classifiers of an ensemble are highly correlated with, and thereby result in multicollinearity problem, which leads to performance degradation of the ensemble. They have also proposed the differentiated learning strategies to cope with performance degradation problem. Hansen and Salamon (1990) insisted that it is necessary and sufficient for the performance enhancement of an ensemble that the ensemble should contain diverse classifiers. Breiman (1996) explored that ensemble learning can increase the performance of unstable learning algorithms, but does not show remarkable performance improvement on stable learning algorithms. Unstable learning algorithms such as decision tree learners are sensitive to the change of the training data, and thus small changes in the training data can yield large changes in the generated classifiers. Therefore, ensemble with unstable learning algorithms can guarantee some diversity among the classifiers. To the contrary, stable learning algorithms such as NN and SVM generate similar classifiers in spite of small changes of the training data, and thus the correlation among the resulting classifiers is very high. This high correlation results in multicollinearity problem, which leads to performance degradation of the ensemble. Kim,s work (2009) showedthe performance comparison in bankruptcy prediction on Korea firms using tradition prediction algorithms such as NN, DT, and SVM. It reports that stable learning algorithms such as NN and SVM have higher predictability than the unstable DT. Meanwhile, with respect to their ensemble learning, DT ensemble shows the more improved performance than NN and SVM ensemble. Further analysis with variance inflation factor (VIF) analysis empirically proves that performance degradation of ensemble is due to multicollinearity problem. It also proposes that optimization of ensemble is needed to cope with such a problem. This paper proposes a hybrid system for coverage optimization of NN ensemble (CO-NN) in order to improve the performance of NN ensemble. Coverage optimization is a technique of choosing a sub-ensemble from an original ensemble to guarantee the diversity of classifiers in coverage optimization process. CO-NN uses GA which has been widely used for various optimization problems to deal with the coverage optimization problem. The GA chromosomes for the coverage optimization are encoded into binary strings, each bit of which indicates individual classifier. The fitness function is defined as maximization of error reduction and a constraint of variance inflation factor (VIF), which is one of the generally used methods to measure multicollinearity, is added to insure the diversity of classifiers by removing high correlation among the classifiers. We use Microsoft Excel and the GAs software package called Evolver. Experiments on company failure prediction have shown that CO-NN is effectively applied in the stable performance enhancement of NNensembles through the choice of classifiers by considering the correlations of the ensemble. The classifiers which have the potential multicollinearity problem are removed by the coverage optimization process of CO-NN and thereby CO-NN has shown higher performance than a single NN classifier and NN ensemble at 1% significance level, and DT ensemble at 5% significance level. However, there remain further research issues. First, decision optimization process to find optimal combination function should be considered in further research. Secondly, various learning strategies to deal with data noise should be introduced in more advanced further researches in the future.

• Journal of Intelligence and Information Systems
• /
• v.20 no.2
• /
• pp.123-136
• /
• 2014

Recently, online shopping has further developed as the use of the Internet and a variety of smart mobile devices becomes more prevalent. The increase in the scale of such shopping has led to the creation of many Internet shopping malls. Consequently, there is a tendency for increasingly fierce competition among online retailers, and as a result, many Internet shopping malls are making significant attempts to attract online users to their sites. One such attempt is keyword marketing, whereby a retail site pays a fee to expose its link to potential customers when they insert a specific keyword on an Internet portal site. The price related to each keyword is generally estimated by the keyword's frequency of appearance. However, it is widely accepted that the price of keywords cannot be based solely on their frequency because many keywords may appear frequently but have little relationship to shopping. This implies that it is unreasonable for an online shopping mall to spend a great deal on some keywords simply because people frequently use them. Therefore, from the perspective of shopping malls, a specialized process is required to extract meaningful keywords. Further, the demand for automating this extraction process is increasing because of the drive to improve online sales performance. In this study, we propose a methodology that can automatically extract only shopping-related keywords from the entire set of search keywords used on portal sites. We define a shopping-related keyword as a keyword that is used directly before shopping behaviors. In other words, only search keywords that direct the search results page to shopping-related pages are extracted from among the entire set of search keywords. A comparison is then made between the extracted keywords' rankings and the rankings of the entire set of search keywords. Two types of data are used in our study's experiment: web browsing history from July 1, 2012 to June 30, 2013, and site information. The experimental dataset was from a web site ranking site, and the biggest portal site in Korea. The original sample dataset contains 150 million transaction logs. First, portal sites are selected, and search keywords in those sites are extracted. Search keywords can be easily extracted by simple parsing. The extracted keywords are ranked according to their frequency. The experiment uses approximately 3.9 million search results from Korea's largest search portal site. As a result, a total of 344,822 search keywords were extracted. Next, by using web browsing history and site information, the shopping-related keywords were taken from the entire set of search keywords. As a result, we obtained 4,709 shopping-related keywords. For performance evaluation, we compared the hit ratios of all the search keywords with the shopping-related keywords. To achieve this, we extracted 80,298 search keywords from several Internet shopping malls and then chose the top 1,000 keywords as a set of true shopping keywords. We measured precision, recall, and F-scores of the entire amount of keywords and the shopping-related keywords. The F-Score was formulated by calculating the harmonic mean of precision and recall. The precision, recall, and F-score of shopping-related keywords derived by the proposed methodology were revealed to be higher than those of the entire number of keywords. This study proposes a scheme that is able to obtain shopping-related keywords in a relatively simple manner. We could easily extract shopping-related keywords simply by examining transactions whose next visit is a shopping mall. The resultant shopping-related keyword set is expected to be a useful asset for many shopping malls that participate in keyword marketing. Moreover, the proposed methodology can be easily applied to the construction of special area-related keywords as well as shopping-related ones.