• The Plant Pathology Journal
• /
• v.17 no.6
• /
• pp.350-353
• /
• 2001

In 2001, a black scab disease was observed in tea plant (Thea sinensis) cultivated in the hillsides of Hwngaemyon and Hadong-gun, Gyeongnam province, Korea. The disease symptoms initially appeared on leaves, green twigs and stems, showing small dark brown spots on the infected areas, which gradually expanded. A fungus was isolated from diseased leaves and green twigs. It grew readily on potato dextrose agar, forming dark green to dark gray colonies. The optimum temperature for mycelial growth was about 20$^{\circ}C$. The diameter of growing hyphae was 3.5-5.8 $\mu\textrm{m}$. Conidia were ellipsoidal, ovoid or subspherical, and mostly one-celled but occasionally septate. The size of one-celled and septate conidia were 3.7-12.4${\times}$3.4-5.2 $\mu\textrm{m}$ and 9.3-18.7${\times}$3.8-7.2 $\mu\textrm{m}$, respectively. Conidia were formed in long branched chains on the erected conidiophores, which were dark brown in color and 28.9-218.3${\times}$3.0-6.1 $\mu\textrm{m}$ in length. The fungus was identified as Cladosporium herbarum on the basis of its morphological characteristics. The black scab disease occurring in tea caused by Cladosporium herbarum has not been previously reported in Korea.

• KIEAE Journal
• /
• v.15 no.4
• /
• pp.77-84
• /
• 2015

Purpose: In 2008, As the green growth policy was presented, Green Building is made any effort to propagation. In this paper, the respective technologies that are able to considerably reduce the energy demands for heating, cooling, hot-water, lighting and ventilation among the variety of technologies were selected. Method: Design factors such as (1) External insulation, (2) Triple glazing window, (3) LED lighting, (4) External venetian blind, (5) Geothermal and (6) Heat recovery ventilator were derived. In addition, energy saving effects in terms of energy demand, energy consumption and energy cost were investigated using EnergyPlus, building energy analysis tool. Result : The results were as follows. (1) It can be seen that high insulated triple glazing window, heat recovery ventilator and external insulation technology is excellent for energy demand. (2) Unlike energy demand, saving effect of energy consumption and energy cost was shown in order of Geothermal > Triple Window > Heat recovery Ventilation> Insulation> LED Lighting > EVB Blind.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.4
• /
• pp.247-253
• /
• 2008

Winter annual green manure crops may be an effective tool for environmental-friendly agriculture system. The effect of legume (hairy vetch), non-legume (rye) and N fertilization ($190kg\;N\;ha^{-1}$) was examined and compared on red-pepper yield, nitrogen uptake, carbohydrate composition, and soil N and C contents. We monitored soil N and C for 120 days after incorporation (DAI) of green manures or mineral fertilizer. The mineralization of nitrogen reached the maximum around 30 DAI. The amount of inorganic nitrogen supplied by mineralization of hairy vetch residue was greater with than chemical N or rye. Photosynthetic rate was similar by 70 DAT in all treatments however, it in rye-incorporated red-pepper presented a sharp decline at later growth period. Leaf total nitrogen was greater with hairy vetch and chemical N than rye throughout the experiment. The soluble sugar increased steadily in all treatments from 40 to 110 days after transplanting (DAT) whereas starch showed a tendency of great decrease. Hairy vetch greatly promoted red-pepper growth by the later period however, chemical N showed the highest fruit yields.

• Journal of Plant Biology
• /
• v.17 no.4
• /
• pp.11-17
• /
• 1974

The present investigation dealt with observation and experiments concerning the growth and differentiation of hop plant, using the varieties of Cascade(C), Shinshuwase(Sh), and Hallertau(H). The results were as follows: (1) Life cycle of hop plants. The annual growth period of hop plant was devided chiefly into 3 phases, dormant, vegetative and reproductive. (2) Growth of main stem. The hop vine begun to grow in the middle of May and grow vigorousely in the middle and latter of June, then gradually decline or stops at the middle of July and the early of August. (3) Growth of lateral vines. By the statistical analysis, it is judged that the varieties of H and Sh were more grown than that of C. H and Sh were not significant, but H and Sh from C were significant in 5% level. (4) Fresh weight and water content of hop cone. Hop cone in fresh weight of C variety was higher than those of other two varieties and water content of hop cone was decreased with time elapse in three races together. (5) Growing point. Histological view of hop varities in each was different. C showed form of sweet potato, H showed form of round, and Sh showed form of ellipse. (6) Shape of the leaf. C and H were 3 lobes, but Sh is 3∼5 lobes. Generally, the color is dark green. (7) Hop cones. Hop cones are as follows.

• Journal of Environmental Science International
• /
• v.20 no.11
• /
• pp.1417-1423
• /
• 2011

For evaluating the effect of various organic fertilizer ratios on the Spiraea${\times}$bumalda 'Gold Mound' growth, a container green wall system experiment was conducted in a greenhouse at Konkuk university. The experimental planting grounds were prepared with different organic fertilizer ratios ($A_1L_0$, $A_8L_1$, $A_4L_1$ $A_2L_1$ and $A_1L_1$) and with drought tolerance and an ornamental value Spiraea${\times}$bumalda 'Gold Mound' was planted. The change in soil moisture contents, plant height, number of branches, number of dead leafs, number of leaf, number of shoots, length of node, length of leaf, width of leaf, root-collar caliper, chlorophyll contents and survival rate were investigated from April to Jun 2010. 1. The result of soil moisture contents was analyzed with weight unit in the container green wall system during the dry summer season. The soil moisture contents were significantly enhanced in the container green wall system in increasing order as the amount of fertilizer level increased $A_1L_1$ > $A_2L_1$ > $A_4L_1$ > $A_8L_1$ > $A_1L_0$. 2. Compared to the control treatment (amended soil with 100% + organic fertilizer 0%) application, the highest plant growth was observed in the treatment of $A_2L_1$(amended soil with 67% + organic fertilizer 13%) application. However, the differences between the organic fertilizer ratio treatments of $A_1L_1$, $A_4L_1$, $A_8L_1$, and the $A_1L_0$ organic fertilizer application were mostly not significant. 3. The survival rate increased with the increasing application of organic fertilizer, but in the control treatment (amended soil with 100% + organic fertilizer 0%) application all the plants died. Experimental results from the presented study clearly demonstrated that the organic fertilizer improved the survival rate more than the Spiraea${\times}$bumalda 'Gold Mound' growth at different levels of organic fertilizers. This strain can be utilized as a plant growth application in living wall systems during the dry summer season. Therefore, Spiraea${\times}$bumalda 'Gold Mound' is expected to be a highly valuable shrub for the green wall system if it should be considered in integration with stormwater retention or as a soil conditioner for increasing soil water contents in planting ground.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.4
• /
• pp.28-36
• /
• 2014

We studied the green synthesis and antibacterial activity of paper coated with chitosan-silver (Ag) green nanocomposites for packaging applications. Green synthesis of Ag nanoparticles (AgNPs) was achieved by a chemical reaction involving a mixture of chitosan-silver nitrate ($AgNO_3$) in an autoclave at 15 psi, $121^{\circ}C$, for 30 min. AgNPs and their formation in chitosan was confirmed by UV-Vis spectroscopy, transmission electron microscopy (TEM) and dynamic light scattering (DLS). As-prepared chitosan-AgNPs composite materials were coated on manila paper using Meyer rod. Surface morphology and Ag contents in coating layer were characterized by field emission scanning electron microscopy (FESEM) and energy dispersive spectroscopy (EDS). The mechanical properties such as tensile strength and elongation were significantly affected by coating with chitosan-AgNPs. The antibacterial test of coated paper was performed qualitatively and quantitatively against Escherichia coli (E. coli). It was shown to be effective in suppressing the growth of E. coli with increasing Ag contents on the surface of coated paper and more than 95 R (%) of antimicrobial rate was obtained at chitosan-AgNPs coated papers.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.4
• /
• pp.272-275
• /
• 2000

Winter green manure crops including legume increase grain yield of subsequent crop and substitute N fertilizer requirement with organic-No Hairy vetch grows vigorously and can provide N-rich green manure for corn with its soil incorporation after wintering. But, grain yield of corn as succeeding crop would be reduced if its planting time is delayed until late spring. This experiment was carried out to find the proper incorporation time of hairy vetch green manure and planting time of subsequent corn in cropping system with winter hairy vetch(green manure)-summer corn. Hairy vetch was incorporated into soil at a ten-day interval between April 10 and May 10 and corn was planted at 5 days after each hairy vetch incorporation. Soil nitrate concentration on April 10 and 20 in hairy vetch plot was slightly lower than that at winter fallow. Above-ground dry matter and organic-N of hairy vetch increased linearly with delayed hairy vetch incorporation time from April 10 to May 10. Average dry matter and organic-N produced by hairy vetch were 5.7 ton/ha and 248 kgN/ha, respectively. Corn growth and yield decreased as delayed corn planting time after May in spite of increasing dry matter and N-yield of hairy vetch. Nitrogen concentration of corn grain, stalk and whole plant at harvest were the highest in May 5 planting, but total N-uptake of May 5 planting were not different from that of April 25 planting because of lower grain yield. It was concluded that the proper incorporation time of hairy vetch and corn planting time were April 20 and April 25, respectively, because grain yield was the highest and corn could use hairy vetch-N effectively to produce dry matter.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.34 no.2 s.115
• /
• pp.18-25
• /
• 2006

This study aims to measure and to analyze the thermal environment characteristics of the various permeable pavement materials such as grass pavement (GREEN BLOCK PARK), stone and grass pavement (GREEN BLOCK STEP), stone pavement (GREEN BLOCK MOSAIC) and wood pavement (WOOD BLOCK) under the summer outdoor environment. The thermal environment characteristics measured in the study includes the changes of surface temperature during the day, changes of the temperature on each pavement layer, and long and short wave radiation of each pavement surface. The experimental condition is based on the data on the hottest temperature (August 5, 2005, $34.0^{\circ}C$) of the you. Some of main findings are: 1) The heat environment was worse on the wood pavements than on the stone pavement. This is mainly due to the low albedo of the wood pavements (0.37) while the albedo value of stone pavements is 0.41. Small heat capacity of the wood pavements also contributes to this difference. 2) The heat environment was worse on the stone pavements than on the turf pavements. This was mainly due to the evapotranspiration of the plant growth layer of the turf pavements. 3) The peak surface temperature was the highest on the wood pavements ($56.1^{\circ}C$). The peak surface temperatures on the stone pavements, the stone-grass pavements and the grass pavements were $43.1^{\circ}C,\;40.1^{\circ}C\;and\;37.9^{\circ}C$, respectively. 4) To improve the thermal environments in the urban area, it is recommended to raise the albedo of the pavements by brightening the surface color of the pavement materials. Further studies on the pavement materials and the construction methods which can enhance the continuous evapotranspiration from the pavements surface are needed.

• Journal of Construction Engineering and Project Management
• /
• v.8 no.3
• /
• pp.1-23
• /
• 2018

Since the protection the of human being from natural disaster and atmospheric factors have become an essential requirement, some attempts have been taken place to provide shelter and create a safe environment to a more comfortable life with welfare. For this purpose, using existing resources in nature and exploiting them in a different manner have been taken into account. Initially, the performed exploitations for construction had the least damage to the environment, but over time and as a result of population growth, aggressive exploitation of nature has led to destroying effects on the environment and resulted in consequences such as pollution and environmental destruction. Thus, the construction industry has been identified as the top pollutant factors of the environment. Among various construction factors, the building materials used in this industry are considered as the most important effective factors on the environment, as they have direct influences on the environment from the beginning of construction of the final steps. This research focuses on the review of the most of the existing green materials definitions and various approaches towards using eco-efficient construction materials. It presents and discusses possible ways of reducing the destructive effects on the environment by selecting and using green materials, review current literature and highlight the necessity of applying such materials in future constructions in all communities. This paper provides a base for this purpose that sustainable development communities and environment is realized by elimination of environmental pollution and approaching the criteria of green building by using sustainable materials.

• Journal of Environmental Health Sciences
• /
• v.49 no.6
• /
• pp.295-304
• /
• 2023

Background: Adolescents are relatively more sensitive than adults to exposure to indoor pollutants. The indoor air quality in classrooms where students spend time together must therefore be managed at a safe level because it can affect the health of students. Objectives: In this study, three types of green-wall models were applied to classrooms where students spend a long time in a limited space, and the resulting effects on reducing PM were evaluated. Methods: In the middle school classrooms which were selected as the experimental subjects, IoT-based indoor air quality monitoring equipment was installed for real-time monitoring. Three types of plant models (passive, active, and active+light) were installed in each classroom to evaluate the effects on improving indoor air quality. Results: The concentration of PM in the classroom is influenced by outdoor air quality, but repeated increases and decreases in concentration were observed due to the influence of students' activities. There was a PM reduction effect by applying the green-wall model. There was a difference in PM reduction efficiency depending on the type of green-wall model, and the reduction efficiency of the active model was higher than the passive model. Conclusions: The active green-wall model can be used as an efficient method of improving indoor air quality. Additionally, more research is needed to increase the efficiency of improving indoor air quality by setting conditions that can stimulate the growth of each type of plant.