• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.19 no.4
• /
• pp.27-38
• /
• 2023

The Government the Republic of Korea is showing a lot of interest in net zero-energy buildings (NZEBs) to reduce energy consumption of buildings and to promote green growth policy in construction sector. The application of building passive technologies and renewable energies is essential to achieving NZEBs. Green remodeling reinforced the insulation of the exterior walls and roofs of the buildings and replaced high-efficiency windows and doors. In this study, the energy performance before and after green remodeling applied in a detached house was comparatively analyzed for baseline scenario and three different ones, ALT 1, ALT 2 and ALT 3. A building modeling and simulation software (DesignBuilder V7.0) with EnergyPlus (V9.4) calculation engine was used to calculate the energy demand and energy consumption for each scenario. Based on the calculation results of the building's energy demand for baseline, it was determined that the target building required more heating energy than cooling energy. The simulation results also showed that the implementation of building envelope performance improvement technologies (ALT 1) could notably decrease the heating energy consumption of the building. After the remodeling (ALT 1), the source energy consumption per unit floor area was assessed to be reduced by 65.2%, compared to prior remodeling of 338.7 kWh/m² -y. Meanwhile, ALT 2 can achieve energy savings of 67.7% and ALT 3 can achieve savings of 73.1%. Following completion of the remodeling project, actual construction costs, and on-site measurements and verification results will be gathered and compared with the simulation results. Additionally, economic analysis including construction costs and payback period will be conducted using actual site data.

• Journal of Veterinary Clinics
• /
• v.17 no.1
• /
• pp.275-278
• /
• 2000

A 3-year-old yorkshire terrier was examined because of the green-like vaginal discharge. Abdominal ultrasonographs revealed dead fetuses in the abdominal cavity. Surgical exploration revealed fetuses located in the region of the uterine wall, the omentum, the ileum, and the upper right side of the liver respectively. Fetal structures were removed and an ovariohysterectomy was performed. The abdominal cavity was flushed with warm saline and then the incision closed. These fetuses were at different stages of development. It was suggested that the development of the fetuses apparently continued in extrauterine pregnancy until the blood supply became inadquate for further growth.

• Microbiology and Biotechnology Letters
• /
• v.17 no.2
• /
• pp.170-172
• /
• 1989

It is preyed that marine algae, Chlorella pyrenoidosa can synthesize about 3.52% of eicosapentaenoic (EPA) of dry cell weight at the light intensity of 10 W/$\m^2$ which is optimal light intensity of producing EPA at $25^{\circ}C$. An equation to predict the amounts of EPA in the culture broth is derived as an exponential form with 0.91 of the correlation factor. The behavior of cell growth follows a photo-inhibition model by showing 12 W/$\m^2$ of saturation light intensity.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.11a
• /
• pp.1212-1214
• /
• 2012

생장예측모델이란 작물의 생장 시스템 내에서 일어나는 기작이나 생산과정을 수식으로 묘사하는 것이다. 신뢰성 있는 생장예측모델을 만들기 위해서는 생장과 관련된 대량의 데이터가 필요하다. 본 논문에서는 IT와 농업을 융합한 시설 원예작물 생장예측모델을 위한 생장 및 생장환경 데이터 수집 시스템 설계사례를 소개하고자 한다.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.5
• /
• pp.667-673
• /
• 2010

Organic agriculture of especially medicinal crops has been interested and focused in taking the qualitative and safety agricultural products in order to maintain and improve the health and happiness of people. With respect to the organic agriculture relating to cropping system, objectives of this study were to examine the seedling establishment after seed germination and emergence and to investigate the early seedling growths of Astragalus membranaceus Bunge with treating two green manure crops, hairy vetch of legume and rye of gramineae, two different conditions of green manures, fresh and dry, and different seeding times. When the seeds were planted at once after treating the green manures with the fresh condition into the soil, the ratios of seedling establishment were very poor, less than 10% in hairy vetch and 20% in rye, respectively. They were increased gradually with delaying the seeding times after the treatments. With treating the green manures of dry conditions, the ratios of seedling establishment were up more than 50% in both hairy vetch and rye crops, showing that the damages of seedling establishment were more in hairy vetch than those in rye. The early seedling growths were slower in treating the green manures than those in the control, showing slow growth with fresh green manures compared to the dry. It would be very important and considered more to evaluate and utilize well the seed germination and the seedling establishment in cultivation of the organic agriculture using the green manure crops relating to the cropping system.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.5
• /
• pp.294-299
• /
• 2000

Hairy vetch (Vicia villosa Roth) winter annual is very effective on reducing chemical nitrogen fertilizer for subsequent com by fixed organic green manure nitrogen fixed during hairy vetch growth. In this experiment, hairy vetch produced above-ground dry matter of 5 ton/ha, nitrogen yield 200 kgN/ha, at com planting on the average during 1997 and 1998. Changes in com yield and nitrogen uptake for two years were investigated after application of nitrogen fertilizer 0, 60, 120, 180, 240 kgN/ha on plot of winter fallow and hairy vetch green manure, respectively. Nitrogen status such as ear-leaf N%, SPAD value at silk and dough stage, and com yield decreased in proportion to reduction of nitrogen fertilizer at winter fallow, but nitrogen status and yield of com were not different among nitrogen fertilizer rate at hairy vetch green manure. Com yield (total dry matter) at 0 kgN/ha plot of hairy vetch was 22, 20 ton/ha in 1997, 1998, respectively and com could produce more dry matter 9, 13 ton/ha by hairy vetch green manure compared with winter fallow under the condition of no nitrogen fertilizer in 1997, 1998, respectively. Com yield (total dry matter) at 60kgN/ha of hairy vetch green manure was higher than that of high N fertilizer rate such as 180, 240 kgN/ha of winter fallow. Nitrogen uptake of com at plot of hairy vetch-no nitrogen fertilizer slightly decreased than at plot of hairy vetch - nitrogen fertilizer, but com absorbed more nitrogen of 141, 159 kgN/ha by hairy vetch green manure compared with winter fallow under no nitrogen fertilizer condition in 1997, 1998, respectively. Nitrogen fertilizer reduction for com by hairy vetch green manure was 149, 161kgN/ha in 1997, 1998, respectively. Still more, com could absorb more soil nitrogen by nitrogen fertilizer 60kgN/ha of hairy vetch green manure than by high nitrogen fertilizer such as 180, 240 kgN/ha at winter fallow. It is concluded that nitrogen fertilizer for corn could be reduced by winter cultivation and soil incorporation of hairy vetch at com planting.

• The Journal of Fisheries Business Administration
• /
• v.38 no.1 s.73
• /
• pp.1-17
• /
• 2007

This study is aimed at investigating optimum level of payments in the direct payment program for aquaculture extruded pellets both theoretically and practically by analyzing the effects on production and income in accordance with Green Box conditions of WTO Agreement on Agriculture. In particular, by analyzing both effects on production and income, it evaluates and compares payments affecting to the level of production and income, respectively. Analysis results indicate that the optimum level of payments in the direct payment program for aquaculture extruded pellets is determined by the growth rate of farmed fish, farming period, price and volume of extruded pellets, and additional amount of cost increase and decrease. Suppose that growth rates of farmed fish by extruded pellets(EP) and raw fish - based moist pellets(MP) are the same, it reveals the optimum level of payment should be lowered from the current level of payment. However, when the growth rate of farmed fish by EP is lower than that by MP, the optimum level of payment should be raised from the current level and total amount of payments by area should be increased as well.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.3 no.2
• /
• pp.75-82
• /
• 2011

Recently the technology of green growth became more important role among the problems of running out of fossil fuels and global warming. To procure a new growth power combined with energy and green growth, a lot of investment for wind power, photovoltaics system, fuel cell and biofuel expanded day by day. Among these, wing power has a merit of a highly economic and no discharge of toxic substance. These days government and industrial companies actively support the development of wind power technology with lots of investment, but domestic related education and equipment still stay in research level when it is compared with foreign advanced countries which lead the wind power technology. Therefore to expand the base of basic skill required in the related industrials and to advance technology, we are in the situation to be needed a development of a new curriculum and educational equipment which is analogous with the actual industrial system. In this paper a development of a new educational equipment for the learning of turbine control is introduced. This educational equipment has been developed for students to get easy understanding for the theory of wind turbine control. And finally to demonstrate the effect of the use of the developed equipments and curriculum a questionnaire carried out.

• Journal of KIBIM
• /
• v.5 no.4
• /
• pp.53-62
• /
• 2015

Korea has been at the forefront of green growth initiatives. In 2008, the government declared the new vision toward 'low-carbon society and green growth'. The government subsidies and Feed-in Tariff (FIT) increased domestic usage of solar power by supplying photovoltaic housing and photovoltaic generation systems. Since 2000, solar power industry has been the world's fastest growing source with the annual growth rate of 52.5%. Especially, BIPV(Building Integrated Photovoltaic) systems are capturing a growing portion of the renewable energy market due to several reasons. BIPV consists of photovoltaic cells and modules integrated into the building envelope such as a roof or facades. By avoiding the cost of conventional materials, the incremental cost of photovoltaics is reduced and its life-cycle cost is improved. When it comes to atypical building, numerous problems occur because PV modules are flat, stationary, and have its orientation determined by building surface. However, previous studies mainly focused on improving installations of solar PV technologies on ground and rooftop photovoltaic array and developing prediction model to estimate the amount of produced electricity. Consequently, this paper discusses the problem during a planning and design stage of BIPV systems and suggests the method to select optimal design of the systems by applying the national strategy and economic policies. Furthermore, the paper aims to develop BIM tool based on the engineering knowledge from experts in order for non-specialists to design photovoltaic generation systems easily.

• Journal of the Korean Magnetics Society
• /
• v.21 no.6
• /
• pp.214-218
• /
• 2011

In this study, we have systematically investigated the effect of sputtering conditions on the microstructural properties of Ag/CoFeB thin film on MgO substrate. It was found that the crystallinity and surface roughness of the Ag film strongly depends on the Ar sputtering pressure and sputtering power. Epitaxial growth of Ag(100) film on MgO(100) substrate was achieved under the sputtering conditions of high sputtering power and elevated temperature. XRR (X-ray reflectivity) and high-resolution TEM (transmission electron microscopy) measurements also revealed the interfacial roughening in the Ag/CoFeB interface due to the island structure formation and intermixing between Ag and CoFeB.