• Korea and Global Affairs
• /
• v.1 no.2
• /
• pp.171-208
• /
• 2017

This paper is to analyze the type characteristics and prospects of the North Korean nuclear strategy. To this end, the paper is composed of 5 chapters titled introduction; the concept and type of nuclear strategy; the nuclear capabilities of North Korea and the declarative nuclear strategy; the operational characteristics and prospects of the North Korean nuclear strategy; and conclusion. Recently, the deployment of nuclear weapons and the enhancement of nuclear capabilities in North Korea have raised serious problems in our security and military preparedness. Nuclear strategy means military strategy related to the organization, deployment and operation of nuclear weapons. The study of North Korea's nuclear strategy begins with a very realistic assumption that the nuclear arsenal of North Korea has been substantiated. It is a measure based on North Korea's nuclear arsenal that our defense authorities present the concepts of preemptive attack, missile defense, and mass retaliation as countermeasures against the North Korean nuclear issue and are in the process of introducing and deploying them. The declared nuclear declaration strategy of the DPRK is summarized as: (1)Nuclear deterrence and retaliation strategy under the (North Korea's) Nuclear Weapons Act, (2)Nuclear preemptive aggression, (3)The principle of 'no first use' of nuclear weapons in the 7th Congress. And the intentions and operational characteristics of the North Korean nuclear strategy are as follows: (1)Avoiding blame through imitation of existing nuclear state practices, (2)Favoring of nuclear strategy through declarative nuclear strategy, (3)Non-settlement of nuclear strategy due to gap between nuclear capability and nuclear posture. North Korea has declared itself a nuclear-weapon state through the revised Constitution(2012.7), the Line of 'Construction of the Nuclear Armed Forces and the Economy'(2013.3), and the Nuclear Weapons Act(2013.4). However, the status of "nuclear nations" can only be granted by the NPT, which is already a closed system. Realistically, a robust ROK-US alliance and close US-ROK cooperation are crucial to curbing and overcoming the North Korean nuclear threat we face. On this basis, it is essential not only to deter North Korea's nuclear attacks, but also to establish and implement our own short-term, middle-term and long-term political and military countermeasures for North Korea's denuclearization and disarmament.

• Journal of radiological science and technology
• /
• v.37 no.4
• /
• pp.331-339
• /
• 2014

To test feasibility of proton arc therapy (PAT) in the treatment of para-aortic lymph node tumor and compare its dosimetric properties with advanced radiotherapy techniques such as intensity modulated radiation therapy (IMRT) and conventional 3D conformal proton beam therapy (PBT). The treatment plans for para-aortic lymph node tumor were planned for 9 patients treated at our institution using IMRT, PBT, and PAT. Feasibility test and dosimetric evaluation were based on comparisons of dose volume histograms (DVHs) which reveal mean dose, $D_{30%}$, $D_{60%}$, $D_{90%}$, $V_{30%}$, $V_{60%}$, $V_{90%}$, organ equivalent doses (OEDs), normal tissue complication probability (NTCP), homogeneity index (HI) and conformity index (CI). The average doses delivered by PAT to the liver, kidney, small bowel, duodenum, stomach were 7.6%, 3%, 17.3%, 26.7%, and 14.4%, of the prescription dose (PD), respectively, which is higher than the doses delivered by IMRT (0.4%, 7.2%, 14.2%, 15.9%, and 12.8%, respectively) and PBT (4.9%, 0.5%, 14.12%, 16.1% 9.9%, respectively). The average homogeneity index and conformity index of tumor using PAT were 12.1 and 1.21, respectively which were much better than IMRT (21.5 and 1.47, respectively) and comparable to PBT (13.1 and 1.23, respectively). The result shows that both NTCP and OED of PAT are generally lower than IMRT and PBT. This study demonstrates that PAT is better in target conformity and homogeneity than IMRT and PBT but worse than IMRT and PBT for most of dosimetric factor which indicate that PAT is not recommended for the treatment of para-aortic lymph node tumor.

• Korean Chemical Engineering Research
• /
• v.52 no.6
• /
• pp.826-833
• /
• 2014

Driven by both environmental and economic reasons, the development of small to medium scale GTL(gas-to-liquid) process for offshore applications and for utilizing other stranded or associated gas has recently been studied increasingly. Microchannel GTL reactors have been prefrered over the conventional GTL reactors for such applications, due to its compactness, and additional advantages of small heat and mass transfer distance desired for high heat transfer performance and reactor conversion. In this work, multi-microchannel reactor was simulated by using commercial CFD code, ANSYS FLUENT, to study the geometric effect of the microchannels on the heat transfer phenomena. A heat generation curve was first calculated by modeling a Fischer-Tropsch reaction in a single-microchannel reactor model using Matlab-ASPEN integration platform. The calculated heat generation curve was implemented to the CFD model. Four design variables based on the microchannel geometry namely coolant channel width, coolant channel height, coolant channel to process channel distance, and coolant channel to coolant channel distance, were selected for calculating three dependent variables namely, heat flux, maximum temperature of coolant channel, and maximum temperature of process channel. The simulation results were visualized to understand the effects of the design variables on the dependent variables. Heat flux and maximum temperature of cooling channel and process channel were found to be increasing when coolant channel width and height were decreased. Coolant channel to process channel distance was found to have no effect on the heat transfer phenomena. Finally, total heat flux was found to be increasing and maximum coolant channel temperature to be decreasing when coolant channel to coolant channel distance was decreased. Using the qualitative trend revealed from the present study, an appropriate process channel and coolant channel geometry along with the distance between the adjacent channels can be recommended for a microchannel reactor that meet a desired reactor performance on heat transfer phenomena and hence reactor conversion of a Fischer-Tropsch microchannel reactor.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.1
• /
• pp.19-25
• /
• 2015

Nowadays, CAD/CAM is broadly used in dentistry for inlays, crowns, implant abutments and its spectrum is expanding to complete dentures. Utilizing CAD/CAM to fabricate complete dentures is expected to decrease chair time and the number of visits, thus decreasing total fabrication time, expenses and errors caused during fabrication processes. One of the systems using CAD/CAM, DENTCA$^{TM}$ CAD/CAM denture (DENTCA Inc. Los Angeles, USA) scans edentulous impressions, designs dentures digitally, fabricates try-in dentures by 3D printing and converts them into final dentures. Patients can wear final dentures after only 2 - 3 visits with satisfying adaptation. This case report introduces a 71-year-old male patient who visited to consult remaking of existing old dentures. Residual teeth with bad prognosis and root remnants were extracted and the patient used reformed existing mandibular denture for 2 months. And then DENTCA system started. One-step border molding was done using conventional tray of adequate size provided by DENTCA system and wash impression was taken. Gothic arch tracing was completed based on the vertical dimension of existing dentures. Both maxillary and mandibular trays were placed to the resultant centric relation and bite registration was taken. Then DENTCA scanned the bite registration, arranged the teeth, completed the festooning and fabricated the try-in dentures by 3D printing. The try-in dentures were positioned, occlusal plane and occlusal relations were evaluated. The try-in dentures were converted to final dentures. To create bilateral balanced occlusion, occlusal adjustment was done after clinical remounting using facebow transfer. The result was satisfactory and it was confirmed by patient and operator.

• Journal of Bio-Environment Control
• /
• v.18 no.4
• /
• pp.363-369
• /
• 2009

This experiment was conducted to find out the effect of nutrient solution composition on the growth of cucumber plants and the changes in macro-elements in nutrient solutions in recirculating hydroponic systems. Cucumber plants (Cucumis sativus L. cv. Joeun Baegdadagi) were grown in closed perlite cultivation systems supplied with different nutrient solutions developed by NHRS (National Horticultural Research Station in Japan), Yamasaki, PBG (Proefstation voor Bloemisterij en Glasgroente), and NIHHS (National Institute of Horticultural and Herbal Science in Korea). The concentrations of $NO_{3^-}N$, $Ca^{2+}$, $Mg^{2+}$, and $SO_{4^-}S$ in the recycled nutrient solutions increased but that of $NH_{4^-}N$ decreased gradually in all the treatments. The $PO_{4^-}P$ and $K^+$ concentrations were continuously reduced from the beginning of the harvest to the harvest peak period. There were no significant differences in the concentrations of $NO_{3^-}N$, $NH_{4^-}N$, and $Ca^{2+}$ in the recirculated nutrient solutions among four treatments, while the concentrations of $PO_{4^-}P$ and $K^+$ were lowest and those of $Mg^{2+}$ and $SO_{4^-}S$ were highest in the treatment of Yamasaki's nutrient solution. All growth-related parameters of cucumber plants except for leaf number were not significantly affected by the nutrient solution compositions. Due to its low concentrations of $PO_{4^-}P$ and $K^+$ in the recycled nutrient solution, however, the number and yield of cucumber fruits were lowest in the treatment of Yamasaki's nutrient solution.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.1
• /
• pp.85-92
• /
• 2005

The performance of a novel fermentation process, adopting a sludge blanket type configuration for higher hydrolysis/acidogenesis of the municipal primary sludge, was investigated under batch and semi-continuous conditions with various pH and temperature conditions. This acid elutriation slurry reactor provided higher system performance with a short HRT (5 days) and higher acidogenic effluent quality under pH 9 and thermophilic ($55^{\circ}C$) conditions. The hydrolysis of the sludge was revealed to be significantly dependent on seasonal effects for sludge characteristics but with little impact on acidogenesis. Based on the rainy season at the optimum conditions, VFA production and recovery fraction ($VFA_{COD}/COD$) were $0.18\;g\;VFA_{COD}\;g^{-1}\;VSS_{COD}$ and 63%. As byproducts, nitrogen and phosphorus releasing were $0.006\;g\;N\;g^{-1}\;VSS_{COD}$ and $0.003\;g\;P\;g^{-1}\;VSS_{COD}$, respectively. For the mass balance in a full-scale plant($Q=158,880\;m^3\;day^{-1}$) based on the rainy season, the VFA and non-VFA(as COD) production were $3,110\;kg\;VFA_{COD}\;day^{-1}$ and $1,800\;kg\;COD\;day^{-1}$, resulting in an increase of organics of $31\;mg\;COD\;L^{-1}$ and $20\;mg\;VFA_{COD}\;L^{-1}$ and nutrients of $0.7\;mg\;N\;L^{-1}$ and $0.3\;mg\;P\;L^{-1}$ in the influent sewage. The economical benefit from this process application was estimated to be about $67 per $1,000m^3$ of sewage except for energy requirements and also, better benefits can be expected during the dry season. Also, the results revealed that the process has various additional advantages such as pathogen-free stabilized solids production, excellent solids control and economical benefits.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.1
• /
• pp.36-43
• /
• 2012

Purpose: To analyze the stress distribution of the implant and its supporting structures through 3D finite elements analysis for implants with different hexagon heights and to make the assessment of the mechanical stability and the effect of the elements. Materials and methods: Infinite elements modeling with CAD data was designed. The modeling was done as follows; an external connection type ${\phi}4.0mm{\times}11.5mm$ Osstem$^{(R)}$ USII (Osstem Co., Pusan, Korea) implant system was used, the implant was planted in the mandibular first molar region with appropriate prosthetic restoration, the hexagon (implant fixture's external connection) height of 0.0, 0.7, 1.2, and 1.5 mm were applied. ABAQUS 6.4 (ABAQUS, Inc., Providence, USA) was used to calculate the stress value. The force distribution via color distribution on each experimental group's implant fixture and titanium screw was studied based on the equivalent stress (von Mises stress). The maximum stress level of each element (crown, implant screw, implant fixture, cortical bone and cancellous bone) was compared. Results: The hexagonal height of the implant with external connection had an influence on the stress distribution of the fixture, screw and upper prosthesis and the surrounding supporting bone. As the hexagon height increased, the stress was well distributed and there was a decrease in the maximum stress value. If the height of the hexagon reached over 1.2mm, there was no significant influence on the stress distribution. Conclusion: For implants with external connections, a hexagon is vital for stress distribution. As the height of the hexagon increased, the more effective stress distribution was observed.

• KDI Journal of Economic Policy
• /
• v.13 no.1
• /
• pp.35-63
• /
• 1991

Currently, Korea's banking industry holds a sizable amount of non-performing loans which stem from the government-led bailout of many troubled firms in the 1980s. Although this burden was somewhat relieved with the aid of banks' recapitalization in the booming securities market between 1986-88, the insolvent credits still resulted in low profitability in the banking sector and have been detrimental to the progress of financial liberalization and internationalization. This paper surveys the corporate bailout experiences of major advanced countries and Korea in the past and derives a rationale for readjustment measures against non-performing loans, in which rescue plans depend on the nature of the financial system. Considering the features of Korea's financial system and the banking sector's recent performance, it discusses possible means of liquidation in keeping with the rationale. The conflict of interests among parties involved in non-performing loans is widely known as one of the major constraints in writing off the loans. Specifically, in the case of Korea, the government's excessive intervention in allocating credits has preempted the legitimate role of the banking sector, which now only passively manages its past loans, and has implicitly confused private with public risk. This paper argues that to minimize the incidence of insolvent loan readjustment, the government's role should be reduced and that the correspondent banks should be more active in the liquidation process, through the market mechanism, reflecting their access to detailed information on the troubled firms. One solution is that banks, after classifying the insolvent loans by the lateness or possibility of repayment, would swap the relatively sound loans for preferred stock and gradually write off the bad ones by expanding the banks' retained earnings and revaluing the banks' assets. Specifically, the debt-equity swap can benefit both creditors and debtors in the sense that it raises the liquidity and profitability of bank assets and strengthens the debtor's financial structure by easing the debt service burden. Such a creditor-led or market-led solution improves the financial strength and autonomy of the banking sector, thereby fostering more efficient resource allocation and risk sharing.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.8 no.2
• /
• pp.129-139
• /
• 2013

This paper is targeted on proposing ameliorating alternative to performance assessment method of GSEM through evaluating the current one, which is initiated by SMBA to induce fair competition among 5 GSEM across the country and accommodate the quality improvement of entrepreneurship education since 2005 after beginning the SMBA support, from the perspective of BSC(Balanced Scorecard) tool. Ultimately, it complements the policy defects of SMBA over GSEM, in particular, in the process of performance assessment and management. This paper carries out two studies as follow. First, throughout reviewing the previous studies relating to BSC applications to non-profit organization, it set out the direction of introducing BSC in assessing performance of GSEM in order to enhance its effectiveness. Second, it evaluate the rationality of performance assessing tools apllied to GSEM by SMBA on the basis of BSC application over non-profit organization, especially in education institution. Research results shows the following implications. First, the current evaluation system over GSEM is just merely assessment itself and not much contributions for the post performance management. Second, The annual evaluation just remains to check up whether the policy goals are met or not. Third, the current evaluation puts much emphasis just on financial inputs and hardware infra, not considering human resources and utilization of government policy and institution. Fourth, the policy goals are unilaterally focused on entrepreneurs. Fifth, the current evaluation systems do not contain any indexes relating to learning and growth perspectives for concerning sustainable and independent growing up. However, lack of empirical testing require this paper to need the further study in the future.

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.3
• /
• pp.177-183
• /
• 2004

The discharge of waste nutrient solution from greenhouse to natural ecosystem leads to the accumulation of excess nutrients that results in contamination or eutrophication. There is a need to recycle the waste nutrient solution in order to prevent the environmental hazards. The amount and kind of nutrients in waste nutrient solution might be enough to grow photosynthetic microorganisms. Hence in the present study, we examined the growth and mass cultivation of cyanobacteria in the waste nutrient solution with an objective of removing N and P and concomitantly, its mass cultivation. Four photosynthetic filamentous cyanobacteria (Anabaena HA101, HA701 and Nostoc HN601, HN701) isolated from composts and soils of the Chungnam province were used as culture strains. Among the isolates, Nostoc HN601 performed faster growth rate and higher N and P uptake in the BG-II ($NO_3{^-}$) medium when compared to those of other cyanobacterial strains. Finally, the selected isolate was tested under optimum conditions (airflow at the rate of $1L\;min^{-1}$. in 15 L reactor, initial pH 8) in waste nutrient solution from tomato hydroponic in green house condition. Results showed to remove 100% phosphate from the waste nutrient solution in the tomato hydroponics recorded over a period of 7 days. The growth rate of Nostoc HN601 was $16mg\;Chl-a\;L^{-1}$ in the waste nutrient solution from tomato hydroponics with optimum condition, whereas growth rate of Nostoc HN601 was only $9.8mg\;Chl-a\;L^{-1}$ in BG-11 media. Nitrogen fixing capacity of Nostoc HN601 was $20.9nmol\;C_2H_4\;mg^{-1}\;Chl-a\;h^{-1}$ in N-free BG-11. The total nitrogen and total phosphate concentration of Nostoc HN601 were 63.3 mg N gram dry weight $(GDW)^{-1}$ and $19.1mg\;P\;GDW^{-1}$ respectively. Collectively, cyanobacterial mass production using waste nutrient solution under green house condition might be suitable for recycling and cleaning of waste nutrient solution from hydroponic culture system. Biomass of cyanobacteria, cultivated in waste nutrient solution, could be used as biofertilizer.