• Journal of the Korean Institute of Gas
• /
• v.12 no.2
• /
• pp.69-76
• /
• 2008

Three failure cases of CNG composite vessels were reported since after January 2005. The 1st and 2nd accidents were indebted to vessel defect and installation mistake. The 3rd was caused by gas leak at pipe connections. In this paper various aspects were studied based on information of the three failure analysis, which must be improved for better safety of the CNG bus system. Overpressure region caused by vessel explosion was theoretically predicted and also assessed by PHAST program. Explosion of 120 l vessel under 20 MPa is equivalent to 1.2 kg TNT explosion. The predicted value by PHAST was more serious than theoretical one. However, actual consequence of explosion was much less than both of the predicted consequences. Since the CNG vessel was designed by the performance based design methodology, it is difficult to verify whether the required process and tests were properly conducted or not after production. If material toughness is not enough, the vessel should be weak in brittle fracture at early in the morning of winter season since the metal temperature can be lower than the transition temperature. If autofrettage pressure is not correct, fatigue failure due to tensile stress during repeated charging is possible. One positive aspect is that fire did not ocurred after vessel failure. This may be indebted to fast diffusion of natural gas which hindered starting fire.

• Journal of Soil and Groundwater Environment
• /
• v.9 no.4
• /
• pp.24-31
• /
• 2004

A cold mix asphalt (CMA) treatment process was proposed as a tool to recycle soils contaminated with petroleum hydrocarbons. Experimental studies were conducted to characterize performances of the CMA process in treating soils contaminated with diesel or diesel compounds. From the screening experiments, it was found that performances of five types of asphalt emulsions that contained a cationic or an anionic or a nonionic surfactant were not substantially different. In consideration of higher affinity for soils and higher sorption coefficients obtained, an emulsion containing Lauryl Dimethyl Benzyl Ammonium Chloride (LDBAC) was selected as a promising asphalt emulsion for treating diesel-contaminated soils. When the asphalt emulsion LDBAC was applied to treat three compounds that originated from diesel, the removal efficiencies obtained in the order of decreasing efficiencies were as follows: docosane > pentadecane > undecane. Leaching experiments on the specimen formulated by the emulsion LDBAC found that the selected treatment method could treat soils with diesel concentrations as high as 10,000 mg/kg. Leaching of the diesel from the specimen was controlled by diffusion for the first four days and then leaching rate diminished substantially. The latter behavior was characterized as depletion, which represents that the contaminant released amounts to more than $50\%$ of the total amount of the contaminant that can be leached. The amounts of three diesel compounds leached from the specimen in the order of decreasing amount were undecane, pentadecane, and docosane. The curing of the soil contaminated with pentadecane was relatively slow.

• Journal of Technology Innovation
• /
• v.17 no.2
• /
• pp.25-53
• /
• 2009

The purpose of this paper is to analysis sectoral patterns of technological innovation in Korean manufacturing sector. Pavitt(1984) put forward a well-known taxonomy that industries three groups of industries characterized by markedly different innovative modes, namely science-based, production-intensive and supplier-dominated industries. Using Pavitt's taxonomy as a framework, we try to explain similarities and differences among sectors in the sources and impact of innovations. Based on a sample of 2,371 firms in manufacturing industry, this paper investigated its relevance to explain the sources and directions of innovative activities in Korean industries. Empirical study shows that in supplier dominated firms most process innovations come from suppliers of equipment and materials. In science-based firms product innovation is produced internally, based on the rapid development of the underlying sciences in the universities and research institutes. It also shows that production-intensive firms have a positive association between innovativeness and customer collaboration. This explanation has implications for our understanding of the sources and directions of technical changes, the formation of technological advantages at the level of both region and country.

• Research in Plant Disease
• /
• v.12 no.2
• /
• pp.144-147
• /
• 2006

Egg yolk immunoglobulin (IgY) is much widely used in medical fields, but its use in serology of plant viruses is much limited. We produced an IgY against pepper mild mottle virus (PMMoV) and applied it to several serological tests. Polyclonal antibodies were obtained from the egg yolk of chicken immunized with a total of 2mg of purified PMMoV over 2 months. The titers of antibodies were measured with the ring-test over six months after the first injection. The highest.titers of IgY was 1/2,560 at 2 months after the first injection. Approximately 60-80 mg of IgY were obtained from one egg yolk. Using the IgY, 1ng/ml of purified PMMoV was detected with the indirect ELISA. Gelrite gel double diffusion test, ELISA and tissue immuno-binding assay employing IgY gave similar sensitivity and specificity to those of IgG developed in rabbit. Therefore, the IgY which can be obtained in large quantities from a chicken, might be useful for the antibody production and the serology of plant viruses.

• Journal of Life Science
• /
• v.26 no.2
• /
• pp.220-225
• /
• 2016

Coagulase-negative staphylococci (CNS) have recently become the bacteria most frequently found in clinical infections. The aim of this study was to investigate the prevalence, antimicrobial susceptibilities, and molecular characteristics of CNS isolates from dental clinic environments in Busan, Korea. One hundred and fifty-four samples were collected from 10 dental clinics and dental hospitals in Busan from December 2014 to January 2015. Species were identified by matrix-assisted laser desorption/ionization–time-of-flight. Antimicrobial susceptibility was determined by disk diffusion methods. A polymerase chain reaction was performed to detect mecA, mupA gene, and SCCmec types. Of the 154 samples, 10(6.5%) isolates were identified as CNS (5 Staphylococcus epidermidis, 2 Staphylococcus capitis, 2 Staphylococcus, and 1 Staphylococcus haemolyticus). Among the 10 isolates, 6 were resistant to penicillin, 5 were resistant to gentamicin, 3 were resistant to tetracycline, and 2 were resistant to cefoxitin and erythromycin. However, clindamycin, ciprofloxacin, teicoplanin, and trimethoprim-sulfamethoxazole resistant isolates were not present. Genes encoding mecA were detected in 4 (2 S. warneri and 2 S. haemolyticus) isolates, and mupA in 1 (S. epidermidis) isolate. One methicillin-resistant CNS (S. warneri) isolate was determined as being of the SCCmec type I. It is concluded that CNS resistant to various antimicrobial agents was widely distributed in dental clinic environments in Korea.

• The Korean Journal of Food And Nutrition
• /
• v.16 no.1
• /
• pp.29-34
• /
• 2003

Prunus mume has been used for the folk medicine by many old civilizations to treat food-borne diseases or enteric disorders. This study was carried out to examine the antimicrobial effect of juice from Prunus mume against pathogens such as Escherichia coli, Salmonella enteritidis, Staphylococcus aureus, Listeria monocytogenes and Bacillus cereus. The juice of Prunus mume had the strongest antimicrobial activity to Sal. enteritidis. The concentrations of Prunus mume juice for the formation of clear zone were 1% for Sai. enteritidis(15.0mm), 3% for Lis. monocytogenes(14.7mm), and 5% for Bac. cereus(14.75mm), Esc. coli(13.45mm) and Sta. aureux(11.9mm). The growth of all tested microorganisms was inhibited apparently in tryptic soy broth containing 3% and 4% Prunus mume juice. And it was found that the Prunus mume juice showed the highest antimicrobial properties, followed by Sal. enteritidis, Bac. cereus, Sta. aureus, Lis. monocytogenes, Esc. coli.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.9
• /
• pp.211-216
• /
• 2016

Worldwide casualties caused by earthquakes, floods, fire or other disaster has been increasing. So many researchers are being actively done technical studies to ensure golden-time. In this paper if a disaster occurs, use the IoT technologies in order to secure golden-time and transmits the message after to find the user of the accident area first. When the previous job is finished, gradually finds a user of the surrounding area and transmits the message. For national emergency information, OPEN API of Korea Meteorological Administration was used. To collect detailed information on a relevant area in real time, this study established the system that connects and integrates Crowd Sensing technology with BLE (Bluetooth Low Energy) Beacon technology. Up to now, the CBS based on base station has been applied. However, this study designed and mapped DB in the integration of Beacon based user positioning and national administrative address system in order to estimate local users. In this experiment, the accuracy and speed of information dif6fusion algorithm were measured with a rise in the number of users. The experiments were conducted in a manner that increases the number of users by one thousand and was measured the accuracy and speed of the message spread transfer algorithm. Finally, became operational in less than one second in 20,000 users, it was confirmed that the notification message is sent.

• Korean Journal of Metals and Materials
• /
• v.50 no.3
• /
• pp.256-262
• /
• 2012

This study investigated the hydrogen storage properties of Zr-Based $AB_{2-x}M_x$ metal hybride made by HCS (Hydriding Combustion Synthesis). The materials were prepared by HCS 80 wt% $AB_2$-15 wt% Mg-5 wt% Mm, HCS 80 wt% $AB_2$-20 wt% Mg and pure Zr-Based $AB_2$, These materials were activated at 298 K under 20 bar. Both HCS 80 wt% $AB_2$-20 wt% Mg and HCS 80 wt% $AB_2$-15 wt% Mg-5 wt% Mm were absorbed within 1 minute. In the case of the $AB_2$, it was perfectly absorbed within 6 minutes. Then, the materials were evaluated to obtain P-C-T (Pressure-Composition-Temperature) curves at 298K. As a result, the hydrogen storage capacity of HCS 80 wt% $AB_2$-20 wt% Mg, HCS 80 wt% $AB_2$-15 wt% Mg-5 wt% Mm and pure Zr-Based $AB_2$ were determined to be 1.2, 1.6 and 1.74 wt%, respectively. The activation energy and rate controlling step were calculated by the Johnson-Mehl Avrami equation. The activation energies of HCS 80 wt% $AB_2$-20 wt% Mg, HCS 80 wt% $AB_2$-15 wt% Mg-5 wt% Mm and pure Zr-Based $AB_2$ were 26.91, 20.45, and 60.41 kJ/mol, respectively. Also, the values of ${\eta}$ in the Johnson-Mehl Avrami equation for HCS 80 wt% $AB_2$-20 wt% Mg, HCS 80 wt% $AB_2$-15 wt% Mg-5 wt% Mm and pure Zr-Based $AB_2$ are 0.60, 0.51, and 0.44. So, the rate controlling steps which indicate hydrogen storage mechanism are an one dimensional diffusion process.

• Korean Journal of Social Welfare Studies
• /
• no.39
• /
• pp.365-393
• /
• 2008

This research examnied the roles, the strategies and the influence of labor unions on the pension reform. In Italia labor unions were important actors in pension reform politics during 1990s, but in 2004 labor union was excluded from the pension reform. This difference is not only related with diffusion of the leftist party but also the experience of pension benefit retrenchment of the pension reform in 1995 in which labor unions had initiatives. Labor unions choose their strategies, social dialogue or mass struggle, depending on the attitudes of government. After change of government following the failure of the pension reform in 1994 Italian government tried social dialogue. In Dini reform in 1995, laborunions had initiative in making pension reform plan. Labor unions obtained member's approval using membership vote. It had repressed opposition from militant sectors effectively. However Labor unions concentrated on the issues of transition measures and protecting vested rights in seniority pension ignoring problems of contribution evasion of small-firm workers and benefit adequacy of young workers. Even when labor unions leaded social concertation processes and pursued union democracy, labor unions' influences on the pension reform had fundamental limitations.

• Review of Culture and Economy
• /
• v.17 no.2
• /
• pp.185-216
• /
• 2014

It has been two years since the national certificate of Arts & Culture Education Instructor(ACEI) was implemented the 2012 amendment to the Arts & Culture Education Act. Separate from the initial policy goals, students who attend the program to achieve ACEI certificate share various expectations, motivations and intents. The purpose of the research is to understand the collective identity of future ACEIs to evaluate the initial policy implementation during the period when the collective professional identity has not been fully formed yet. This research studies the data that were collected from 172 students who were attending one of the official ACEI institutes in Seoul area. As one of qualitative research methods, Questionnaire Method was employed to conduct this phenomenological study. James E Marcia's theory provides the theoretical framework for the data analysis of this study. The research results indicate that many students'identity status are between Identity Diffusion and Moratorium, which raises concerns for both arts and cultural fields as well as the policy success. Therefore, this research will relate these findings to the larger arts and culture infrastructure in order to better prepare them as arts and cultural professionals and also to stress the importance of the job market development and social environment that can accept them.