• 대한한방내과학회지
• /
• 제21권5호
• /
• pp.839-844
• /
• 2000

Objectives : The purpose of study was to investigate the effect of ILlB(intravascular laser irradiation of blood) on serum lipoprotein(a) Methods : The 12 case is diagnosed as cerebrovascular diseases on computed tomograghy. The 18 case is not observed abnormality on computed tomograghy but, they have neurological sign. Blood test was enforced on the first medical examination, The 15 case with plasma lipoprotein(a) greater than 30 mg/dl have been classified into abnormal group and the 15 case of less than 30 mg/dl have been classified into control group. after ten times ILlB, It was observed that the change of plasma lipoprotein(a) and a fibrinogen of blood clotting factor. Conclusions : 1. After ten times ILlB, plasma lipoprotein(a) numerical value was decreased on 13 case of abnormal group. 2. Plasma lipoprotein(a) numerical value was decreased on 5 case of control group. 3. The twenty in fifteen patient's with hyperlipoproteinemias have been fibrinogenemias and after ILIB treatment, in the all of 16 case with hyperfibrinogenemia in the first medical examination to both abnormal and control group, plasma fibrinogen numerical value was decreased.

• 전기학회논문지
• /
• 제58권4호
• /
• pp.832-839
• /
• 2009

In this paper, we introduce an design of fuzzy relation-based fuzzy neural networks with multi-output. Fuzzy relation-based fuzzy neural networks comprise the network structure generated by dividing the entire input space. The premise part of the fuzzy rules of the network reflects the relation of the division space for the entire input space and the consequent part of the fuzzy rules expresses three types of polynomial functions such as constant, linear, and modified quadratic. For the multi-output structure the neurons in the output layer were connected with connection weights. The learning of fuzzy neural networks is realized by adjusting connections of the neurons both in the consequent part of the fuzzy rules and in the output layer, and it follows a back-propagation algorithm. In addition, in order to optimize the network, the parameters of the network such as apexes of membership functions, learning rate and momentum coefficient are automatically optimized by using real-coded genetic algorithm. Two examples are included to evaluate the performance of the proposed network.

• 한국산학기술학회논문지
• /
• 제14권2호
• /
• pp.835-839
• /
• 2013

본 논문에서는 상대적으로 낮은 BER에서 동작시키거나 순방향에러제어코딩기법을 이용하여 광통신 시스템의 용량을 증가시키는 방안에 대하여 연구를 수행하였다. 코딩이득은 코딩된 신호와 코딩이 안 된 신호의 에러확률의 비로 정의된다. 코딩 이득이 증가하면, 코딩이 안 된 신호의 에러확률이 감소하기 때문에 의 최적의 값이 감소하는데 이것은 유효비트기간이 이진기호지속기간보다 길기 때문에 부분적으로 무시할 수 있다. 여러 가지의 코드율에 대해, 코딩이득에 대한 전송용량을 보이고 있는데, 최대 75Gb/s 정도의 전송용량은 이러한 코딩기법을 통해 얻을 수 있음을 확인하였다.

• 한국의류학회지
• /
• 제41권5호
• /
• pp.825-839
• /
• 2017

Generative Art (also called as the art of the algorithm) creates unexpected results, moving autonomously according to rules or algorithms. The evolution of digital media in art, which tries to seek novelty, increases the possibility of new artistic fields; subsequently, this study establishes the basis for new design approaches by analyzing visual cases of Generative Art that have emerged since the 20th century and characteristics expressed on fashion. For the methodology, the study analyzes fashion designs that have emerged since 2000, based on theoretical research that includes literature and research papers relating to Generative Art. According to the study, expression characteristics shown in fashion, based on visual properties of Generative Art, are as follows. First, abstract randomness is expressed with unexpected coincidental forms using movements of a creator and properties of materials as variables in accordance to rules or algorithms. Second, endlessly repeated pattern imitation expresses an emergent shape by endless repetition created by a modular system using rules or 3D printing using a computer algorithm. Third, the systematic variability expresses constantly changing images with a combination of system and digital media by a wearing method. It is expected that design by algorithm becomes a significant method in producing other creative ideas and expressions in modern fashion.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.830-839
• /
• 1993

Agricultural hydraulic robot which was reported in Part Ⅰ had been developed . The robot satisfied performance to intend before development. For actual use, however, it have been necessary to reduce manipulator weigh and to simplify construction of hydraulic control valve. Then, working stress of manipulator link and pressure fluctuation of hydraulic circuit were measured. Step and frequency response tests were done subject to amplitude of reference voltage of 0.1 , 0.3 , 0.5 and 1.0v. and delivery pressure of 3.5 and 5.0MPa. Working stress were about 25% comparing with fatigue strength, Thus, mass of manipulator might be reduce to 30 %. In hydraulic control system, virtual natural frequency of 6.5Hz is produced from the combination of drain passage area shortage of servovalve. Further , because of passage area shortage , working pressure at both side of cylinder was acted on. This phenomenon prevent utilize effectively engine power. Then, control valve for new model was p oposed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.287-290
• /
• 1998

It was investigated that the dielectric properties of ferroelectric materials using PZT-5A and PZT thin films. PZT-5A was 20mm diameters, 0.71mm, 0.51mm and 0.41mm thickness respectively and having c-axis preferred orientation. Electrodes(Al) were deposited by evaporation method. PZT thin film was deposited on Pt/SiO$_2$/Si substrate by RF magnetron sputtering method, and annealed at 750$^{\circ}C$ with RTA. Dielectric constants were measured automatically by computer measuring system. Dielectric constants were changed rapidly from 817 to 888 in 0.41mm thickness PZT-5A, 823 to 890 in 0.51mm and 822 to 839 in 0.71mm as the electric field grown. In the case of PZT thin film, dielectric constants were changed from 724 to 1173 in 4500${\AA}$ thickness, 721 to 1204 in 5500${\AA}$ thickness and 811 to 1407 in 7000${\AA}$ thickness.

• 한국전기전자재료학회논문지
• /
• 제18권9호
• /
• pp.833-839
• /
• 2005

This work describes the effect of the number of roll pressing and the composition of carbon black on the electric and mechanical properties of carbon-PTFE electrode, in which composition is MSP20 : carbon black : $PTFE\;=\;95-X\;:\;X\;:\;5wt.\%$. It was found that the best electric and mechanical properties were obtained for sheet electrode roll pressed about 15 times and for sheet electrode, in which composition is MSP20 : carton black $PTFE\;=\;80\;:\;15\;:\;5wt.\%$. These behaviors could be explained by the network structure of PTFE fibrils and conducting Paths linked with carbon blacks, respectively. On the other hand, cell capacitor using the sheet electrode with $15wt.\%$ of carbon black attached on aluminum current collector with the electric conductive adhesive, in composition is carbon black $CMC\;=\;70\;:\;30wt.\%$, has exhibited the best rate capability between $0.5\;mA/cm^2\~100\;mA/cm^2$ current density and the lowest ESR.

• 폴리머
• /
• 제25권6호
• /
• pp.833-839
• /
• 2001

광산란 장치를 이용하여 메탈로센 촉매 하에 제조된 메탈로센 선형 저밀도 폴리에틸렌의 결정화거동을 Ziegler-Natta 촉매에 의하여 제조된 선형 저밀도 폴리에틸렌과 비교하여 보았다. 특히 branching수와 길이 그리고 공단량체의 함량이 결정화 거동에 미치는 영향을 중점적으로 살펴보았다. 같은 수의 branching 수를 가지고 있는 메탈로센 선형 저밀도 폴리에틸렌은 기존의 선형 저밀도 폴리에틸렌에 비하여 결정화를 시작하기 위한 induction time이 길어짐을 알 수 있으나 구정의 성장속도는 두 경우가 유사함을 확인하였다. 메탈로센 선형 저밀도 폴리에틸렌의 branching 수를 감소시킬 경우 induction time과 구정성장속도가 모두 빨라짐을 알 수 있었다. 또한 일반적으로 최대 구정의 크기는 branching 수에 관계없이 메탈로센 선형 저밀도 폴리에틸렌이 기존의 선형 저밀도 폴리에틸렌에 비하여 커짐을 알 수 있었다.

• 성인간호학회지
• /
• 제18권5호
• /
• pp.828-839
• /
• 2006

Purpose: The purpose of present study was to explore relationship between physical activity (PA) behavior and self-efficacy among older Korean-Americans (OKAs) based on reviewing major theories that are used to understand PA behavior, particularly as they relate to older adults within sociocultural contexts. Methods: 151 OKAs, living in California, were recruited and interviewed once. Self-efficacy and PA level were measured by Exercise Self-Efficacy Scale, Community Healthy Activities Model Program for Seniors (K-CHAMPS) questionnaire, respectively. Results: 82.8% of OKA women and 72.4% of OKA men had relatively low ($38.8{\pm}29.3$) self-efficacy related to PA. Exercise self-efficacy was statistically significant and positively associated with frequency for moderate and greater PA (r = 0.25, p < .01), frequency for all listed PA (r = 0.21, p < .05), caloric expenditure for moderate and greater PA (r = 0.23, p < .01), and caloric expenditure for all listed PA (r = 0.31, p < .01). Conclusion: Social Cognitive Theory including self-efficacy can provide insight about how to shape strategies that encourage OKAs to adhere to regular PA because it focuses on environmental as well as personal factors. Increased efforts are needed to understand the other factors associated with being active in OKAs.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.839-846
• /
• 2004

The objective of this study is the evaluation of the tunneling effect on the groundwater-surface water interaction. The designed tunnel line is laid beneath the Gapo-cheon, which runs throughout study area. And, the pre-evaluation of the tunnel-influence on the Gapo-cheon is urgently needed. However, it is very difficult to find out the similar domestic and/or foreign cases. In this study, we would exclude the numerical modeling technique with insufficient data. Instead of the evaluation of the tunneling effect on the groundwater-surface water interaction with the numerical modeling, we monitored the flow rate of surface water at various point. We measured the flow rate of surface water at 5 points. With the results of surface flow, we can conclude that 39% of flow rate in Gapo-cheon is contributed by the groundwater discharge, as baseflow.