• Journal of Korean Ophthalmic Optics Society
• /
• v.14 no.4
• /
• pp.77-81
• /
• 2009

Purpose: To study the change of fixation disparity and accommodation as fusion contrast is deteriorated. Methods: 16 subjects who had above 20/20 and stereopsis took part. Monocular and binocular refraction were done with Zeiss Polatest Classic whereas the critical angle for stereopsis was done with TNO. A computer programmed with Random-Dot stereogram and vernier test managed a precise change of the fusion contrast and exposure time. Results: The fixation disparity was influenced by reduction of fusion contrast and had tendancy to exophoria (p=0.0004), especially it is considerably higher when uncrossed disparity was shown to exophoric subjects. Although accommodation was not influenced by a change of fusion contrast (p=0.803), vernier acuity was influenced (p=0.0000). Conclusions: Exophoric trend arose as the fusion contrast was reduced, nevertheless there was no accommadative change.

• The Korean Journal of Physiology and Pharmacology
• /
• v.7 no.6
• /
• pp.375-379
• /
• 2003

$Ca^{2+}$ influx appears to be important for triggering myoblast fusion. It remains, however, unclear how $Ca^{2+}$ influx rises prior to myoblast fusion. Recently, several studies suggested that NMDA receptors may be involved in $Ca^{2+}$ mobilization of muscle, and that $Ca^{2+}$ influx is mediated by NMDA receptors in C2C12 myoblasts. Here, we report that other types of ionotropic glutamate receptors, non-NMDA receptors (AMPA and KA receptors), are also involved in $Ca^{2+}$ influx in myoblasts. To explore which subtypes of non-NMDA receptors are expressed in C2C12 myogenic cells, RT-PCR was performed, and the results revealed that KA receptor subunits were expressed in both myoblasts and myotubes. However, AMPA receptor was not detected in myoblasts but expressed in myotubes. Using a $Ca^{2+}$ imaging system, $Ca^{2+}$ influx mediated by these receptors was directly measured in a single myoblast cell. Intracellular $Ca^{2+}$ level was increased by KA, but not by AMPA. These results were consistent with RT-PCR data. In addition, KA-induced intracellular $Ca^{2+}$ increase was completely suppressed by treatment of nifedifine, a L-type $Ca^{2+}$ channel blocker. Furthermore, KA stimulated myoblast fusion in a dose-dependent manner. CNQX inhibited not only KA-induced myoblast fusion but also spontaneous myoblast fusion. Therefore, these results suggest that KA receptors are involved in intracellular $Ca^{2+}$ increase in myoblasts and then may play an important role in myoblast fusion.

• Journal of Korean Neurosurgical Society
• /
• v.63 no.2
• /
• pp.228-236
• /
• 2020

Objective : It can be assumed that the progression of scoliosis in the juvenile period will increase the asymmetry in the rib cage, and thus will contribute to an increase in the breast asymmetry (BA) in the future. We are looking for answers to the questions; "How will the breasts look with respect to each other and what is the possibility of developing BA in the early follow-up period following the early surgical treatment and final fusion surgery of juvenile idiopathic scoliosis (JIS)?" For this reason, in this study, we aimed to evaluate the breast asymmetries of patients in the period after the final fusion. Methods : Following growing rod treatment, final fusion was achieved in 12 females with JIS. We used the anthropomorphic measurement of the modified BREAST-V formula to assess whether there was an asymmetry between the breasts after an average of 4.8 years (2-11) following final fusion. Results : In comparison, the mean volume of the left breast (222.4 mL [range, 104.1-330.2]) was larger than the mean volume of the right breast volume (214.5 mL [range, 95.2-326.7]) (p=0.034). The left breast was larger in 75% of the patients. BA was observed in 50% of the patients. No correlation was detected between the Cobb angle of the patient after final fusion and BA (p=0.688). Conclusion : In the late follow-up period, BA was detected in 50% of the patients with JIS who achieved final fusion after treatment with growing rod. In majority of the patients, left breast was larger. The patients with JIS and their families can be informed prior to the operation about the probability of BA seen in the follow-up period after fusion.

• Journal of Korean Neurosurgical Society
• /
• v.45 no.2
• /
• pp.81-84
• /
• 2009

Objective : Many biomechanical and clinical studies on adjacent segment degeneration (ASD) have addressed cranial segment. No study has been conducted on caudal segment degeneration after upper segment multiple lumbar fusions. This is a retrospective investigation of the L5-S1 segment after spinal fusion at and above L4-5, which was undertaken to analyze the rate of caudal ASD at L5-S1 after spinal fusion on and above L4-5 and to determine that factors that might have influenced it. Methods : The authors included 67 patients with L4-5, L3-5, or L2-5 posterior fusions. Among these patients, 28 underwent L4-5 fusion, 23 L3-5, and 16 L2-5 fusions. Pre- and postoperative radiographs were analyzed to assess degenerative changes at L5-S1. Also, clinical results after fusion surgery were analyzed. Results : Among the 67 patients, 3 had pseudoarthrosis, and 35 had no evidence of ASD, cranially and caudally. Thirteen patients (19.4%) showed caudal ASD, 23 (34.3%) cranial ASD, and 4 (6.0%) both cranial and caudal ASD. Correlation analysis for caudal ASD at L5-S1 showed that pre-existing L5-S1 degeneration was most strongly correlated. In addition, numbers of fusion segments and age were also found to be correlated. Clinical outcome was not correlated with caudal ASD at L5-S1. Conclusion : If caudal and cranial ASD are considered, the overall occurrence rate of ASD increases to 50%. The incidence rate of caudal ASD at L5-S1 was significantly lower than that of cranial ASD. Furthermore, the occurrence of caudal ASD was found to be significantly correlated with pre-existing disc degeneration.

• Journal of Welding and Joining
• /
• v.34 no.5
• /
• pp.70-76
• /
• 2016

In this study, Microstructure and tensile properties in arc brazed joints of 1000MPa grade DP steel using Cu-Si insert metal were investigated. The fusion zone was composed of Cu phase which solidified a little Fe and Si. The former phase formed due to dilute the edge of base material by arc, although Fe was not solid solution in Cu at the room temperature. Cu3Si particles formed by crystallization at $1100^{\circ}C$ during faster cooling. After the tensile shear test, there are no differences between the brazed joint efficiencies. The maximum joint efficient was about 37% compared to strength of base metal. It is better than that of arc brazed joint of DP steel using Cu-Sn filler metal. Fracture position of all brazing conditions was in the fusion zone. Crack initiation occurred at three junction point which was a stress singularity point of upper sheet, lower sheet and the fusion zone. And then crack propagated across the fusion zone. The reason why the fracture occurred at fusion zone was that the hardness of fusion zone was lower than that of base material and heat affected zone. The correlation among maximum load and hardness of fusion zone and EST at fractured position was $R^2=0.9338$. Therefore, this means that hardness and EST can have great impact on maximum load.

• Transactions of the Korean hydrogen and new energy society
• /
• v.23 no.1
• /
• pp.56-64
• /
• 2012

The ITER fuel cycle is designed for DT operation in equimolar ratio. It involves not only a group of fuelling system and torus cryo-pumping system of the exhaust gases through the divertor from the torus in tokamak plant, but also from the exhaust gas processing of the fusion effluent gas mixture connected to the hydrogen isotope separation in cryogenic distillation to the final safe storage & delivery of the hydrogen isotopes in tritium plant. Tritium plant system supplies deuterium and tritium from external sources and treats all tritiated fluids in ITER operation. Every operation and affairs is focused on the tritium inventory accountancy and the confinement. This paper describes the major fuel cycle processes and interfaces in the tritium plant in aspects of upcoming technologies for future hydrogen and/or hydrogen isotope utilization.

• Microbiology and Biotechnology Letters
• /
• v.32 no.2
• /
• pp.101-109
• /
• 2004

In order to enhance the productivity of AVM $B_{la}$ produced by Streptomyces avermitilis as a secondary metabolite, we established a basic protocol necessary for protoplast fusion with high-producing strains as a fusion partner, and then obtained various kinds offusants by adopting a massive strain-development procedure (a miniaturized strain screening system). An alternative fusion method using UV and/or NTG mutation of protoplasts was developed to screen genetic recombinants without specific selectable markers. In this method, the mutants obtained by protoplast fusion after UV and/or NTG treatment (95% death rate) of the respective fusion partner (protoplasts of the respective mutants resistant against L-isoleucine antimetabolites such as O-methylthreonine and/or azaleucine) were regarded as DNA-recombined protoplast fusants. Notably it was demonstrated that most of the protoplast recombinants obtained by the UV mutation method were able to biosynthesize higher amount of AVM $B_{la}$ , reaching almost three times higher level (almost equal to the industrial productivity), compared to the average AVM Bla amount of the parallel mother strains.

• Korean Journal of Community Nutrition
• /
• v.17 no.4
• /
• pp.376-389
• /
• 2012

The purpose of this study was to develop a fusion-food cooking program and apply that to sixth grade elementary school students, and to investigate its' effects on their knowledge, preferences, and perceptions of Korean traditional foods. The program focused on ten components. Students learned the general features of Korean traditional foods and Western foods in the 1st lesson. They learnt about kinds, nutrition value, and histories of kimchi, Tteok (rice cake), and Jeon (pan fried food), and cooked two fusion-foods of kimchi, Tteok, and Jeon each. As a result of learning about those food items, the students advanced their knowledge (p < 0.001) of kimchi, Tteok, and Jeon. Their preferences for Tteok (p < 0.05) and Jeon (p < 0.01) were increased, but those for kimchi remained unchanged. The interest (p < 0.05) and preferences (p < 0.01) for the general Korean traditional foods were increased. In conclusion, our results suggested that the fusion-food cooking program had the ability to improve elementary school students' perceptions of Korean traditional foods by increasing their knowledge, preferences, and interest in them. Furthermore it was considered that the program could help students understand the value of Korean traditional foods and in turn may encourage them to consume such food items more frequently. Since the fusion-food cooking activity program can be a good learning program as shown by the results of this study, more fusion-foods cooking activity programs, which are not discussed in this study, should be evaluated and developed in the future.

• Korean Journal of Environmental Agriculture
• /
• v.24 no.3
• /
• pp.232-237
• /
• 2005

This study was conducted to elucidate the effects of NaOH fusion treatment on Na-P1 zeolite synthesis from fly ash and to evaluate its optimal condition. NaOH fusion treatment of fly ash led to Na-P1 zeolite with shorter reaction time and higher quality compared that of simple hydrothermal method. Mixed zeolite phases of Na-P1 and hydroxy sodalite were formed by the fusion treatment below $450^{\circ}C$, whereas only Na-P1 zeolite was formed above $550^{\circ}C$. Ratio of NaOH/fly ash, reaction times, fusion temperature and solid/liquid ratio strongly affected the kind and crystallinity of the zeolite formed. The CEC of Na-P1 zeolite formed at the optimum reaction conditions of NaOH/fly ash ratio 0.9 and solid/liquid ratio $1/5.0{\sim}1/7.5$ after NaOH fusion treatment at $550^{\circ}C$ for 2 hours was about $398cmol^+kg^{-1}$ which was 40% higher than those of control products. Therefore, it is clear that NaOH fusion treatment of fly ash in open system could lead to Na-P1 zeolite with high purity.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.4
• /
• pp.59-68
• /
• 2009

This paper addresses a hybrid multi-focus image fusion scheme using the recent curvelet transform constructions. Hybridization is obtained by combining the MS fusion rule with a novel "copy" method. The proposed scheme use MS rule to fuse the m most significant terms in spectrum of an image at each decomposition level. The scheme is dubbed in this work as m-term fusion in adherence to its use of the MSC (most significant coefficients) in the transform set at any given scale, orientation, and translation. We applied the edge-sensitive objective quality measure proposed by Xydeas and Petrovic to evaluate the method. Experimental results show that the proposed scheme is a potential alternative to the redundant, shift-invariant Dual-Tree Complex Wavelet transforms. In particular, it was confirmed that a 50% m-term fusion produces outputs with no visible quality degradation.