• Economic and Environmental Geology
• /
• v.29 no.3
• /
• pp.293-304
• /
• 1996

The Wolchul Mt. area is composed of a biotite granite and a pink feldspar granite. These granites are distinctly different in terms of their field occurrence, mineralogy, trace element and REE composition, as well as their isotope ages. The biotite granite has higher ferromagnesian elements and lower lithophile trace element abundances than the pink feldspar granite. The biotite granite has high Sr and Ba while the pink feldspar granite has high Rb. On the Rb-Sr-Ba diagram the biotite granite plots as a granodiorite while the pink feldspar granite belongs to a strongly differentiated granite. The ${\Sigma}$ LREE/ ${\Sigma}$ REE for the biotite granite is 0.95 and for the pink feldspar granite it is 0.88. The ratio shows a steep decrese in LREE while HREE is essentially constant. Based on the Eu/Sm, $[La/Lu]_{cN}$ and low Eu(-), the biotite granite has quartz diorite to granodiorite composition while the pink feldspar granite, with a relatively high Eu(-) anomaly, falls into the monzo- to syenogranite classification. The silica vs. trace element diagrams for the two granites indicate that the biotite granite could have formed near to a continental margin or volcanic island setting environment while the pink feldspar granite formed within a continental plate or as result of plate collision. The biotite granite has a U-Pb zircon age of 175 Ma, i.e. Middle Jurassic. The pink feldspar granite is younger, it has a K-Ar orthoclase age $93.6{\pm}1.5$ Ma which is Late Cretaceous age.

• Structural Engineering and Mechanics
• /
• v.78 no.4
• /
• pp.473-484
• /
• 2021

Similar to other structures, ultimate strength values showing the maximum load that the structure can resist without damaging has great importance on ships. Therefore, increasing the ultimate strength values will be an important benefit for the structure. Low carbon steels used in ships due to their low cost and good weldability. Improving the ultimate strength values without interfering with the chemical composition to prevent of the weldability properties of these steels would be very beneficial for ships. Grain refinement via severe plastic deformation (SPD) is an essential strengthening mechanism without changing the chemical composition of metallic materials. Among SPD methods, equal channel angular pressing (ECAP) is one of the most commonly used one due to its capacity for achieving bulk ultrafine-grained (UFG) materials. When the literature is examined, it is seen that there is no study about ultimate strength calculation in ships after ECAP. Therefore, the mean purpose of this study is to apply ECAP to a shipbuilding low carbon steel to be able to achieve mechanical properties and investigate the alteration of ship hull girder grillage system's ultimate strength via finite element analysis approach. A fine-grained (FG) microstructure with a mean grain size of 6 ㎛ (initial grain size was 25 ㎛) was after ECAP. This microstructural evolution brought about a considerable increase in strength values. Both yield and tensile strength values increased from 280 MPa and 425 MPa to about 420 MPa and 785 MPa, respectively. This improvement in the strength values reflected a finite element method to determine the ultimate strength of ship hull girder grillage system. As a result of calculations, it was reached significantly higher ultimate strength values (237,876 MPa) compared the non-processed situation (192,986 MPa) on ship hull girder grillage system.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2007.05a
• /
• pp.67-70
• /
• 2007

The meaning of the space planning which has from modern interior space has played important role, space composition planning itself is the concept creation tool as well as the unique expression sphere in field of interior space far away from fixed idea relevant to the existing space which was only simple division or secondary element in design. Thus, this current work expresses that the space-Function is related with space-division as well as basic designed-conceptual work process including the space is formed. Furthermore, through the side-composition with form, it activates the various space aspect perceptually, which created the visual environment in using lightning, reflection of glass and penetrated nature etc. The keyword on elevation design concept is as like various aspects, third dimension, non-materiality and symbolical meaning. In addition, it provides the color space equipped with functionality and artistry capable to arouse the diverse sensual capacity to space users on default of image language.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.8 s.239
• /
• pp.1132-1138
• /
• 2005

Fatigue life of metal material can be predicted by the use of fracture theory and experimental database. Although prediction of fatigue life of rubber material uses the same way as metal, there are many reasons to make it almost impossible. One of the reasons is that there is not currently used fracture criteria for rubber material beacuse of non-standardization, various way of composition process of rubber and so on. Tearing energy is one of the fracture criteria which can be applied to a rubber. Even if tearing energy relaxes the restriction of rubber composition, it is also not currently used because of complication to apply in. Research material about failure process of rubber and tearing energy was reviewed to define the process of fatigue failure and the applicability of tearing energy in estimation of fatigue life for rubber. Also, 1file element formulation of tearing energy which can be used in FE analysis was developed.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1996.09a
• /
• pp.111-116
• /
• 1996

To realize the RF layer of Rubber Ferrite-Air-Solid Ferrite(RF-A-F) that proposed by Y.Naito it is tried to grasp the formulation of composition by varying the ratio of mole and element of Complex Isotropic Ferrite Nix-A0.1-Zn(1-x-0.1)*Fe2O4 As a result it was found that the characteristics of the electromagnetic wave absorber constructed by the selected formulation of compositionin in RF-A-F type were improved.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.9
• /
• pp.109-117
• /
• 2019

Since 'Hanok Expanse Support' has been started in Seoul, its target was expanded from renovation to new construction and from 'Hanok District' to all area in Seoul. The newly built hanok with Hanok Expanse Support had to follow the standards about the form of the hanok and adapt to modern lifestyle. However, the newly built hanok were planned with 'kan' since it retained the traditional wooden structure. So their composition of kan were considered to be influenced by the standards of each district and modern lifestyle. Therefore the aim of this study is to understand the architectural characteristics of newly built hanok in Seoul since 2000 focusing on the kan composition. Because of the differences in site conditions and the district unit plan, newly built hanok in Hanok District have more limited changes than Other District. However, kan is composed variously in horizontal and vertical ways to make the most space according to site conditions and most of the newly built hanok have opened courtyard rather than closed courtyard layout. With kan composition in various directions and kan added under the eaves, kan is highlighted in form. On the other hand, the composition of kan as an interior spatial element has changed and weakened because the lifestyle has changed compared to the traditional hanok and the 20th century urban hanok. Also the regular kan composition of Mom-chae and Nalgae-chae has changed. And kan is divided regardless to the wooden structure. Also, with the added kan under the eaves the main kan is dismantled inside. This paper indicates that although there is an undeniable premise that the case is restricted to hanok received Hanok Expanse Support on the condition of following the standards of the form of hanok, it is a part of the transitional changes that hanok is experiencing.

• Korean Institute of Interior Design Journal
• /
• v.13 no.2
• /
• pp.29-37
• /
• 2004

This study analyze the architectural space in the aspect of the 'Raumplan' and 'Plan Libre'. These concepts based on the 'Raumplan versus Plan Libre' exhibition in Delft University, Netherlands. It is generally agreed that the concept of 'Plan Libre' in connection with Le Corbusie architecture and 'Raumplan' related to Adolf Loos's works. that exhibition contents was focused an extent of modem architecture. But, These concepts continually influence contemporary architecture and offer diverse vision in architecture. Therefore, this study focused on the analysis that look for common element in the space through the case study and space element connection in change of the values, technical growth. This Paper reveals that Adolf Loos's Raumplan is similar to Louis I. Kahn's 'Room' concept and Ando Tadao's centrifugal space composition method In the dwelling architecture. And the concept 'Plan Libre': non-definitive formal system and the elements : column, free form screening wall is revived as formal application of 3 dimension composition in architecture. and transfer lots, void, and linear space in Rem Koolhaas's urban design projects. These aspects is so called topology. This topological concept is an attempt in view of the space connection state rather than formative viewpoint.

• Steel and Composite Structures
• /
• v.17 no.3
• /
• pp.237-252
• /
• 2014

The use of composite structures is increasingly present in civil building works. Composite Box Girder Bridges (CBGB), particularly, are study of effect of shear connector's numbers and distribution on the behavior of CBGBs is submitted. A Predicti structures consisting of two materials, both connected by metal devices known as shear connectors. The main functions of these connectors are to allow for the joint behavior of the girder-deck, to restrict longitudinal slipping and uplifting at the element's interface and to take shear forces. This paper presents 3D numerical models of CBGBs to simulate their actual structural behavior, with emphasis on the girder-deck interface. Additionally, a Prediction of several FE models is assessed against the results acquired from a field test. A number of factors are considered, and confirmed through experiments, especially full shear connections, which are obviously essential in composite box girder. A good representation for shear connectors by suitable element type is considered. Numerical predictions of vertical displacements at critical sections fit fairly well with those evaluated experimentally. The agreement between the FE models and the experimental models show that the FE model can aid engineers in design practices of box girder bridges. Preliminary results indicate that number of shear studs can be significantly reduced to facilitate adoption of a new arrangement in modeling CBGBs with full composition. However, a further feasibility study to investigate the practical and economic aspects of such a remedy is recommended, and it may represent partial composition in such modeling.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.379-382
• /
• 2004

In this paper, it is investigated in advance about the PZT-based composition for piezoelectric vibration device. The specimens of piezoelectric ceramics are made of Columbite method. The piezoelectric vibration device by this composition is designed by ATILA(Magsoft) program used FEM(Finite Element Method). The vibration device used for mobile phone must be driven in the frequency of $130{\sim}200Hz$, so the resonant frequency of piezoelectricity must adjust driven frequency bandwidth. The result of analysis by ATILA is appeared dependant property of length, width, thickness and dummy weight about resonant frequency of the piezoelectric vibration device. The size of manufactured actuator is $28{\times}12{\times}0.3mm^3(length {\times}width{\times}thickness)$ and this is bimorph type. The test of manufactured piezoelectric vibration device measure displacement, acceleration and power dissipation. The piezoelectric vibration device has the advantage more than electro-magnetic motor, however the size of manufactured device is larger than electro-magnetic motor.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.10a
• /
• pp.443-452
• /
• 2005

The compaction pile methods with low replacement area ratio used sand(SCP) or gravel(GCP) has been usually applied to improvement of soft clay deposits. In order to design accurately compaction pile method with low replacement area ratio, it is important to understand the mechanical interaction between sand piles and clays and its mechanism during consolidation process of the composition ground. In this paper, a series of numerical analyses on composition ground improved by SCP and GCP with low replacement area ratio were carried out, in order to investigate the mechanical interaction between sand piles and clays. The applicability of numerical analyses, in which and elasto-viscoplastic consolidation finite element method was applied, could be confirmed comparing with results of a series of model tests on consolidation behaviors of composition ground improved by SCP. And,through the results of the numerical analyses, each mechanical behaviors of compaction piles and clays in the composition ground during consolidation was elucidated, together with stress sharing mechanism between compaction piles and clays.