• Journal of radiological science and technology
• /
• v.45 no.5
• /
• pp.423-431
• /
• 2022

The purpose of this study is to present objective information in applying 3D printing technology for PET/CT (Positron Emission Tomography/Computed Tomography) performance evaluation and use it as a basic research that can be applied to various purposes in the future. Phantoms were manufactured with step wedge of ABS(Acrylonitrile Butadiene Styrene) and ACR(Acrylic acid) material. The counts for each ROI(Region of Interest) were analyzed through image acquisition in PET/CT. And the variation rate of counts and CNR(Contrast Noise Ratio) was evaluated. In the counts analysis, the effect of thickness occurred. In addition, in the variation rate analysis, the thickness setting of steps wedge 4 to 5 levels should be considered first. These results minimize quantitative and qualitative changes in the phantom manufactured based on 3D printing, and enable more stable PET/CT performance evaluation. Based on 3D printing in PET/CT, various phantoms are expected to be produced in the future. If the characteristics of each material are considered and applied through the basic research such as this research, the result of the phantom manufactured through 3D printing can be more meaningful and will be used in a wide range.

• Journal of the Korean Society of Radiology
• /
• v.16 no.3
• /
• pp.319-325
• /
• 2022

The Study In order to obtain a sharpness Image from Skull PA axial projection (Haas) in a head axial X-ray Examination, this study changed the posture angle using Skull Phantom and evaluated the image subjectively to 5 radiologists who worked in the Department of Imaging at University Hospital. In the prone position, the head was lowered 4 cm from the back of the head, entered 25° toward the head, and the image evaluation score was high with 20 points, such as the back bone, dorsum sellae projected in the large hole, and posterior clinoid process. In addition, the score significance was verified, and the Cronbach Alpha value was evaluated to have good reliability of 0.789. As a result of calculating the signal-to-noise ratio (SNR) by setting the region of interest (ROI) of the image, it was the highest at 5.957 for 25° incident at the back of the head and 6.430 for 30° incident at the back of the head. As a result of the study, in order to obtain a sharp image of the back of the head bone, dorsum sellae, and posterior clinoid process when shooting in the axial direction after the head, it is filmed by tilting 25° toward the head from 4 cm below the back of the head. In order to obtain a sharp image of rock pyramid symmetry, petrous ridge, sagittal suture, and lambdoid suture, it is thought that it will be helpful for clinical use if you shoot it 8cm down from the back of the head and tilt it 30° toward the head.

• Journal of Energy Engineering
• /
• v.16 no.4
• /
• pp.202-214
• /
• 2007

The concept of HSA (Home Service Aggregator) is derived from performing the energy IT business efficiently as well as successfully launcing a new service based on BPL (Broadband over Power Line). The HSA business using a BPL can extend the field of energy industry and an give a chance to create a new demand by consumer-oriented services. This study focuses on the exact evaluation of HSA business using BPL, and reasonable trusty evaluation should be the first step to launch the HSA business. In this study, the categories of cost are comprised of equipment (mainly RSM and MGW) cost, instalation cost, and maintenance cost. AMR (Automatic Meter Reading), internet integration billing service, integration charging service, internet service, sorority service, and electricity safety are listed for benefit. In this study, the ROI of HSA business is 0.9594, which is less than 1. However, that value does not consider the electricity safety benefit which is classified as a social benefit. Therefore, the value can be above 1 if it includes social and private benefits.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2006.11a
• /
• pp.683-692
• /
• 2006

IT투자 성과의 정량화에 대한 필요성이 높아짐에 따라 많은 학계와 연구단체에서 IT투자 성과의 화폐가치 전환 및 정량적 평가를 위한 다양한 측정방법들을 개발하여 제시하고 있으며, 이들 기법을 활용하여 IT투자 성과를 정량적으로 평가하는 기업들이 점차 늘고 있다. 그러나 이와 같은 IT투자성과의 정량적 평가 기법을 도입한 기업의 실무자들은 화폐가치로 전환되어 도출된 결과들이 가시적으로 확인될 수 있는 것이 아니기 때문에 IT가 제공하는 실 효과를 제대로 반영하여 평가되었는지에 대하여 확신하지 못하고 있다. 이에 본 연구는IT투자 성과의 정량적 평가 결과를 기존의 많은 연구를 통해 IT투자 성과의 정성적인 평가로 입증된 사용자 만족도로써 설명이 가능한지를 사례 기업의 정량적 평가결과와 사용자 만족도를 분석함으로써 상관관계를 파악하였다. 사례 연구 결과, 다음과 같은 시사점을 도출하였다. 첫째, 정보화 효과금액은 사용자 만족도와 상관관계가 있다. 둘째, 합리적인 정보화효과금액의 도출을 위해서는 조직 내에서 시스템의 효과를 정량화할 수 있는 지표 개발 및 화폐전환데이터의 관리가 중요하다. 셋째, IT ROI는 시스템간의 성과를 비교하는 것에는 부적절하며 개별시스템의 성과 및 효율성 측정 기준으로 사용한다. 넷째, 정량적 평가가 여전히 시스템의 전략적인 부분 등에 대한 평가에는 미흡하기 때문에 이를 보완하기 위한 방법으로 사용자 만족도의 사용이 가능하다.

• Journal of radiological science and technology
• /
• v.46 no.2
• /
• pp.151-157
• /
• 2023

The purpose of this study was to develop an assist device that could correct and support patient position during biopsy on computed tomography (CT) using 3D printing technology. The development method was conducted in the order of 3D design, 3D output, intermediate evaluation for product, final assist device evaluation. The 3D design method was conducted in the order of prior research data survey, measurement, primary modeling, 3D printing, output evaluation, and supplementary modeling. The 3D output was the 3D printer (3DWOX 2X, Sindoh, Korea) with additive manufacturing technology and the polylactic acid (PLA) materials. At this time, the optimal strength was evaluated to infill degree of product as the 3D printing factors into 20%, 40%, 60%, and 80%. The intermediate evaluation and supplementation was measured noise in the region of interest (ROI) around the beam hardening artifact on the CT images. We used 128-channel MDCT (Discovery 75 HD, GE, USA) to scan with a slice thickness of 100 kVp, 150 mA, and 2.5 mm on the 3D printing product. We compared the surrounding noise of the final 3D printing product with the beginning of it. and then the strength of it according to the degree of infill was evaluated. As a result, the surrounding noise of the final and the early devices were measured at an average of 3.3 ± 0.5 HU and 7.1 ± 0.1 HU, respectively, which significantly reduced the noise of the final 3D printing product (p<0.001). We found that the percentage of infill according to the optimal strength was found to be 60%. Finally, development of assist devices for CT biopsy will be able to minimize artifacts and provide convenience to medical staff and patients.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.8
• /
• pp.1424-1429
• /
• 2016

Segmentation is one of the first steps in most diagnosis systems for characterization of dental caries in an early stage. The purpose of automatic dental cavity detection system is helping dentist to make more precise diagnosis. We proposed the semi-automatic method for the segmentation of dental caries on digital x-ray images. Based on a manually and roughly selected ROI (Region of Interest), it calculated the contour for the dental cavity. A snake algorithm which is one of active contour models repetitively refined the initial contour and self-examination and correction on the segmentation result. Seven phantom tooth from incisor to molar were made for the evaluation of the developed algorithm. They contained a different form of cavities and each phantom tooth has two dental cavities. From 14 dental cavities, twelve cavities were accurately detected including small cavities. And two cavities were segmented partly. It demonstrates the practical feasibility of the dental lesion detection using Computer-aided Detection (CADe).

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06b
• /
• pp.126-131
• /
• 2010

IT 자원의 상호운용성 및 재활용성 등의 장점 통하여 새로운 비즈니스 환경변화에 가장 빠르게 대응할 수 있는 최적의 대안으로 서비스 지향 아키텍처(SOA : Service Oriented Architecture)가 최근 각광받고 있다. 그러나 구현의 복잡성 및 그에 따른 낮은 ROI(Return on Investment) 평가와 같은 SOA의 문제점들을 보완하기 위해 웹 지향 아키텍처(WOA: Web Oriented Architecture)가 제안되었다. 하지만 WOA 또한 보안 및 안정적인 메시지 전달 등의 문제점들을 안고 있다. 본 논문에서는 SOA와 WOA 구현의 핵심 개념을 연구하고, SOA 또는 WOA를 이용하여 서비스를 구현할 경우 중요한 핵심 개념의 복잡도를 AHP(Analytic Hierarchy Process) 기법을 통하여 평가하였다. 이를 통하여 SOA 또는 WOA 구현 시 요구되는 핵심 요구사항의 중요도를 평가하고 개발자에게 미치는 구현 복잡도를 측정할 수 있다.

• Korean Journal of Remote Sensing
• /
• v.40 no.2
• /
• pp.167-177
• /
• 2024

With advancements in satellite technology, interest in target detection and identification is increasing quantitatively and qualitatively. Synthetic Aperture Radar(SAR) images, which can be acquired regardless of weather conditions, have been applied to various areas combined with machine learning based detection algorithms. However, conventional studies primarily focused on the detection of stationary targets. In this study, we proposed a method to identify moving targets using an algorithm that integrates sub-aperture SAR images and cosine similarity calculations. Utilizing a transformer-based deep learning target detection model, we extracted the bounding box of each target, designated the area as a region of interest (ROI), estimated the similarity between sub-aperture SAR images, and determined movement based on a predefined similarity threshold. Through the proposed algorithm, the quantitative evaluation of target identification capability enhanced its accuracy compared to when training with the targets with two different classes. It signified the effectiveness of our approach in maintaining accuracy while reliably discerning whether a target is in motion.

• The Journal of the Korea Contents Association
• /
• v.19 no.8
• /
• pp.284-292
• /
• 2019

To evaluate the usefulness of pediatric chest CT scans by comparing the dose, examination time, and image quality by applying Helical mode, High-pitch mode, and Volume Axial mode to minimize the radiation exposure and obtain high diagnostic value. Revolution (GE Healthcare, Wisconsin USA) was used to divide PBU-70 phantom into Helical mode, High-pitch mode, and Volume Axial mode. After acquiring images, ROI is set for each image, heart, bone, lung, and back-ground air, and the average value is obtained by measuring CT number (HU) and noise (SD). SNR and CNR were measured and compared with DLP values provided directly by the equipment. Determining statistical significance Statistical analysis was performed using ONE-WAY-ANAOVA using SPSS 21.0. In this experiment, it was possible to inspect at a short time without deterioration of image quality with the lowest dose when using volume axial mode. Although the detector coverage of 16 cm is limited to all pediatric chest CT scans, it is recommended to be actively used in pediatric patients, and further study is needed to apply other test sites in volume axial mode.

• The KIPS Transactions:PartD
• /
• v.17D no.5
• /
• pp.317-326
• /
• 2010

Service Oriented Architecture (SOA), which supports various features such as interoperability and reusability of IT resources, comes into the spotlight as an effective approach for adapting new business environmental changes. SOA, however, has some problems including the high realization complexity and low Return on Investment (ROI). To solve these problems, Web Oriented Architecture (WOA) has gained attention. However, it also has some drawbacks about security concerns and unstable message transmissions. In this paper, we design a novel integrated architecture that classifies services into inside and outside ones and applies SOA for the former and WOA for the latter, respectively. By converging the advantages of SOA and WOA simultaneously, the proposed architecture becomes more simple and service-oriented, and can satisfy diverse requirements of customers. The usefulness evaluation of the proposed architecture is conducted through the Analytic Hierarchy Process (AHP) scheme.