• Korean Journal of Weed Science
• /
• v.16 no.3
• /
• pp.187-193
• /
• 1996

To supply seeds with a good quality as plant materials for herbicide screening and to know whether the germination characteristics could be associated with a differential response to herbicides, germination characteristics and differential responses to herbicides were investigated with 3 species of a genus Setaria ; Yellow foxtail(Setaria glauca P. Beauv, SETGL), Giant foxtail(Setaria faberi Hetrm, SETFA), and Green foxtail(Setaria viridis P. Beauv, SETVI). Degree of dormancy was high in the order of SETGL, SETVI and SETFA. The dormancy of SETGL seed was relatively well removed by room temperature and drying storage, but SETFA and SETVI by low temperature and wetting storage(stratification). For breaking dormancy of SETGL, SETVI and SETFA, it was necessary for being kept under the above storage conditions for at least 2, 4 and 4-5 months, respectively. When the dormancy-breaked seeds were transfered to low temperature($4^{\circ}C$) and drying condition, SETGL showed germination rate of 96% even after 2 month storage. However, SETVI and SETFA showed a decreased germination of 54% and 69%, respectively, with a decreased velocity of germination, indicating that secondary dormancy might be induced. On the other hand, a significant change in germination rate was not observed as the seeds were transfered to room temperature($25^{\circ}C$) and drying condition. The germinability of SETGL seed began to decline from 6th year after storage in room temperature and drying condition. All of 3 species showed relatively high germination rate at alternating temperature of $30^{\circ}C$/$20^{\circ}C$(14hr/10hr) and their germination were not increased by light. All of 3 species exhibited similar responses to cycloxydim, sethoxydim and primisulfuron in greenhouse experiment. In contrast, SETVI and SETFA were relatively susceptible to fenoxapropethyl, SETFA to fluazifop-butyl, SETGL and SETFA to clorimuron-ethyl, and SETGL to EK-2612. The difference in herbicidal response among 3 species was the highest in the treatment of EK-2612. These results suggest that there is no a consistent tendency in responses of 3 species to herbicides which have the same target site. And the relationship between germination characteristics and differential responses to herbicides was not found.

• Journal of Korean Home Economics Education Association
• /
• v.22 no.1
• /
• pp.51-65
• /
• 2010

The purpose of this study was to raise the awareness of LOHAS(Lifestyle of Health and Sustainability) in the secondary school students. We extracted the related contents to LOHAS from the unit of 'The choice and maintenance of clothing' in the second-year's textbook of Technology-Home Economics, and selected the learning subjects. We also developed the new teaching-learning process plan on practical problem focused lesson, and applied them to the eight classes located in Siheung, Gyeonggi-do, for 5 hours per each class. The learning subjects of the teaching-learning process plan included five items as followings; general awareness, organic fashion, natural fabric, recycled material fashion, and natural dyeing, which were related to LOHAS consumption. The overall topic of the teaching-learning process plan was 'What should do to raise the awareness of LOHAS in order to practice LOHAS consumption in the choice of clothing'. Consequently, the results were abtained as follow; The general awareness of LOHAS as well as the awareness of LOHAS consumption in the choice of clothing increased after classes significantly, compared to those before. Thirty-four materials including worksheets, reading materials and teacher's guide could help to raise the awareness of LOHAS. Also these classes enabled the students to raise their awareness of LOHAS, to improve their opinions and attitudes on LOHAS consumption in the choice of clothing, and to take an interest in the lesson of Home-Economics. This study might have the educational significance in that it made the students directly participate in the national and social trend of the awareness of LOHAS, and upgrade their quality as good LOHAS consumers. Also further teaching-learning process plan in Home-Economics are necessary to promote the awareness of LOHAS for better health, environment, and society.

• Journal of Ecology and Environment
• /
• v.29 no.6
• /
• pp.585-591
• /
• 2006

We measured the litterfall quantity and investigated the nutrient dynamics in decomposing litter for three years at the LTER sites installed in a deciduous broadleaf natural forest in Mt. Gyebangsan, South Korea. Litterfall production was significantly different among the sampling dates, whereas it was not significantly different among the years. The total annual mean litterfall production for three years was 6,593 kg $ha^{-1}$ $yr^{-1}$ and leaf litter accounted for 82.6% of the litterfall. The leaf litter quantity was highest in Quercus mongolia, followed by leaf of other species, Betula schmidtii, Kaplopanax pictus, Acer pseudo-sieboldianum, etc., which are dominant tree species in the site. The mass loss from the decomposition of leaf litter was fastest in Cortinus controversa (100%), followed by A. preudo-sieboldianum, K. pictus, and B. schmidtii. 100% of litter for C. controversa, 96.1% for A. pseudo-sieboldianum, 92.8% for K. pictus decomposed, while 66.2% of litter for Q. mongolia decayed for 1,003 days. The lower rate of the mass loss in the litter of Q. mongolia may be attributed to the difference in substrate quality, such as lower nutrient concentrations compared with those of other tree species. The concentrations of N, P, and Ca for five litter types increased over time, while the concentrations of K and Mg decreased over time. Compared with the nutrients in the litter of Q. mongolia, the nutrients (N, P, K, Ca, Mg) in the litter of other species, C. controversa, A. pseudo-sieboldianum, and K. pictus, were released more rapidly. The results showed that the mass loss and the nutrient dynamics in the litter are variable depending on the tree species even in the same site conditions.

• Journal of the Korean earth science society
• /
• v.33 no.6
• /
• pp.469-480
• /
• 2012

This study was to analyze the characteristics of diurnal variation of high $PM_{2.5}$ concentration, $PM_{2.5}/PM_{10}$ concentration ratio by spatio-temporal wind system (wind speed and wind direction) for high $PM_{2.5}$ concentration (over the 24 hr environmental standard of $PM_{2.5}$, $50{\mu}g/m^3$) in the air quality observation sites (Jangrimdong: Industrial area, Jwadong: Residential area) that were measured for 3 years (2005. 12. 1-2008. 11. 30) in Busan. The observation days of high $PM_{2.5}$ concentration were 182 at Jangrimdong and 27 at Jwadong. The seasonal diurnal variation of hourly mean of high $PM_{2.5}$ concentration and of $PM_{2.5}/PM_{10}$ concentration ratio showed a similar pattern that had higher variation at dawn, and night and in the morning than in the afternoon. Durning daytime in summer at Jwadong, the $PM_{2.5}/PM_{10}$ concentration ratio increased because a secondary particulate matter, which was created by photochemical reaction, decreased the coarse particles of $PM_{10}$ more than the fine particles of $PM_{2.5}$ concentrations in ocean condition. We did an analysis of spatio-temporal wind system (wind speed range and wind direction) in each time zone. The result showed that high $PM_{2.5}$ concentration at Jangrimdong occurred due to the congestion of pollutants emissions from the industrial complex in Jangrimdong area and the transportation of pollutants from places nearby Jangrimdong. It also showed that high $PM_{2.5}$ concentration occurred at Jwadong because of a number of local residential and commercial activities that caused the congestion of pollutants.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.6
• /
• pp.721-726
• /
• 2009

The objectives of this study were to analyze mineral contents of three rice varieties (Josangheugchal, Heugjinjubyeo and Dongjinchalbyeo) under three different cultural practices: five transplanting time (May 15, May 25, June 4, June 14, and June 24), five harvest times (30, 40, 50, 60, and 70 days) and N-fertilization levels (0.0, 4.5, 9.0, 13.5, and 18.0 kg/10a). Mineral contents of Josangheugchal were increased by late transplanting time with increased nitrogen level; however, it was not significantly different by harvest time. Heugjinjubyeo did not show significant difference in three cultivations. Mineral contents of Dongjinchalbyeo increased at the transplanting time of May 25 and June 14 and according to late harvest time. Also mineral contents of Dongjinchalbyeo that did not show significant difference except for calcium according to different nitrogen levels.

• Journal of Gastric Cancer
• /
• v.8 no.4
• /
• pp.232-236
• /
• 2008

Purpose: Laparoscopic surgery for gastric cancer was introduced in the past decade because it was considered less invasive than open surgery, and this results in less postoperative pain, faster recovery and an improved quality of life. Several studies have demonstrated the safety and feasibility of this procedure. We examined the outcome of performing laparoscopic surgery for gastric cancer over the last two year. Materials and Methods: From April 2004 to December 2006, 329 patients with gastric adenocarcinoma underwent a laparoscopy-assisted distal gastrectomy with lymph node dissection. The data was retrospectively reviewed in terms of the clinicopathologic findings, the perioperative outcomes and the complications. Results: The total patient group was comprised 196 men (59.6%) and 133 women (40.4%). The mean BMI was 23.6 and the mean tumor size was 2.7 cm. The mean number of harvested lymph node was 22.7, and this was 18.6 before 30 cases and 23.1 after 30 cases, and the difference was significant (P=0.02). The mean operation time was 180.9 min, and this was than 287.9 min before 30 cases and 170.2 min after 30 cases. After 30 cases, there was a significant improvement of the operation time (P<0.01). The mean incision length after 30 cases was shorter than that before 30 cases (P<0.01). Postoperative complications occurred in 24 (7.3%) of 329 patients and there was no conversion to open surgery. Conclusion: Even though the LADG was accompanied by a difficult learning curve, we successfully performed 329 LADG procedures over the past 2 years and we believe that LADG is a safe, feasible operation for treating most early gastric cancers (EGC).

• Journal of Bio-Environment Control
• /
• v.21 no.4
• /
• pp.322-326
• /
• 2012

Recently, researches related to plant factory system has been activated and production of Ssam-vegetables using artificial lighting has been increasing. In South Korea, Ssam-vegetables are very popular and the consumption is increasing every year. Because leaf vegetables cultivated under hydroponic systems are more preferable rather than those cultivated by soil culture in Korea, the plant factory system would be more effective in production of Ssam-vegetables. Therefore, this study was carried out in order to analyze the yield and vitamin C contents in red mustard (Brassica juncea L.) and pak-choi (Brassica campestris var. chinensis), which are used a lot for the Ssam-vegetables in South Korea, as influenced by different concentrations of the nutrient solution in a plant factory system. As a results, there was no significant differences in the plant height among the treatment of EC in the nutrient solution, but for red mustard plants, the number of leaves tended to decrease in the treatment with higher EC. Leaf area of pak-choi plants was significantly increased in the higher EC, while the fresh weight had a tendency to increase along with increasing EC in the nutrient solution for both crops. The photosynthetic rates did not show a distinct tendency by EC levels for red mustard plants, but for pak-choi plants, it tended to be higher at the high EC. The contents of ascorbic acid in leaves were higher with decreasing EC concentration in the nutrient solution for red mustard plants, while the content was the highest at EC $2.0dS{\cdot}m^{-1}$ for pak-choi plants. In summary, considering the marketable yields and vitamin C at different nutrient concentrations in a plant factory, the optimal concentration for red mustard and pak-choi plants was thought to be EC $2.0{\sim}2.5dS{\cdot}m^{-1}$.

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.3
• /
• pp.305-313
• /
• 2020

The use of cable tunnels for electric power transmission as well as their construction in difficult conditions such as in subsea terrains and large overburden areas has increased. So, in order to efficiently operate the small diameter shield TBM (Tunnel Boring Machine), the estimation of advance rate and development of a design model is necessary. However, due to limited scope of survey and face mapping, it is very difficult to match the rock mass characteristics and TBM operational data in order to achieve their mutual relationships and to develop an advance rate model. Also, the working mechanism of previously utilized linear cutting machine is slightly different than the real excavation mechanism owing to the penetration of a number of disc cutters taking place at the same time in the rock mass in conjunction with rotation of the cutterhead. So, in order to suggest the advance rate and machine design models for small diameter TBMs, an EPB (Earth Pressure Balance) shield TBM having 3.54 m diameter cutterhead was manufactured and 19 cases of full-scale tunneling tests were performed each in 87.5 ㎥ volume of artificial rock mass. The relationships between advance rate and machine data were effectively analyzed by performing the tests in homogeneous rock mass with 70 MPa uniaxial compressive strength according to the TBM operational parameters such as thrust force and RPM of cutterhead. The utilization of the recorded penetration depth and torque values in the development of models is more accurate and realistic since they were derived through real excavation mechanism. The relationships between normal force on single disc cutter and penetration depth as well as between normal force and rolling force were suggested in this study. The prediction of advance rate and design of TBM can be performed in rock mass having 70 MPa strength using these relationships. An effort was made to improve the application of the developed model by applying the FPI (Field Penetration Index) concept which can overcome the limitation of 100% RQD (Rock Quality Designation) in artificial rock mass.

• Journal of Intelligence and Information Systems
• /
• v.16 no.2
• /
• pp.129-141
• /
• 2010

An Internet shopping mall for clothing operates a warehouse for packing and shipping products to fulfill its orders. All the products in the warehouse are put into the boxes of same brands and the boxes are stored in a row on shelves equiped in the warehouse. To make picking and managing easy, boxes of the same brands are located side by side on the shelves. When new products arrive to the warehouse for storage, the products of a brand are put into boxes and those boxes are located adjacent to the boxes of the same brand. If there is not enough space for the new coming boxes, however, some boxes of other brands should be moved away and then the new coming boxes are located adjacent in the resultant vacant spaces. We want to minimize the movement of the existing boxes of other brands to another places on the shelves during the warehousing of new coming boxes, while all the boxes of the same brand are kept side by side on the shelves. Firstly, we define the adjacency of boxes by looking the shelves as an one dimensional series of spaces to store boxes, i.e. cells, tagging the series of cells by a series of numbers starting from one, and considering any two boxes stored in the cells to be adjacent to each other if their cell numbers are continuous from one number to the other number. After that, we tried to formulate the problem into an integer programming model to obtain an optimal solution. An integer programming formulation and Branch-and-Bound technique for this problem may not be tractable because it would take too long time to solve the problem considering the number of the cells or boxes in the warehouse and the computing power of the Internet shopping mall. As an alternative approach, we designed a fast heuristic method for this reallocation problem by focusing on just the unused spaces-empty cells-on the shelves, which results in an assignment problem model. In this approach, the new coming boxes are assigned to each empty cells and then those boxes are reorganized so that the boxes of a brand are adjacent to each other. The objective of this new approach is to minimize the movement of the boxes during the reorganization process while keeping the boxes of a brand adjacent to each other. The approach, however, does not ensure the optimality of the solution in terms of the original problem, that is, the problem to minimize the movement of existing boxes while keeping boxes of the same brands adjacent to each other. Even though this heuristic method may produce a suboptimal solution, we could obtain a satisfactory solution within a satisfactory time, which are acceptable by real world experts. In order to justify the quality of the solution by the heuristic approach, we generate 100 problems randomly, in which the number of cells spans from 2,000 to 4,000, solve the problems by both of our heuristic approach and the original integer programming approach using a commercial optimization software package, and then compare the heuristic solutions with their corresponding optimal solutions in terms of solution time and the number of movement of boxes. We also implement our heuristic approach into a storage location assignment system for the Internet shopping mall.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.3
• /
• pp.22-31
• /
• 2012

This study was prompted by the recognition that the tenn "Community design" has recently been used in diverse practical fields without prior discussion about its underpinnings, a potentially problematic state of affairs. Based on these problems, this study studied the special quality about the concept of community design. Community design can be discussed from two perspectives. The first views community design as a design that concerns the community, an inhabited area populated with people who have common interests, at least in part because of geographic proximity to each other. The second sees community design as a movement that started in the 1960s and places a great importance on democratic decision making, communication, and collaboration. This study will focus on the latter. This branch of community design encompasses an advocacy planning approach, in which design professionals represent deprived communities in their resistance against comprehensive redevelopment. This was associated to the wider social protest movements of the mid and late 1960s. In the 1970s, this branch of community design was developed alongside community design centers, which provided local-level technical assistance to the communities on a number of issues, such as design and planning. The discussion about community design started in earnest from the early 1980s. A review of the literature m community design reveals several characteristics. First, community design deals with the relationship between the physical environment and several aspects of a region, including the social and cultural. Second, it involves community participation, which many scholars believe is the core of community design. Specifically, community design has been characterized by increased participation and democratic debate and decision making. The Third is about communication methods. Since the 1960s, diverse methods had been developed to promote communication effectively. Finally, community design must consider the relationship between designers, who typically value aesthetics and efficiency of form, and the needs of the community with which they are working. Indeed, some scholars believe that this relationship is generally contentious, although the designer can also be thought of as the facilitator of the community's needs. As community design practice becomes more prevalent, a review of the foundation of institution and policy and the role of experts is also needed. The community design movement bas been theorized ex post facto through diverse discussion that has sought to ascribe meaning and direction to its practice. In other words, the relationship between this theory and practice is cyclical. Therefore, this study can contribute to the virtuous circle.