• Polymer(Korea)
• /
• v.30 no.3
• /
• pp.230-237
• /
• 2006

Copolymers(HSA-98-20, HSA-98-0, HSA-98+20) which we acrylic resin containing 80% solid content were synthesized by the reaction of monomers, including methyl methacrylate, n-butyl acrylate, and 2-hydroxyethyl acrylate with a functional monomer, acetoacetoxyethyl methacrylate (AAEM), which nay give improvements in cross-linking density and physical properties of films. The physical properties of prepared acrylic resins, containing AAEM, are as follows viscosities, $1420\sim5760cps$ ; number average molecular weight, $2080\sim2300g/mol$; polydispersity index, $2.07\sim2.19$ ; and conversions, $88\sim93%$. In the next step, high-solid coatings (HSA-98-20C, HSA-98-0C, HSA-98+20C) were prepared by the curing reaction between acrylic resins containing 80% solid content and isocyanate at room temperature. Various properties were examined on the film coated with the prepared high-solid coatings. The introduction of AAEM to the coatings enhanced the abrasion resistance and solvent resistance, which indicated the possible use of high- solid coatings for top-coating materials of automobile. Since the curing by viscoelastic measurement occurred in sequence of HSA-98+20C > HSA-98-0C > HSA-98-20C, it was concluded that the curing rates became faster with incresing $T_g$ values.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.1
• /
• pp.41-49
• /
• 2008

Many machineries and equipments are being changing to various and complicated by development of recent technology and arrival of convergence age in distant future. These various and complicate equipments need more precise outcomes and low-power consumption sensors to get close and exact results. In this paper, we proposed fault tolerance and feedback theorem for sensor network and MEMS circuit which has a benefit of energy efficiency through wireless sensor network. The system is provided with independent sensor communication if possible as unused action, using idle condition of system and is proposed the least number of circuits. These technologies compared system efficiency after examining product of each Moving Distance by developed sensor which gives effects to execution of system witch is reduced things like control of management side and requirement for hardware, time, and interaction problems. This system is designed for practical application; however, it can be applied to a normal life and production environment such as "Ubiquitous City", "Factory Automata ion Process", and "Real-time Operating System", etc.

• International Journal of Highway Engineering
• /
• v.16 no.6
• /
• pp.159-167
• /
• 2014

PURPOSES : The purpose of this study is to analyze the requirements of the road traffic safety moderator robot when road repairing. The road traffic safety moderator robot is road traffic safety equipment and to conversions mechanical engineering and IT when road repairing. METHODS : The study used AHP based on the survey from road repair related expert that field engineers, design engineers, public officials and professors. The survey used paired comparison. The survey items were safety, convenience and economics. The safety is classified as visibility or efficiency, the convenience is classified as utility or mobility and the economics is classified as initial investment cost or maintenance $ management cost. The survey alternatives were the road traffic safety moderator robot, traffic regulation by human, traffic regulation by mannequin and traffic signs. The software for AHP is Expert Choice 2000. RESULTS : The results of AHP analyze, the weighted value of safety was analyzed with the highest at 0.488 of survey items. The weighted value of convenience was analyzed at 0.295, the weighted value of economics was analyzed at 0.218. The results of the road traffic safety moderator robot, the weight value of efficiency and utility were analyzed with the highest at 0.284 and 0.259 of alternatives. The weighted value of initial investment cost and maintenance & management cost were analyzed with the lowest at 0.203 and 0.211 of alternatives. The consistency test results of each items, null hypothesis is rejected because the CR values were 0.000 respectively. Therefore, the study results are consistency. CONCLUSIONS : The result of this study, overall value of the road traffic safety moderator robot came off second-best of other alternatives. The road traffic safety moderator robot has been received highest praise by the result of the study as good road traffic safety equipment when road repairing because the weighted values of efficiency and utility were analyzed with the highest of survey items. The efficiency mean securing safety and the utility mean practical assistance when road repairing. The results of this study showed that the road traffic safety moderator robot will effective for traffic safety when road repairing. economics and visibility are that supplementation of the road traffic safety moderator robot because the weighted values of economics and visibility were analyzed with the lowest of survey items. The consistency test results are consistency because the CR values were 0.000 respectively.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.10
• /
• pp.957-964
• /
• 2010

The deactivated catalyzed diesel particulate filter-trap (DPF) was remanufactured by ultrasonic wave treatment with various prepared solutions, followed by active component re-impregnation, and the emission control performance and surface properties of remanufactured DPF were studied at various remanufacturing conditions. The proper ultrasonic wave cleaning time at various prepared solutions and optimal re-impregnation amounts of active component for the best emission control performance of DPF were investigated and its performance tests were also carried out with various temperatures for the conversions of CO, THC (total hydrocarbon) and PM (particulate matter) by catalytic reaction test unit using bypass gas from the diesel engine dynamo system. It was found that the emission control performance of DPF remanufactured with the high-temperature air washing, ultrasonic wave cleaning at acid/base solutions and active component re-impregnation method was recovered to 95% level of its activity compared to that of the fresh DPF, which was caused by removing the deactivating materials from the surface of the DPF, through the analyses of performance test and their surface characterization by Optical microscope, EDX, ICP, TGA, and porosimeter.

• Korean Journal of Poultry Science
• /
• v.16 no.3
• /
• pp.139-147
• /
• 1989

An experiment was carried out to investigate the effects of dietary energy levels and protein feeding systems on the performance of laying hens. Total 960 White Leghorn pullets were alloted in 10 treatments consisted of 1 metabolizable energy levels (2,900 and 2,600 kcal/kg) and 5 protein feeding systems (17-17-15%, 17-15-13%, 15-15-15%15-15-13% and 15-13-13% in phase I, II and/or III, respectively) from 20 to 80 weeks or age. As metabolizable energy level increased from 2,600 to 2.900 kcal/kg of diet, e99 Productions in phase I and II were not different but decreased in phase III. Egg weight was not different, but daily feed intake and viability were decreased in phase I, II and III. Feed conversions in phase I and II were improved but in phase III it was not different. On the other hand, as dietary Protein level increased from 13 to 17%, egg production and egg weight were increased, and feed conversion was improved , but daily feed intake and viability were not affected by the dietary protein level. For the laying period of 60 weeks, metabolizable energy level of 2,600 kcal/kg of diet and 17, 15 and 13% dietary protein levels in phase I, II and III, respectively, were considered to be adequate to support the optimum productivity.

• Applied Chemistry for Engineering
• /
• v.9 no.5
• /
• pp.742-748
• /
• 1998

Experiments have been conducted to investigate synergistic effects and mechanisms of the Alaskan subbituminous coal/polypropylene (PP). Coliquefaction of coal/PP gave the synergistic effect in yields by 17% compared to independent liquefactions of coal or PP at $430^{\circ}C$. To analyse coliquefaction mechanisms, the second and zeroth order kinetic models were developed for coal and PP conversions respectively. When the models were simulated to fit coliquefaction results, those represented results successfully with the correlation coefficient of 0.99. The amount of tetralin needed to liquefy unit mass of coa 1(${\beta}$) was also calculated using the developed model. According to the calculated results, $\beta$ increased from 0.4 to 1.0 as the coliquefaction temperature increased from $410^{\circ}C$ to $470^{\circ}C$. This indicated that tetralin lowered the molecular weight of oil produced, and this phenomenon was recognized by the GPC analyses. Furthermore, it was found that tetralin prohibited the liquefaction of PP when coal was not added. On the other hand, tetralin was believed to act as a hydrogen-donor solvent to coal rather than prohibit PP liquefaction during coliquefaction. Therefore, the liquefaction rate of PP increases and synergistic effects in oil yields are mainly due to the increase in PP liquefaction during coal/PP coliquefaction.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.883-891
• /
• 2017

For the preferential oxidation of CO contained in the fuel of polymer electrolyte membrane fuel cell (PEMFC), CuO-$CeO_2$ mixed oxide catalysts were prepared by the sol-gel and co-precipitation methods to replace noble metal catalysts. In the catalyst preparation by the sol-gel method, Cu/Ce ratio and hydrolysis ratio were changed. The catalytic activity of the prepared catalysts was compared with the catalytic activity of the noble metal catalyst($Pt/{\gamma}-Al_2O_3$). Among the catalysts prepared with different Cu/Ce ratios, the catalyst whose Cu/Ce ratio was 4:16 showed the highest CO conversion (90%) and selectivity (60%) at $150^{\circ}C$. As the hydrolysis ratio was increased in the catalyst preparation, surface area increased, and catalytic activity also increased. The highest CO conversions with the CuO-$CeO_2$ mixed oxide catalyst prepared by the co-precipitation method and the noble metal catalyst (1wt% $Pt/{\gamma}-Al_2O_3$) were 82 and 81% at $150^{\circ}C$, respectively, whereas the highest CO conversion with the CuO-$CeO_2$ mixed oxide catalyst prepared by the sol-gel method was 90% at the same temperature. This indicates that the catalyst prepared by the sol-gel method shows higher catalytic activity than the catalysts prepared by the co-precipitation method and the noble metal catalyst. From the CO-TPD experiment, it was found that the catalyst having CO desorption peak at a lower temperature ($140^{\circ}C$) revealed higher catalytic activity.

• Communications of Mathematical Education
• /
• v.36 no.1
• /
• pp.139-170
• /
• 2022

In relation to differentiated mathematics education, Russia has a longer experience in research and practice than Korea. The mathematics curriculum for 10-11 grades currently in use in Russia is a level-specific curriculum and consists of a basic level and an advanced level. And in Russia mathematics textbooks for 10-11 grades are also textbooks for each level. In this study, we analyzed basic level textbook and advanced level textbook written by the same author group among the textbooks 'Algebra and Introduction of Mathematical Analysis' of the 10th grade in Russia. To analyze the main learning contents and textbook descriptions that were added in advanced level the 'real numbers' and 'complex numbers' sections were studied. The main contents of basic and advanced level textbooks for 'functions', 'trigonometric functions', 'trigonometric equations', 'conversions of trigonometric expressions', and 'derivatives', which are included in both basic and advanced textbooks were compared and analyzed, and the descriptive characteristics of the definitions and theorems presented in the two levels of textbooks were also compared and analyzed. From the results of this study, it is expected that various information on the contents of various level textbooks of mathematics, the differences between textbooks for each level, and strategies for the composition of textbooks for various level can be accumulated.

• KDI Journal of Economic Policy
• /
• v.12 no.3
• /
• pp.153-172
• /
• 1990

The present paper investigates the potential value of strategic antitrust policy in an oligopolistic international market. The market is characterized by a non-cooperative Cournot-Nash equilibrium and by asymmetry in costs among firms in the world market. The model is useful for two reasons. First, it is important in the context of policy-making to examine the conditions under which it may be beneficial to relax antitrust law to enhance competitiveness. Second, the explicit derivation of the level of cost-saving required for a gain in total domestic surplus provides an empirical rule for excluding industries that do not satisfy the requirements for a socially beneficial antitrust exemption. Results of the analysis include a criterion that tells how the cost-saving and concentration effects of a merger offset each other. The criterion is derived from fairly general assumptions on demand functions and is simple enough to be applied as a part of the merger guidelines. Another interesting policy implication of our analysis is that promoting mergers would not be a beneficial strategy in a net importing industry where cost-saving opportunities are thin. Cost-saving domestic mergers are more likely to increase national welfare in exporting industries. The best candidate industries for application of strategic antitrust policy are those with the following characteristics: (i) a large potential for efficiency enhancement; (ii) high market concentration at the world but not the domestic level; (iii) a high ratio of exports to imports. Recently, many policymakers and economists in Korea have also come to believe that the appropriate antitrust policy in an era of increased foreign competition may actually be to encourage rather than to prohibit domestic mergers. The Industry Development Act of 1986 and the proposed bill for Mergers and Conversions in the Financial Industry of 1990 reflect this changing perspective on antitrust policy. Antitrust laws may burden domestic firms in the sense that they have a more constrained strategy set. Expenditures to avoid antitrust attacks could also increase costs for domestic firms. But there is no clear evidence that the impact of antitrust policy is significant enough to harm the competitiveness of domestic firms. As a matter of fact, it is necessary for domestic financial institutions to become large in scale in this era of globalization. However, the absence of empirical evidence for efficiency enhancement from mergers suggests caution in the relaxation of antitrust standards.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.1
• /
• pp.324-332
• /
• 2019

Most countries including Korea and Indonesia have strong policy for implementing biofuels like biodiesel. Shortage of the oil feedstock is the main barrier for increasing the supply of biodiesel fuel. In this study, in order to improve the stability of feedstock supply and lower the biodiesel production cost, the feasibility of biodiesel production using two types of Indonesian tropical crop oils, pressed at different harvesting times, were investigated. R. Trisperma oils, a high productive non-edible feedstocks, were investigated to produce biodiesel by esterification and transesterification because of it's high impurity and free fatty acid contents. the kindly provided oils from Indonesia were required to perform the filtering and water removal process to increase the efficiency of the esterificaton and transesterification reactions. The esterification used heterogeneous acid catalyst, Amberlyst-15. Before the reaction, the acid value of two types oil were 41, 17 mg KOH/g respectively. After the pre-esterification reaction, the acid value of oils were 3.7, 1.8 mg KOH/g respectively, the conversions were about 90%. Free fatty acid content was reduced to below 2%. Afterwards, the transesterification was performed using KOH as the base catalyst for transesterification. The prepared biodiesel showed about 93% of FAME content, and the total glycerol content was 0.43%. It did not meet the quality specification(FAME 96.5% and Total glycerol 0.24%) since the tested oils were identified to have a uncommon fatty acid, generally not found in vegetable oils, ${\alpha}$-eleostearic acid with much contents of 10.7~33.4%. So, it is required to perform the further research on reaction optimization and product purification to meet the fuel quality standards. So if the biodiesel production technology using un-utilized non-edible feedstock oils is successfully developed, stable supply of the feedstock for biodiesel production may be possible in the future.