• Title/Summary/Keyword: IT Efficiency

Search Result 24,602, Processing Time 0.042 seconds

A Study on the Optimal Conditions of the Biogas Sorting by Using the Polysulfone Membrane (다공성 분리막을 이용한 최적의 Bio-gas 분리인자 도출)

  • Lee, Seung-Won;Jeong, Chang-Hoon;Kim, Jung-Kwon
    • Journal of Environmental Science International
    • /
    • v.20 no.8
    • /
    • pp.1011-1019
    • /
    • 2011
  • The objective of this research is to evaluate optimal conditions of permeability and selectivity on the polysulfone membrane for efficiency of separation of $CH_4$ by checking four factors which are temperature, pressure, gas compositions and gas flow rates. When higher pressure was applied at the input, lower efficiency of recovery of $CH_4$ and higher efficiency of separation of $CH_4$ were shown. It has the tendency to show lower efficiency of recovery of $CH_4$ and higher efficiency of separation of $CH_4$ at the output as higher temperature at input. The lower flow rates make higher efficiency of recovery of $CH_4$ and lower efficiency of separation of $CH_4$. Finally, over 90% efficiency for $CH_4$ separation and recovery conditions are temperature ($-5^{\circ}C$), pressure (8 bar), gas composition rate (6:4) ($CH_4:CO_2$) and gas flow rate ($5\ell$/min). These conditions make higher separation and recovery efficiency such as 90.1% and 92.1%, respectively.

An Analysis on the Determinants of Efficiency of the Pharmaceutical Firms using Stochastic Frontier Analysis (Stochastic Frontier Analysis를 이용한 제약회사의 효율성과 그 결정요인분석)

  • Sakong, Jin;Kim, Jeongkyu
    • Health Policy and Management
    • /
    • v.25 no.2
    • /
    • pp.97-106
    • /
    • 2015
  • Background & Methods: The purpose of this research is to estimate the efficiency of the pharmaceutical firms and the determinants of their efficiency. Stochastic frontier analysis(SFA) and panel study are applied to the data of 60 domestic pharmaceutical firms from 2006 to 2012. Results & Conclusion: First, the result of the stochastic frontier analysis shows that overall efficiency of the pharmaceutical firms is increasing as time goes by. However, if firms are classified by the scale, the larger firms show more efficiency and if classified by the degree of innovativeness, the innovative firms show more efficiency compared to the non-innovative firms. This evidences show that the scale and R&D investment have significant relationships with the efficiency of the pharmaceutical firms. Therefore, it is necessary to increase the national level of investment for the fundamental researches to vitalize R&D of the new drugs. Second, the result of estimation of the determinants of efficiency shows that the firms with larger sales promotion expenses and entertainment expenses have less efficiency compared to the other firms. This can be explained by the structural characteristics of the small generic pharmaceutical firms. Therefore, the government had better make the pharmaceutical firms to reduce sales promotion and entertainment expenses and increase R&D expenses by introducing systems such as global budgeting system on medicine or reference pricing system.

Design of DC OPTIMIZER for Maximum Power Generation System of Solar Panel (태양광 패널의 최대 전력 발생 시스템을 위한 DC OPTIMIZER 설계)

  • Kim, Jeong Gyu;Yang, Oh
    • Journal of the Semiconductor & Display Technology
    • /
    • v.17 no.1
    • /
    • pp.40-44
    • /
    • 2018
  • In this paper, the efficiency of the solar system is lowered due to the partial shading such as the environmental factors of the solar panel. In order to solve this problem, a DC OPTIMIZER is proposed for a maximum power generation system of a photovoltaic panel. The proposed DC OPTIMIZER is composed of a buck structure that performs the maximum power point tracking (MPPT) control of each module of the solar panel, thus maximizing the efficiency. In order to verify the proposed DC Optimizer, the efficiency was measured by varying the irradiance using a solar simulator instead of the solar panel. As a result, it showed high efficiency characteristics as the maximum energy conversion efficiency was 99.3% at $800w/m^2$, $900w/m^2$, and the average efficiency was 99.06% excluding $100w/m^2$. The maximum efficiency of MPPT was 99.97% at $200w/m^2$, efficiency showed excellent performance.

Analysis of Bank Efficiency Between Conventional Banks and Regional Development Banks in Indonesia

  • ABIDIN, Zaenal;PRABANTARIKSO, R.Mahelan;WARDHANI, Rhisya Ayu;ENDRI, Endri
    • The Journal of Asian Finance, Economics and Business
    • /
    • v.8 no.1
    • /
    • pp.741-750
    • /
    • 2021
  • The research aims to analyze the level of efficiency by grouping banks during the period 2017 - 2018 into category 1 and category 2 banks and then dividing them as Regional Development Banks (BPD) and Non-BPD Conventional Commercial Banks (BUK) within each category. The research objects are banks within the categories BPD and BUK comprised 18 BPDs and 35 BUKs. The research methodology uses 3 stages, first, using Data Envelopment Analysis (DEA) we measure the level of bank efficiency; second, using the Tobit regression model we evaluate the effect of financial performance on DEA efficiency, and third, using the Mann-Whitney test we determine whether there is a difference in the efficiency of category 1 and 2 banks. The results showed that there was a decrease in the efficiency of category 1 and 2 banks but on average, the efficiency of category 1 banks is higher than category 2 banks. The estimation results of the Tobit regression model show that only the ROA variable affects the efficiency level of category 1 banks, while category 2 banks are influenced by NPL and ROA variables. In the Mann-Whitney test, it was proven that there were differences in efficiency between BUK and BPD in category 1 and 2 banks.

The Relation between Management Efficiency and Debt Ratio in Public Institutions (공공기관의 경영 효율성과 부채수준의 관련성에 관한 연구)

  • Jang, Ji Kyung;Yu, Soonmi
    • Journal of Korean Society for Quality Management
    • /
    • v.50 no.1
    • /
    • pp.139-151
    • /
    • 2022
  • Purpose: This study aims to delve into the empirical implications in management efficiency by analyzing the relation between management efficiency and debt ratio in public institutions. Methods: Based on 165 public institutions published in public business information system from 2016 to 2020, Data Envelopment Analysis(DEA) for estimating management efficiency was performed. This study analyzed the relationship between management efficiency and debt ratio using multi-regression analysis. It also examines how the relationship varies depending on the type of public institution. Results: The results of this study are as follows; We find that there is no significant relation between management efficiency and debt ratio. However, we find that this relationship can be different depending on the type of public institution. Management efficiency is negatively associated with debt ratio for quasi-market type public institutions. This negative relation tends to mitigate for market type public institutions, which suggests that management efficiency may convey differential implications depending on the type of business environment represented by the type of institution. Conclusion: The overall results suggest that the government needs to due caution in establishing a policy plan to reduce debt by increasing management efficiency, taking the specific business environment, particularly with regard the type of institution.

Study on the Improvement of Milling Recovery and Performance(I) -Operational Factors Affecting Rice Milling Performance- (도정수율과 성능향상을 위한 연구(I) -벼의 도정성능에 영향을 주는 작동요인-)

  • 정창주;류관희;박예린;이성범
    • Journal of Biosystems Engineering
    • /
    • v.5 no.2
    • /
    • pp.1-14
    • /
    • 1980
  • This study was carried out to investigate the effects of the counter-pressure setting and the roller speed of a rice whitening machine on the head rice recovery. milling capacity and milling efficiency, and also to find out the optimum operational conditions of the machine. The radial pressure inside the whitening chamber and the outlet axial pressure were measured to study their relationships with the head rice recovery, milling capacity and milling efficiency. The results of the study are summarized as follows. (1) The most important factor in rice whitening was the counter-pressure setting. It significantly affected the head rice recovery. (2) The roller speed significant affected the milling capacity and milling efficiency , but it did not affected the head rice recovery. (3) Both the radial pressure and the outlet axial pressure were affected by the counter-pressure setting but not by the roller speed. Both of them increased almost linearly with the counter-pressure setting. There was a significant correlation between the radial pressure and the outlet axial pressure. (4) The flow rate through the whitening chamber when the feed gate was fully opened increased with the roller speed, but it was not affected by the counter-pressure setting. (5) The head rice recovery decreased as the counter-pressure setting increased , but it was not affected by the roller speed. The reason could be explained by the fact that the radical pressure increased only with the counter-pressure setting. (6) The milling capacity increased with the counter-pressure setting and linearly with the roller speed. The milling efficiency generally increased with both the counter-pressure setting and the roller speed. However, the effect of roller speed was negligible at the higher counter-pressure setting. The temperature rise inside the whitening chamber was moderate with the mean of 11.3℃ (range 5.6-18.3℃) even though it increased slightly with the roller speed. Considering the head rice recovery and milling efficiency, the optimum operational conditions of the machine appeared to be the counter-pressure setting of 67g/㎠ and the roller speed of 1,050rpm. Neglecting the small difference in the head rice recovery , the greater milling capacity could be obtained at the counter-pressure setting of 85g/㎠ with the roller speed of 850-1050rpm.

  • PDF

Structure and Characteristics of Tandem Solar Cell Composed of Dye-sensitized Solar Cell and Thermoelectric Generator (염료감응형 태양전지와 열전발전소자를 결합한 복합 태양전지의 구조 및 특성)

  • Lee, Dong-Yoon;Song, Jae-Sung;Lee, Won-Jae;Kim, In-Sung;Jeong, Soon-Jong
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.18 no.4
    • /
    • pp.357-362
    • /
    • 2005
  • The tandem solar cell composed of a dye-sensitized solar cell (DSC) and a thermoelectric generator (TEG) was designed. In such new cell, the characteristics of DSC and TEG were investigated. DSC uses the wavelength range of 380∼750 nm and has the maximum efficiency of below 10 %. If the solar light transmitted through DSC can be converted to heat energy, TEG can generate electric energy using this heat energy. By this means, it is possible to utilize most of solar energy in the wavelength range of 350∼3000 nm for electric generation and it can be expected to obtain higher solar energy conversion efficiency exceeding the known limit of maximum efficiency. For this purpose we suggest the tandem solar cell constructed with DSC and TEG. In this structure, DSC has a carbon nanotube film as a counter electrode of DSC in order to collect the solar light and convert it to heat energy. We measured the I-V characteristics of DSC and TEG, assembled to the tandem cell. As a result, it was shown that DSC with carbon nanotube and TEG had the efficiency of 9.1 % and 6.2 %, respectively. From this results, it is expected that the tandem solar cell of the new design has the possibility of enhanced conversion efficiency to exceed above 15 %.

High Efficiency 5A Synchronous DC-DC Buck Converter (고효율 5A용 동기식 DC-DC Buck 컨버터)

  • Hwang, In Hwan;Lee, In Soo;Kim, Kwang Tae
    • Journal of Korea Multimedia Society
    • /
    • v.19 no.2
    • /
    • pp.352-359
    • /
    • 2016
  • This paper presents high efficiency 5A synchronous DC-DC buck converter. The proposed DC-DC buck converter works from 4.5V to 18V input voltage range, and provides up to 5A of continuous output current and output voltage adjustable down to 0.8V. This chip is packaged MCP(multi-chip package) with control chip, top side P-CH switch, and bottom side N-CH switch. This chip is designed in a 25V high voltage CMOS 0.35um technology. It has a maximum power efficiency of up to 94% and internal 3msec soft start and fixed 500KHz PWM(Pulse Width Modulation) operations. It also includes cycle by cycle current limit function, short and thermal shutdown protection circuit at 150℃. This chip size is 2190um*1130um includes scribe lane 10um.

Tourism Information Reservation System considering the Security and Efficiency (보안 및 효율성을 고려한 관광 예약 정보 시스템)

  • Kim, Taekyung
    • Journal of Korea Society of Digital Industry and Information Management
    • /
    • v.11 no.2
    • /
    • pp.67-72
    • /
    • 2015
  • As new Information technology such as IoT develops rapidly, a lot of changes are occurred in our lives. The Internet of Things is the network of physical objects or things embedded with electronics, software, sensors and connectivity to enable it to achieve greater value and service by exchanging data with the manufacturer, operator and/or other connected devices. This change is also applied to tourism industry. These days many people make a tour reservation using the internet. But it is required to consider the efficiency and security of tour reservation system. In this paper, we suggest a tour reservation system. First, we describe the computer reservation system, hotel reservation system and reservation system. Second, we perform the modeling of general reservation system and suggested reservation system. Third, performance evaluation is carried out with respect to efficiency and security. The results show that the suggested reservation system has a better performance than a general reservation system. At last we described the results and future works.

Investment Efficiency and Management Performance of Korean Regional Public Hospitals (지방공사의료원의 투자효율과 경영성과)

  • Ha, Au-Hyun;Kim, Yun-Jin;Cho, Duk-Young
    • The Korean Journal of Health Service Management
    • /
    • v.10 no.3
    • /
    • pp.1-12
    • /
    • 2016
  • Objectives : This study examined relations between investment efficiency and management performance as indexes related to productivity of Korean regional public hospitals. Methods : The analysis data are financial information of Korean regional public hospitals from 2011 to 2014. For the indicators, value added to total assets, value added to productive activity tangible fixed assets, and value added to personnel expenses, operating margin to revenues, net profit to total earnings, and ratio of value added. Results : Significant relevance was not shown among indicators of investment efficiency. However, Significant relevance was shown between value added to personnel expense and productivity per value added. Conclusions : It confirmed that outside support funds like subsidy did not have effect on improving the management performance. Also, it could be known that availability about input of capital and labor was not realized organically.