• 제목/요약/키워드: IT Skill Requirement

검색결과 21건 처리시간 0.029초

과학탐구 실험대회의 문제점 분석 (Critical Analyses of '2nd Science Inquiry Experiment Contest')

  • 백성혜
    • 한국과학교육학회지
    • /
    • 제15권2호
    • /
    • pp.173-184
    • /
    • 1995
  • The purpose of this study was to analyse the problems of 'Science Inquiry Experiment Contest(SIEC)' which was one of 8 programs of 'The 2nd Student Science Inquiry Olympic Meet(SSIOM)'. The results and conclusions of this study were as follows: 1. It needs to reconsider the role of practical work within science experiment because practical work skills form one of the mainstays in current science. But the assessment of students' laboratory skills in the contest was made little account of. It is necessary to remind of what it means to be 'good at science'. There are two aspects: knowing and doing. Both are important and, in certain respects, quite distinct. Doing science is more of a craft activity, relying more on craft skill and tacit knowledge than on the conscious application of explicit knowledge. Doing science is also divided into two aspects, 'process' and 'skill' by many science educators. 2. The report's and checklist's assessment items were overlapped. Therefore it was suggested that the checklist assessment items were set limit to the students' acts which can't be found in reports. It is important to identify those activities which produce a permanent assessable product, and those which do not. Skills connected with recording and reporting are likely to produce permanent evidence which can be evaluated after the experiment. Those connected with manipulative skills involving processes are more ephemeral and need to be assessed as they occur. The division of student's experimental skills will contribute to the accurate assess of student's scientific inquiry experimental ability. 3. There was a wide difference among the scores of one participant recorded by three evaluators. This means that there was no concrete discussion among the evaluators before the contest. Despite the items of the checklists were set by preparers of the contest experiments, the concrete discussions before the contest were necessary because students' experimental acts were very diverse. There is a variety of scientific skills. So it is necessary to assess the performance of individual students in a range of skills. But the most of the difficulties in the assessment of skills arise from the interaction between measurement and the use. To overcome the difficulties, not only must the mark needed for each skill be recorded, something which all examination groups obviously need, but also a description of the work that the student did when the skill was assessed must also be given, and not all groups need this. Fuller details must also be available for the purposes of moderation. This is a requirement for all students that there must be provision for samples of any end-product or other tangible form of evidence of candidates' work to be submitted for inspection. This is rather important if one is to be as fair as possible to students because, not only can this work be made available to moderators if necessary, but also it can be used to help in arriving at common standards among several evaluators, and in ensuring consistent standards from one evaluator over the assessment period. This need arises because there are problems associated with assessing different students on the same skill in different activities. 4. Most of the students' reports were assessed intuitively by the evaluators despite the assessment items were established concretely by preparers of the experiment. This result means that the evaluators were new to grasp the essence of the established assessment items of the experiment report and that the students' assessment scores were short of objectivity. Lastly, there are suggestions from the results and the conclusions. The students' experimental acts which were difficult to observe because they occur in a flash and which can be easily imitated should be excluded from the assessment items. Evaluators are likely to miss the time to observe the acts, and the students who are assessed later have more opportunity to practise the skill which is being assessed. It is necessary to be aware of these problems and try to reduce their influence or remove them. The skills and processes analysis has made a very useful checklist for scientific inquiry experiment assessment. But in itself it is of little value. It must be seen alongside the other vital attributes needed in the making of a good scientist, the affective aspects of commitment and confidence, the personal insights which come both through formal and informal learning, and the tacit knowledge that comes through experience, both structured and acquired in play. These four aspects must be continually interacting, in a flexible and individualistic way, throughout the scientific education of students. An increasing ability to be good at science, to be good at doing investigational practical work, will be gained through continually, successively, but often unpredictably, developing more experience, developing more insights, developing more skills, and producing more confidence and commitment.

  • PDF

절차적 시뮬레이션 기법을 적용한 중학교 컴퓨터 교과용 웹 코스웨어 개발 (Development of Web Coursewares for Middle School Computer Subject Applying Procedural Simulation Skill)

  • 이철현;차재혁;안미리;이태욱
    • 컴퓨터교육학회논문지
    • /
    • 제4권2호
    • /
    • pp.1-11
    • /
    • 2001
  • 컴퓨터 교과는 교과의 특성상 실습 중심의 수업이 강조된다. 이러한 실습 수업에 적절히 활용할 수 있는 교수-학습 자료는 열악한 실습 수업 환경을 개선하는 자원의 역할을 한다. 웹 코스웨어는 학습자에게 학습 동기 및 흥미를 유발시키고 자기 주도학습을 통해 학습자의 수준 및 요구에 맞는 학습 활동을 가능하게 하는 교수-학습 자료로 활용될 수 있다. 이와 같은 필요에 따라 본 연구에서는 중학교 컴퓨터 교과용 교수-학습 자료로서 15종의 웹 코스웨어를 개발하였다. 개발된 웹 코스웨어는 수업 적용의 다양성 및 교사의 창의적인 교수-학습 자료 개발 유도를 위해 상이한 설계 방식을 갖는다. 또한, 웹 코스웨어 내용 중 실습 부분은 절차적 시뮬레이션 기법을 적용한 모의 학습의 형태로 구성하였다. 이는 학습자의 개별적인 실습을 가능하게 하여 현재와 같은 일 대 다 지도 방식의 실습 환경을 어느 정도 개선할 것으로 기대한다.

  • PDF

요양보호사의 직무스트레스가 고객지향성에 미치는 영향 - 본인인지건강수준의 조절효과 (The Influence of Job Stress of Care Workers on Customer Orientation -The Moderation Effect of Self-Perceived Health Level-)

  • 이규희;조경원
    • 보건의료산업학회지
    • /
    • 제10권3호
    • /
    • pp.173-184
    • /
    • 2016
  • Objectives : This research analyzed the general characteristics of care workers and verified the correlation among self-perceived health, job stress and customer orientation. Methods : We conducted a survey from May 1st, to May 31st, 2015 of 260 care workers who are affiliated with elderly care facilities or home care facilities in Busan, Korea. Results : The more the workers were stressed about their organizational culture, the more they recognized psychological difficulties. However, there was no correlation between organizational culture and their tendency to be oriented toward customers. It was verified that the recognized psychological health has a positive regulation effect between customer orientation and job stress such as job skill requirement(p<0.01), job autonomy(p<0.01), and organizational culture(p<0.01). Conclusions : Because both suppliers and recipients of care services are aging, it is necessary for elderly care facilities to make a greater effort to minimize the physical and psychological losses of recipients.

원자력발전소(原子力發電所) 가동중(稼動中) 검사(檢査)의 시험분석(試驗分析)을 위한 자동화연구(自動化硏究) (I) (A Study of Automation for Examination Analysis of Inservice Inspection for Nuclear Power Plant (I))

  • 김욱
    • 비파괴검사학회지
    • /
    • 제5권1호
    • /
    • pp.34-47
    • /
    • 1985
  • The developing country, KOREA where does not possess the natural resources for traditional energy such as oil and gas, so. The nuclear energy is the most single reliable source available for closing the energy gap. For these reason, It is inavoidable to construct the nuclear power plant and to develop technology related nuclear energy. The rate of operation in large nuclear power facilities depends upon the performance of work system through design and construction, and also the applied technology. Especially, it is the most important element that safety and reliability in operation of nuclear power plant. In view of this aspects, Nuclear power plant is performed severe examinations during preservice and inservice inspection. This study provide an automation of analysis for volumetric examination which is required to nuclear power plant components. It is composed as follows: I. Introduction II. Inservice Inspection of Nuclear Power Plant ${\ast}$ General Requirement. ${\ast}$ Principle and Methods of Ultrasonic Test. ${\ast}$ Study of Flaw Evaluation and Design of Classifying Formula for Flaws. III. Design of Automation for Flaw Evaluation. IV. An Example V. Conclusion In this theory, It is classifying the flaws, the formula of classifying flaws and the design of automation that is the main important point. As motioned the above, Owing to such as automatic design, more time could be allocated to practical test than that of evaluation of defects, Protecting against subjective bias tester by himself and miscalculation by dint of various process of computation. For the more, adopting this method would be used to more retaining for many test data and comparative evaluating during successive inspection intervals. Inspite of limitation for testing method and required application to test components, it provide useful application to flow evaluation for volumetric examination. Owing to the characteristics of nuclear power plant that is highly skill intensive industry and has huze system, the more notice should be concentrated as follows. Establishing rational operation plan, developing various technology, and making the newly designed system for undeveloped sector.

  • PDF

LiDAR 데이터와 항공사진의 통합을 위한 사각 빌딩의 경계점 설정 (A Study for the Border line Extraction technique of City Spatial Building by LiDAR Data)

  • 연상호;이영욱
    • 한국콘텐츠학회:학술대회논문집
    • /
    • 한국콘텐츠학회 2007년도 추계 종합학술대회 논문집
    • /
    • pp.27-29
    • /
    • 2007
  • 도심지의 공간을 대부분 차지하고 있는 건물의 높이는 지상의 기준점으로 부터의 상대적인 수직거리로 산정하여 3차원의 정보이다. 그러나 지형도의 등고선으로는 알 수 없는 높이이므로 도심지의 스카이 라인이나 건물의 높이 등은 지도에 누락되어 실제적으로 도시계획과 공간 정보를 구축하기 위하여 별도의 측량을 실시하여야 한다. LIDAR는 레이저 스캐너를 항공기에 장착하여 레이저 펄스를 지표면에 주사하고 반사된 레이저 펄스의 도달 시간을 관측함으로써 반사 지점의 공간위치 좌표를 계산해 지표면에 대한 정보를 추출하는 측량기법으로 최근 새로운 지형정보 획득수단으로 부각되고 있다. 이러한 레이저 스캐닝은 센서와 지표면까지의 거리 및 방향을 관측하여 지표면 상의 표고점에 대한 3차원 좌표를 결정한다. 따라서 본 연구에서는 도심공간의 빌딩 및 지형지물에 관한 고밀도의 LiDAR 데이터를 수집하여 건물 중심을 설정하여 건물경계를 추출하여 3차원의 도심 빌딩을 보다 정확하게 생성할 수 있도록 하였다.

  • PDF

u-city를 위한 3차원 공간 영상 도시 모델 생성 및 적용 방안 (3D Spatial Image City Models Generation and Applications for Ubiquitous-City)

  • 연상호;이영대
    • 한국인터넷방송통신학회논문지
    • /
    • 제8권1호
    • /
    • pp.47-52
    • /
    • 2008
  • 3차원 도시환경의 디지털기반의 가시화는 도시계획 및 통신계획, 건설, 건축, 입체적인 도시공간정보시스템 구현, 안전 및 방재 등에서 많은 필요와 그 중요성이 크게 부각되고 있다. 현재 2차원적인 지도정보와 등고선을 이용한 DEM 방식은 3차원 공간을 표현하기에는 많은 한계를 가지고 있다. 최근 레이저와 GPS 측량기술을 이용한 높은 정확도와 보정이 용이한 LiDAR Data로 표고값을 측정하는 연구가 선진국에서 시도되고 있다. 본 연구에서는 해외 선진기술을 도입하여 우리 실정에 적합한 유비쿼터스 입체 도시 건설을 위해 3차원 공간영상 도시모델 생성 기법 및 알고리즘을 개발하여 u-City의 최적 관리를 위한 방안을 제시하고자 한다. 이를 위하여 원격탐사 영상 Data를 중심으로 하는 정사보정하고 이에 매칭할 수 있는 벡터와의 실시간 통합 및 전환으로 U-city에서의 3차원 영상 도시 모델의 생성과 다양한 활용을 제시하였다.

  • PDF

정신질환자의 자살과 의료과오책임 (Negligence liability of hospitals for suicide of patient)

  • 손흥수
    • 의료법학
    • /
    • 제7권2호
    • /
    • pp.9-74
    • /
    • 2006
  • Due to the awareness of their rights for medical liability and the advancement of legal principles, it becomes also not hard to find those who seek damages against hospitals, doctors and nurses for the suicide committed under the protection of psychiatric institute in Korea these days. Judgements on these kinds of cases are not enough yet, so that it may be too early to try to find principles used in these cases, however it is hardly wrong to read following things from above cases. That is, to gain the case, plaintiffs should show (1) there exists an obligation of "due care"(there is a special relation between patients and hospitals), (2) the duty is violated on the basis of the applicable standard of care, (3) whatever injures or damages are sustained are proximately caused by the breach of duty and (4) the plaintiff suffers compensable damages. To specific, whether a psychiatric institute was liable for wrong death or not depends upon the patients conditions, circumstances and the extent of the danger the patients poses to himself or herself; in short, the foreseeability of self-inflicted harm(the doctor should have or could reasonably have foreseen the patient's suicide and the doctor's negligence actually caused the suicide). In this context if a patient exhibit strong suicidal tendencies, constant observation should be required. Negligence has been found not exist, however, when a patient abruptly and unexpectedly dashes from an attendant and jumps out a window or otherwise attempts to injure himself or herself. And the standard of conduct that is required to meet the obligation of "due care" is based on what the "reasonable practitioner" would do in like circumstances. The standard is not one of excellence or superior practice; it only re quires that the physician exercise that degree of skill and care that would be expected of the average qualified practitioner practicing under like circumstances. Most of these principles have been established at cases of the U.S.A and Japan. In this article you can also find the legal organizations of medical liability and medical contacts on the suicide of patients who have psychiatric diseases under Korean negligence law.

  • PDF

철도노선관리에서의 LIDAR 데이터 기반의 3차원 궤적 모델 생성 및 적용 (3D Track Models Generation and Applications Based on LiDAR Data for Railway Route Management)

  • 연상호;이영대
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2007년도 추계학술대회 논문집
    • /
    • pp.1099-1104
    • /
    • 2007
  • 3차원 국토환경의 디지털기반의 가시화는 국토계획 및 통신설비계획, 철도건설, 건축, 입체적인 도시공간정보시스템 구현, 안전 및 방재 등에서 많은 필요와 그 중요성이 크게 부각되고 있다. 현재 국가지리정보 사업으로 완성된 2차원적인 지도정보와 시설정보를 3차원의 도시공간으로 재현하기 위하여 기존의 등고선을 이용한 DEM 방식은 많은 한계를 가지고 있으며, 특히, 철도와 같은 노선 폭이 좁고 길이가 길어서 궤적 관리가 어려운 작은 구조물의 경우에는 그 고도모델이 무시되기 쉬우므로, 레이져 측량기술을 이용한 공간대상물에 대한 높은 정확도 취득이 크게 필요한 실정이다. 최근에는 레이져 측량기술과 GPS를 결합한 고밀도 고정도의 높이 값을 얻을 수 있는 LiDAR Data의 획득으로 그러한 한계를 극복하고 있는 추세이다. 비교적 LiDAR 관련 연구가 활발한 해외 선진기술을 연구하고 우리 실정에 적합한 3차원 지형 및 철도시설의 분석이 가능하도록 데이터의 생성기법 및 알고리즘을 개발하여 3차원 공간에서의 최적의 노선관리가 가능하도록 하였다. 이를 위하여 LiDAR Data를 중심으로 하는 높이 값을 DEM으로 변환하고, 디지털 영상의 매칭 및 정확도 평가 등을 통한 벡터와 래스터의 실시간 통합 및 전환으로 장거리 노선에서의 3차원 철도 모델의 생성을 통한 추적관리가 가능하도록 하였다.

  • PDF

철도노선관리에서의 공간 영상콘텐츠 기반의 궤적 모델 생성 (Track Models Generation Based on Spatial Image Contents for Railway Route Management)

  • 연상호;이영욱
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2008년도 추계학술대회 논문집
    • /
    • pp.30-36
    • /
    • 2008
  • 3차원 지형 환경의 공간영상콘텐츠는 국토계획 및 통신설비계획, 철도건설, 시공, 입체적인 유비쿼터스 도시 구현, 안전 및 방재 등에서 많은 요구와 그 중요성이 크게 부각되고 있다. 현재 지리정보 기반의 2차원적인 지도정보와 시설정보를 3차원의 도시공간으로 재현하기 위하여 기존의 등고선을 이용한 DEM 방식은 많은 한계를 가지고 있으며, 특히, 철도와 같은 노선 폭이 좁고 길이가 길어서 궤적 관리가 어려운 작은 구조물의 경우에는 그 고도모델이 무시되기 쉬우므로, 레이져 측량기술을 이용한 공간대상물에 대한 높은 정확도 취득이 크게 필요한 실정이다. 최근에는 레이져 측량기술과 GPS를 결합한 고밀도 고정도의 높이 값을 얻을 수 있는 LiDAR 데이터의 이용으로 그러한 한계를 극복하고 있는 추세이다. 비교적 레이져 측량을 우리 실정에 적합한 3차원 지형분석 및 철도시설에 적용하여 데이터의 생성기법기법을 개발하여 3차원 공간에서의 최적의 노선관리가 가능하도록 하였다. 이를 위하여 LiDAR Data를 중심으로 하는 높이 값을 DEM으로 변환하고, 디지털 영상의 매칭 및 정확도 평가 등을 통한 벡터와 래스터의 실시간 통합 및 전환으로 장거리 노선에서의 3차원 철도 모델의 생성을 통한 추적관리가 가능하도록 하였다. 그리하여 공간영상콘텐츠를 이용한 철도시설물 관리에서의 다양한 활용의 해답을 확인하였다.

  • PDF

자동연속흐름-흡광광도법과 DNPH-LC법에 의한 먹는물 중 포름알데히드 정량분석 비교 (Comparison of ACFAS method and DNPH-LC method for quantitative analysis of formaldehyde in Drinking water)

  • 이건호;윤인철;김영관;김종철;최금종;이택수
    • 상하수도학회지
    • /
    • 제27권6호
    • /
    • pp.827-836
    • /
    • 2013
  • Due to the stringent drinking water quality, formaldehyde will be included in Korean drinking water standard from year 2014. However, its standard analytical method has not yet been established. This study compares two analytical methods, DNPH-LC and ACFAS with respect to their analysis principles, Method Detection Limit (MDL), Limit Of Quantitation(LOQ), precision, accuracy, reproducibility, convenience, number of samples analyzed per hour and analysis cost. These methods measure absorption intensity at 360 nm by using HPLC after DNPH-derivatization (DNPH-LC) and at 410 nm by using Automated Continuous Flow Absorption Spectrophotometer (ACFAS), respectively. Reproducibility was tested by repeating the analysis 7 times using a standard solution for each method. For DNPH-LC method, MDL was $0.5{\mu}g/L$, LOQ was $1.58{\mu}g/L$ with standard deviation of $0.16{\mu}g/L$. For ACFAS method, they were $0.27{\mu}g/L$, $0.85{\mu}g/L$L with standard deviation of $0.09{\mu}g/L$, respectively. Both methods satisfied the requirement set by the Korean drinking water quality standard. Complexity of sample pretreatment procedure for DNPH-LC method may cause large error and, consequently, the analytical result will depend on the level of skill of analyst. In contrast, ACFAS method which used only one reagent equipped with an automated injection device showed little analytical error. It costs about $5.00 and $1.00 for one sample to analyze by the DNPH-LC method and the ACFAS method, respectively. Compared to the DNPH-LC method, ACFAS method provided more reliable analytical results. In terms of convenience, easiness and analytical cost, ACFAS method was demonstrated to be superior to the DNPH-LC method. The results of this study suggested that the ACFAS method could be adapted as a proper method for determining formaldehyde content in drinking water.