• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.1811-1814
• /
• 2003

In this paper, a novel watermarking technique is proposed to authenticate the owner-ship of copyright for the digital contents. Using the 2-level DWT(Discrete Wavelet Transform) we divide a specific frequency band into detailed blocks and apply PIM(picture information measure). After the complexity is calculated, the watermark is embedded in only on high complexity areas. Conventional watermarking technique damages to the original image, because it does not consider the feature of the whole area or a specific frequency band. Easily affected by noise and compression, it is difficult to extract the watermark. However, the proposed watermarking technique, considering the complexity of input image, does not damage to the original image Simulation result show that the proposed technique has the robustness of JPEG compression, noise and filtering such as a general signal processing

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.10
• /
• pp.33-38
• /
• 2011

A novel low-power synchronization technique is presented for the local synchronization. Since the proposed technique transmits an enable signal instead of a clock signal which consumes large power, it can considerably reduce the power consumption. The source-synchronization scheme which is widely adopted for the local synchronization is compared with the proposed technique. It is shown that the proposed low-power synchronization technique provides approximately 50% power saving.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.394-396
• /
• 2007

Radio occultation (RO) technique has been used in planetary science since 1960s. When signal goes through atmosphere, it is refracted due to the gradient of atmospheric refractivity. In 1995, the first low earth orbit (LEO) satellite, MicroLab-1, was launched to conduct RO mission. It receives the signal from global positioning system (GPS) satellites. After MicroLab-1, other RO missions, such as CHAMP, SAC-C, and GRACE, are executed in several years later. In 2006, Taiwan launched six LEO satellites for RO mission. The mission name is Constellation Observing System for Meteorology, Ionosphere and Climate (COSMIC). Under some abnormal situations, multipath and strong fluctuation in phase and amplitude of the signal appear in moist troposphere. Therefore, open loop (OL) technique has been applied to replace traditional phase lock loop (PLL) technique. In this paper, we will summarize the retrieval processing procedure and discuss the advantages and disadvantages of OL technique.

• The Journal of Society for e-Business Studies
• /
• v.7 no.2
• /
• pp.173-190
• /
• 2002

Over the past decade, numerous software managers and engineers have been concerned with measuring the size and complexity of software systems. Function point analysis technique is one of the most popular software sizing techniques. A reasonable software development plan through cost and time estimation should be a prerequisite for the successful project at the beginning stage of the project. It is generally known that software size measurement is useful for this kind of estimation and the function point analysis technique would be more effective than the others. However, it is difficult to apply the technique to object-oriented methodology widely used in the software industry. Thus, the purpose of this study is to present a case study on how to apply function point analysis technique to sizing of the software systems based on UML. The results of this study can be useful to managers and engineers.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.5 no.4
• /
• pp.38-46
• /
• 1996

This paper discusses the feasibility of Ultrasonic Nondestructive Evaluation (UNDE) technique for sport weld quality. Ultrasonic c-scan image assisted by image processing technique was used for Nondestructive Evaluation(NDE) of spot weld quality. Ultrasonic testing results obtained were confirmed and compared by Optical Microscope and SAM(Scanning Acoustic Mircroscope) observation of the spot-weld cross section, The results show that the nugget dinameter can be successfully measured with the accuracy of 0.5mm. It was ascertained that ultrasonic c-scan technique is very effective method for the sake of the approach to the quantitative measurement of nugget diameter and the discrimination of the corona bond from nugget. Additional support for the above conclusions is provided by the results for galvanized steel. The ultrasonic results for galvanized welds generally correspond to the results for uncoated steel. Finally, it was found that the above-mentioned technique can be sufficiently applied to NDE method for securing the Quality Assurance(QA) of spot welded products in production line.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.135-140
• /
• 2005

This paper proposes the technique of load balancing with traffic which is concentrated to MAP on the hierarchical mobile IPv6. This technique sends the secondary MAP address using the extension option of IPv6, so the upper level MAP will manage it. Therefore, when the overload occurs, it distributes the overload to the secondary MAP address by using redirect tunneling technique, so the efficient communication becomes possible. We validate the feasibility and result of the proposed technique by using ns-2 simulator.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.323-326
• /
• 2002

In this paper, we propose a watermarking technique that it is possible to winnow illegal contents from scattered contents on the internet. The identification is performed using an embedded unique content ID by the watermarking technique. The proposed watermarking technique accepts A/D-D/A conversion and a lot of lossy compression such as MP3, AAC, WMA and Real Audio. Watermark robustness is enabled using group quantization, selecting watermark inserting point, and error correction code. Test results show that the correct extraction is about $90\%$ and SNR is above $50\~60dB$. The above figures means that the proposed technique is able to extract encoded information at least one more times per audio and that it is very difficult to discriminate between a watermarked audio and a original audio.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.10
• /
• pp.1944-1949
• /
• 2007

In this paper, a new plane-based computational reconstruction technique for three-dimensional (3D) objects in 3D internal imaging based on a lens model is proposed. For the proposed technique, computational experiments have been carried out for various test images. Resolution of the reconstructed images is analyzed and compared with that obtained by the conventional technique. From experiments, it is shown that the resolution of a 3-D reconstructed image was improved by using the proposed technique.

• The Journal of the Korea Contents Association
• /
• v.17 no.10
• /
• pp.636-646
• /
• 2017

This thesis aims to create a new technique by applying traditional ceramics technique. As a matter of fact, on the toremi plate of the sieve-frame skein technique, the weld on which various patterns are squeezed, is attached to the cylinder made of clay on the spinning wheel. And it is the concept that maximizes aesthetic beauty by expressing distorted pattern and free dismantling of existing pattern by pushing it out from inside by the turn of electric spinning wheel for the first time.The main point of view of this aesthetic source is that most of the surface of the ceramics is a spherical curved surface and looks distorted like an indicator drawn on a globe. The researcher created a dynamic and humorous technique of expression through the free dismantling of the squashed shapes and the distorted patterns and called it the bating sealing weld outer wall extension technique.

• Journal of Korea Game Society
• /
• v.11 no.2
• /
• pp.105-114
• /
• 2011

In a game such as MMORPG, players often see occlusions between primary actors in a shot where shows a close quarter combat. This paper proposes an occlusion resolution technique(MOS) by grafting a medium shot technique and an over-shoulder shot technique to strengthen a confrontation structure. A medium shot technique sets 4 reference points at the up/down/left/right on the sphere of target. An over-shoulder shot technique is a technique of locating the reference points on the side variably. An occluder is replaced with 2 spheres. If a ray is emitted to a reference point from the camera point and intersects a sphere of occluder, it becomes a potential occlusion state. If so, we start to move the camera to the right or left of the occluder, keep moving it while new position of camera is in potential occlusion state, and stop its movement when the occlusion is resolved. Our experiments show that MOS technique consumes operational time of $13.7{\mu}s$ per shot on average, and that it resolves occlusions in 9.26% of ratio on average, and so doesn't have any effect on viewer's sight.