• 대한정형도수물리치료학회지
• /
• 제22권2호
• /
• pp.21-27
• /
• 2016

Purpose: The system of clinical education program of Korean academic of orthopedic manual physical therapy (KAOMPT) was changed in 2014. The purpose of this study was to compare the level of satisfaction of clinical education program in KAOMPT before and after the new program. Methods: The subjects of this study were consisted of the physical therapist who participated the education program of KAOMPT from 2013 to 2015. 7687 structured questionnaires were divided in the courses and analysed. Results: There were significant differences of level of satisfaction of introduction course (p<.05), cervico-thoracic course (p<.001), lumbo-sacral course (p<.001), upper extremity course (p<.001), lower extremity course (p<.001), and advance course (p<.001) for three years. The satisfaction of introduction course was decreased in 2014 than 2013, but it was restored in 2015. The satisfaction of cervico-thoracic course was decreased in 2014 than 2013, but it was increased in 2015 than in 2013. The satisfaction of lumbo-sacral course in 2014 was decreased than in 2013, but it was restored in 2015. The satisfaction of upper extremity course in 2014 was increased than in 2013, but it became same level with 2013 in 2015. The satisfaction of lower extremity course in 2014 was increased than in 2013, and it was maintained same level in 2015. The satisfaction of advance course in 2014 was decreased than in 2013, and it is maintained same level in 2015. Conclusions: The level of satisfaction of clinical education program was decreased in 2014, but it became same or higher level with 2013 in 2015. It is assumed that the new clinical education program of KAOMPT was established completely in 2015.

• 한국농촌건축학회논문집
• /
• 제8권2호
• /
• pp.19-26
• /
• 2006

This study is purposed to a ripple effects of development of a golf course in rural area analyzed to site suitability, social impact of public opinions, and economical impact. And for study, it is setting up development model of gamaksan golf course in geochang-gun will be constructed. It is carried out those as follows;(1) it is, first of all, examined site suitability considering act and site factors, opinion of residence's, and development planning of geochang-gun;(2) it is, secondly, suggested to analyzed social-economic impacts in rual area;(3) it is, finally, established an alternative proposal for development of a golf course considering it's merits and faults. The result of study, A appropriateness of development planning in golf course is focused to 'regional planning integrated', 'educational program for It's', and 'development council committee' considering harmony of a specialist, residents, government employee, businessman for a identity of interests.

• 한국IT서비스학회지
• /
• 제20권6호
• /
• pp.125-139
• /
• 2021

To explore college students' course satisfaction over the course of the semester during which a full-scale digital transformation was in progress due to COVID-19 pandemic, this study analyzed student survey data from a university located in the metropolitan area. To minimize the respondents' burden to answer long list of detailed questions in repetition, the study utilized a pulse survey method and students were asked to answer a brief and regular set of online questions 5 times throughout the semester. The number of survey respondents ranged from 1,640 to 4,116, with an average of more than 3,700. The main results and implications of this study are summarized as follows. First, the survey data indicated that the overall student satisfaction with online courses was above average (3.46/5). Vast majority of students have chosen pre-recorded, contents-based course over real-time, video-based course as their preferred course delivery method and this tendency remained the same throughout the semester. Second, the results of keyword network analysis of open-ended questions indicated that technical issues, increased workload (e.g., course assignments and course attendance) were main causes of online course dissatisfaction. And students suggested an unified online course platform and more interactive course design to further improve online courses in the future.

• 디지털산업정보학회논문지
• /
• 제15권4호
• /
• pp.117-129
• /
• 2019

This study aims to explore a plan for the educational application of K-MOOC brought into relief as a new education system and to draw a direction of improvement for increasing learners' satisfaction through the development and operation of the K-MOOC Course. The colleges produce and provide the MOOC Course as a counterplan through college innovation to respond to social changes due to the reduction of school-age population. Thus, this study selected the target courses for the operation of K-MOOC and proceeded with the development of a course, referring to the guidelines for the development and operation of the K-MOOC Course at the National Institute for Lifelong Education with the quantity for 14 weeks (About 50 minutes per week) for the period of the development of the course of about 5 months. The development of the course was made in the stages of design, development, inspection, and operation. The implications of the operation of K-MOOC obtained through this study are as follows: First, in order to increase the utilization of the MOOC Course, it is necessary to operate it in connection with the regular curriculum; second, it is necessary to have desirable communication to induce the interaction and academic motivation between the instructor and the learners; and third, it is necessary to analyze the relationship of the impact by each background factor through analyzing satisfaction with the lecture and continue to assure the quality of the course through understanding the learners' demands. For this purpose, it is important to experience new attempts directly and analyze the performance of education and the satisfaction of consumers and the instructor in detail, and it is necessary to construct a curriculum suitable for K-MOOC and seek an effective teaching method.

• 대한조선학회논문집
• /
• 제47권3호
• /
• pp.462-468
• /
• 2010

A new course keeping controller for RIB(Rigid Inflatable Boat)-type USV(Unmanned Surface Vehicle) is developed using pilot's steering pattern. A pilot's simple steering pattern is found out from various course change tests. It is used to course keeping algorithm, suitable for large course change more than 60 degrees. To validate the course keeping controller, sea trial tests are conducted. From sea trial test, new course keeping controller shows good performance with less overshoot, maximum roll angle less than $20^{\circ}$, which makes it possible that fast course changes without slip motion of USV.

• 한국IT서비스학회지
• /
• 제21권3호
• /
• pp.73-87
• /
• 2022

As the COVID-19 pandemic continues to prolong, non face-to-face, online classes has become the new normal in education. To examine the effect of course types and course delivery modes on student course satisfaction, the study analyzed survey data collected from 2,743 students enrolled in a 4-year university located in a metropolitan area. Basic Frequency analysis as well as keyword network analysis were used to analyze student survey data. The main results and implications of the study are as follows. First, the survey results indicated that students preferred asynchronous classes over synchronous online classes. This tendency was consistent regardless of student grades and majors as well as the course type. However, students majoring in more practice-oriented disciplines tend to prefer synchronous online classes and blended classes, and this tendency gets stronger with courses in major. Second, the keyword network analysis results further indicated that interactivity may play an important role in both synchronous and asynchronous online course satisfaction.

• 한국컴퓨터정보학회논문지
• /
• 제24권4호
• /
• pp.27-34
• /
• 2019

The course timetabling problem is a kind of very complex combinatorial optimization problems, which is known as an NP-complete problem. Sometimes a given course timetabling problem can be accompanied by many constraints. At this time, even if only one constraint is violated, it can be an infeasible timetable. Therefore, it is very difficult to make an automated course timetabling system for a complex real-world course timetabling problem. This paper introduces an automated course timetabling system using constraint programming. The target problem has 26 constraints in total, and they are expressed as 24 constraints and an objective function in constraint programming. Currently, we are making a timetable through this system and applying the result to the actual class. Members' satisfaction is also much higher than manual results. We expect this paper can be a guide for making an automated course timetabling system.

• Educational Technology International
• /
• 제22권2호
• /
• pp.255-283
• /
• 2021

In the early 2020, COVID-19 changed the traditional way of teaching and learning. This paper aimed to explore the impact of college students' perception of course quality on their online learning satisfaction. A total of 4,812 valid samples were extracted, and the difference analysis and hierarchical regression analysis were used to make an empirical analysis of college students' online learning satisfaction. The research results were as follows. Firstly, there was no difference in online learning satisfaction among students by gender and grade. Secondly, learning assessment, course materials, course activities and learner interaction, and course production had a significant positive impact on online learning satisfaction. Course overview and course objectives had an insignificant correlation with online learning satisfaction. Thirdly, the total effect of online learning satisfaction was as follows. Course production had the greatest effect, followed by course activities and student-student interactions, followed by course materials. It was the learning evaluation that showed the least effect. This study can provide empirical reference for college teachers on how to continuously improve online teaching and increase students' satisfaction with online learning.

• 한국의류산업학회지
• /
• 제17권4호
• /
• pp.513-523
• /
• 2015

The purpose of this study is to develop house caddie uniforms design which reflects the CI and image of 'Golfzon County Sunwoon', a representative golf course in the Honam circle, to enhance a positive image of a golf course and improve house caddies' service quality and their working efficiency. Study methods were as follows. In literature review, the domestic golf industry, golf culture, and house caddie uniforms as one of golf course CI elements were investigated. In empirical study, the formativeness of domestic golf course CI and house caddie uniforms was analyzed. Then, house caddie uniforms were developed using CI which is the symbolic element of a golf course. A concept for uniforms design development was 'Golf & Culture Communication' to symbolically represent an image of IT-based total golf culture club. It was limited to female uniforms design for spring or autumn that is high in application. A symbol and a logo which are symbolic elements of a golf course were freely worn in the form of a brooch. Symbolism and practicality were reinforced using PB(v), R(v), YR(v), and Y(vp) colors only for a golf course. Functionality was improved by using UV protection materials and aesthetics was expressed by reflecting 2014-15 F/W trends.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 A
• /
• pp.41-43
• /
• 2001

This paper presents a Web-based educational tool for Power System Engineering, especially for power engineers. This tool has Web-oriented educational courses for power system education. The Web-based learning has become more popular year by year in the various fields[1-2]. The proposed educational tool provides some courses such as power system introduction Course, KEPCO's system introduction Course, Power system devices Course, Power Flow Course, OPF Course, ELD Course, Stability Analysis Course, Fault analysis Course, Voltage & Frequency control Course, and power system planning & operation Course. Finally, it will be scheduled to install for the education tool of the power system engineering for KEPS[3].