• Journal of Electrical Engineering and Technology
• /
• v.13 no.3
• /
• pp.1392-1397
• /
• 2018

The potentiometric measurement result for a high resistance up to $100P{\Omega}$ using a low resistance, a low voltage source and a commercial digital multimeter(DMM) is presented. With the method, a resistance can be easily, fast and economically measured. Using the method, resistance ranges over the $10G{\Omega}$ range which is difficult to measure using a commercial DMM and resistance ranges between $100T{\Omega}$ and $100P{\Omega}$ which cannot measure using an insulation tester were measured within accuracy of a few percent. It is expected that it can be useful to determine the temperature and voltage effect of a high resistance and an insulation material because it uses a reference resistance with a low resistance, very low temperature and voltage effect. Besides, it is expected that it can be useful to calibrate a dc high voltage divider with a large resistance ratio and a very low resistance because arbitrary resistance ratio measurements are possible with it.

• Journal of the Korea Institute of Building Construction
• /
• v.7 no.1 s.23
• /
• pp.79-84
• /
• 2007

Selection of proper root barrier as destination part of greening is very important in Root penetration resistance plan. To select proper root barrier, it need to understand composition of greening part, size, kind of plant, connection with waterproofing layer. In this point of view, we have establish greening on the roof or concrete structure, not been understand the structural mechanism. It means that we misunderstood about purpose of greening and using it. So, chosen materials and construction method was not proper for greening, it caused water leakage and decrease performance of concrete structure. Therefore, we would suggest 5 items of test methods considering environmental condition for green roof. Watertightness by water of greening part, root penetration resistance test by root penetration, bacteria resistance by must or bacteria in soil, chemical resistance by rain and chemical agent of fertilizer, and load resistance by soil depth, size of plant. These suggested test methods could be referred as guideline to test in green roof system because of not exist any performance appraisal guideline or standard. Consequently, it should be analysis as technical and institutional subdividing test methods and it need to study constantly as varied angles.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.04a
• /
• pp.5-8
• /
• 2007

Selection of proper root barrier as destination part of greening is very important in Root penetration resistance plan. To select proper root barrier, it need to understand composition of greening part, size, kind of plant, connection with waterproofing layer. In this point of view, we have establish greening on the roof or concrete structure, not been understand the structural mechanism. It means that we misunderstood about purpose of greening and using it. So, chosen materials and construction method was not proper for greening, it caused water leakage and decrease performance of concrete structure. Therefore, we examine the practical use of copper sheet considering environmental condition for green roof. Watertightness by water of greening part, root penetration resistance test by root penetration, bacteria resistance by must or bacteria in soil, chemical resistance by rain and chemical agent of fertilizer, and load resistance by soil depth, sire of plant. These suggested test methods could be referred as guideline to test in green roof system because of not exist any performance appraisal guideline or standard. Consequently, it should be analysis as technical and institutional subdividing test methods and it need to study constantly as varied angles.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.57
• /
• pp.243-282
• /
• 2013

This study aims to develop the research model about the factors that have impact on uTradeHub users' acceptance and resistance to innovation. The followings show the research hypotheses and the results of test. i) The result of H1 empirical analysis confirmed that relative advantage and task adaptedness of e-Trade have more impact on acceptance of innovation than on resistance to it. And also perceived risk and complicity of e-Trade have more impact on resistance of innovation than on acceptance to it. ii) The result of H2 analysis confirmed that the characteristics of foreign trading companies (support by CEO and IT infra maturity) has more impact on acceptance of innovation than on resistance to it. iii) The result of H3 analysis confirmed that characteristics of uTradeHub user' resistance has more impact on resistance of innovation than on acceptance to it. And also, it was confirmed that acceptance of innovation has more impact on the diffusion of e-Trade than resistance to innovation. iv) The result of H4 analysis confirmed that the difference of the degree and factors that has impact on the user's resistance and acceptance by adoption stage of e-Trade. This study has significance in that it arranges the concept and stages of e-Trade systematically and, unlike other studies, it goes beyond the acceptance and diffusion of e-Trade to the inclusion of resistance together in the model.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.5 no.2
• /
• pp.163-174
• /
• 2001

This paper is to study the characteristics of axial force behavior that operates to the part of turnout when it makes the turnout and the continuous welded rail unifying. The study is to model by using the 50kgN rail No. 15 turnout used in the domestic national railway and the UIC60 rail No. 18 turnout used in the rapid transit railway as the finite elements for analyzing the axial force behavior of the turnout by the continuous welded rail. It is to analyze the characteristics of behavior according to the change of creep resistance, ballast resistance and the change of parameter valuables of heel joint by the axial force simulation in making the continuous welded rail and then, it is to present the result. As the result of research on the parameter valuables through the analysis, it shows that the maximum axial force of turnout by the continuous welded rail are largely subordinated to the maximum resistance of heel joint and the fitting devices than the ballast resistance. Also it shows that the maximum axial force produced changes a lot according to the characteristics of creep resistance of the fitting part and the ballast resistance.

• PNF and Movement
• /
• v.1 no.1
• /
• pp.27-32
• /
• 2003

Objectives : The purpose of this study was conducted to find change and development of the proprioceptive neuromuscular facilitation(PNF). Methods: This is a literature study with books, seminar and book for the international courses. Results: Combination of isotonic has been started by Mr and Mrs Johnson after Miss Knott passed away. It is that the terms of maximum resistance changed into optimal or appropriate resistance. It is focus on activities. Maximum resistance focus not only activities but also irradiation have to fit with normal functions. PNF has enough for the motor control concepts and international classification of functioning(ICF)of WHO. Conclusions: PNF has changed and developed with giving resistance method. It is that changed from maximal resistance to optimal resistance. But it is smaller concept than maximum resistance. Even though PNF founded 60 years ago, it is enough for new concepts that is motor control and learning.

• Korean journal of applied entomology
• /
• v.32 no.4
• /
• pp.373-381
• /
• 1993

Resistance evolution to organophosphate-based pesticides in apple and pear inhabiting arthropods of western North America extends to many classes of pest and some beneficial species. Resistance management programs to minimize resistance in pests while exploiting it in natural enemies have met with mixed success. Among beneficials, resistances have been exploited mostly among predators of pest mites. Evolution of resistant mites, leafminers, leafhopper, aphids, leafrollers and some internal fruit feeders have led to development of new monitoring methods and means to delay or avoid resistance. But it is resistance to azinphosmethyl in codling moth (Cydia pomonella) that is changing the pest control system and moving it from chemical to biologically-based means. Newly merging IPM system will depend more on use of biological, cultural, behavior and genetic controls. But more selective pesticides also will be needed to augment pheromones, resistant host plants and genetically altered organisms. These more biologically-based tactics will be prone to resistance evolution in pests as well, if used too unilaterally and/or too extensively.

• Journal of the Korean Society of Safety
• /
• v.33 no.6
• /
• pp.22-27
• /
• 2018

Fire fighters are exposed to the risk of many accidents during fire suppression, especially near the high voltage circuit. In order to prevent and analyze the electric shock accidents, measurement of water resistance is crucial. However, this has been one of the overlooked research areas and it has been very difficult to measure the mixed up resistance components separately. In this paper, we measured a total resistance of apparatus and regarded it as a serial resistance of contact resistance and length dependant resistance. Measuring the resistance by varying the length of water stream, the variable resistance and fixed contact resistance appear, which are used to calculate the both components of resistances. In addition, the resistance of fire hose can be calculated from the parallel circuit which is formed by grounding the fire hose with the resistance of water stream. Results show that we can successfully measure the resistance per unit length of water stream and fire hose, thereby proving that this method is a facile way to measure water and fire hose resistance. However, many experiments are still required to obtain the precise contact resistance of ground under various condition and the resistance between the human body and fire hose.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.39 no.1
• /
• pp.121-132
• /
• 2015

All aspects of clothing, including color, are a visible form of expression that carries invisible value. The purpose of this work is to study the expression of resistance in the white Hanbok in modern culture, specifically after the 1980s. Koreans have traditionally revered white color and enjoyed wearing white clothes. In Korea, white represents simplicity, asceticism, sadness, resistance against corruption, and the pursuit of innocence. This paper looks at: (i) the universal and traditional values of the color white, (ii) the significance of traditional white Korean clothing, (iii) the resistance characteristics of white in traditional Korean clothes, and (iv) the aesthetic values of white Hanbok. The white Hanbok often connotes resistance when it is worn in modern Korea. It is worn in folk plays, worn by shamans as a shamanist costume, worn by protestors for anti-establishment movements, and worn by social activists or progressive politicians. The fact that the white Hanbok has lost its position as an everyday dress in South Korea (instead symbolizing resistance when it is worn) is an unusual phenomenon. It shows that the white Hanbok, as a type of costume, is being used as a strong means of expression, following a change in the value of traditional costumes as it take on an expressive function.

• Journal of Information Technology Services
• /
• v.18 no.2
• /
• pp.97-121
• /
• 2019

In this paper, factors affecting intra-organizational diffusion of Big Data systems from the perspective of the Big Data system vendors have been analyzed. In particular, the theory of resistance against innovation that exists in some form before the adoption or rejection of innovation has been focused on. In order to do that, the resistance has been divided into three categories : postponement, rejection and opposition. The variables affecting each type are also divided into four independent variables : perceived risk, innovation characteristics, user attributes, and organizational attributes. As a result of the survey, it was confirmed that the influences of each variable are different according to the type of resistance. As the strength of the resistance was increased, the influence of the trialability was increased as well. As the strength of the resistance was decreased, the satisfaction with the existing system became more influential on the resistance. The time risk and the satisfaction with the existing system were found to affect all types of resistance. From the vendor's point of view, strategic implications are presented in terms of marketing or system development for diffusion, depending on the degree of resistance of the adopter.