• Clean Technology
• /
• v.16 no.4
• /
• pp.265-271
• /
• 2010

The deactivated diesel oxidation catalyst(DOC) was remanufactured by ultrasonic wave treatment with various solutions, followed by active component re-impregnation. The catalytic performance and surface properties of remanufactured DOC were studied at various remanufacturing conditions. The proper ultrasonic-wave cleaning time at various solutions and optimal re-impregnation amounts of active component for the best catalytic performance were investigated. The catalytic performance tests on the conversions of CO and THC(total hydrocarbon) were also carried out at various temperatures by catalytic reaction test unit using bypass gas from the diesel engine dynamo system. It was found that the catalytic performance of DOC remanufactured with the high-temperature air washing, ultrasonic wave cleaning at acidic/basic solutions and active component re-impregnation method was recovered to 90% level of its activity compared to that of the fresh DOC, which was caused by removing the deactivating materials from the surface of the DOC through the analyses of catalyst performance test and their characterization by Optical microscope, EDX, ICP, TGA, and porosimeter.

• New & Renewable Energy
• /
• v.19 no.4
• /
• pp.2-10
• /
• 2023

The current mandatory domestic biodiesel blending ratio is 3.5%, which is planned to be gradually increased to achieve carbon neutrality by 2050. The aim of this study was to improve domestic self-sufficiency in biodiesel raw oil by conducting a technical review on the possibility of utilizing waste oils, such as soup oil, chicken oil, and leather oil, as biodiesel feedstocks. These waste oils have an acid value that is too high to be converted directly into biodiesel. Therefore, a pretreatment to reduce the acid value is necessary. The neutralization process was examined as a potential technology for reducing the acid value. The oil recovery rate of the soup oil after neutralization was significantly low at 37.6 wt%. The oil recovery rates of leather oil and chicken oil were 66.49 wt% and 79.08 wt%, respectively. Based on biodiesel conversion experiment using waste oil with a reduced acid value, the conversions were analyzed as 89 wt%, 91.1 wt%, and 90.5 wt% for soup oil, leather oil, and chicken oil, respectively. Thus, it is technically possible to use soup oil, leather oil, and chicken oil as raw materials for producing biodiesel.

• Journal of Practical Engineering Education
• /
• v.16 no.1_spc
• /
• pp.95-103
• /
• 2024

With the rapid decline of the school-age population, the competition for admissions has increased and marketing through digital channels has become more important, so universities are investing more resources in online promotion and communication to recruit new students. This study uses Google Analytics, a web log analysis tool, to track the visitor behavior of a university admissions website and establish a digital marketing strategy based on it. The analysis period was set from July 1, 2023, when Google Analytics 4(GA4) was integrated, to January 10, 2024, when the college admissions process was completed. The analysis revealed interesting patterns such as geographical information based on visitors' access location, devices(operating systems) and browsers used by visitors, acquisition channels through visitors traffic, conversions on pages and screens that visitors engaged with and visitor flow. Based on this study, we expect universities to find ways to strengthen their admission promotion through digital marketing and effectively communicate with applicants to gain a competitive edge.

• Journal of Ginseng Research
• /
• v.47 no.5
• /
• pp.638-644
• /
• 2023

Background: The anti-platelet activity of the saponin fraction of Korean Red Ginseng has been widely studied. The saponin fraction consists of the panaxadiol fraction (PDF) and panaxatriol fraction (PTF); however, their anti-platelet activity is yet to be compared. Our study aimed to investigate the potency of anti-platelet activity of PDF and PTF and to elucidate how well they retain their anti-platelet activity via different administration routes. Methods: For ex vivo studies, Sprague-Dawley rats were orally administered 250 mg/kg PDF and PTF for 7 consecutive days before blood collection via cardiac puncture. Platelet aggregation was conducted after isolation of the washed platelets. For in vitro studies, washed platelets were obtained from Sprague-Dawley rats. Collagen and adenosine diphosphate (ADP) were used to induce platelet aggregation. Collagen was used as an agonist for assaying adenosine triphosphate release, thromboxane B2, serotonin, cyclic adenosine monophosphate, and cyclic guanosine monophosphate (cGMP) release. Results: When treated ex vivo, PDF not only inhibited ADP and collagen-induced platelet aggregation, but also upregulated cGMP levels and reduced platelet adhesion to fibronectin. Furthermore, it also inhibited Akt phosphorylation induced by collagen treatment. Panaxadiol fraction did not exert any antiplatelet activity in vitro, whereas PTF exhibited potent anti-platelet activity, inhibiting ADP, collagen, and thrombin-induced platelet aggregation, but significantly elevated levels of cGMP. Conclusion: Our study showed that in vitro and ex vivo PDF and PTF treatments exhibited different potency levels, indicating possible metabolic conversions of ginsenosides, which altered the content of ginsenosides capable of preventing platelet aggregation.

• Elastomers and Composites
• /
• v.19 no.1
• /
• pp.13-31
• /
• 1984

The purposes of this dissertation are to demonstrate that DSC theromoanaytical methods of vulcanization can provide useful informations on the vulcanization characteristics of industrial formulations and also provides the potential basis for a rapid and complete method of sulfur and vulcanizing accelerator analysis for quality control. The influences of those factors such as heating rate, scan temperature, vucanizing accelerator's type and concentration upon vulcanization exotherm in NR and NBR compounds in the presence of vulcanizing accelerators such as TMTD,MBTS,DPG,TMTM,CBS, and MBT were evaluated by means of DSC. In order to examine the credibility in the DSC method, the same samples which were used for DSC method were studied to compare the DSC results with the ODR (Oscillating Disk Rheometer) data. The results obtained were as follows 1. In the DSC dynamic experiments, the observed enthalpy results from vulcanization depends upon the heating rate; In the range of 2 to $20^{\circ}C/min$ of heating rate, as the heating rate was increased the enthalpy change was also increased. However, over the heating rate of $30^{\circ}C/min$ it was observed that the enthalpy change was decreased as the heating rate was further increased. Without regard to the change of enthalpy, tremendous instantaneous heat evolving was observed in the range of high heating rates. 2. For the samples which are added with various vulcanizing accelerators, the activation energies of vulcanization were as follows; 3. Regarding to the influences of vulcanizining accelerator's types upon the characteristics of vulcanization exotherm, NR and NBR compounds in the presence of thiuramsulphide compounds type accelerators such as TMTD, TMTM, were exhibited sharper and higher vulclanization exotherm than others. From the resuts of DSC thermograms which was distributed in even shape in the broad temperature range, it was clearly shown that the guanidine compounds type accelerator such as DPG acts as a delayed acting accelerator. 4. In the comparison of DSC and ODR results, the dependency of temperature in the cure rate and the observed conversions show good agreements between two results. 5. In the same curatives, by the comparison of glass transition temperatures, it was possible to predict relative values of maximum torques. Consequently, from the present studies, it is shown that the DSC thermoanalytical method can provide an alternate new method for rapid and complete quality control analysis of rubber industry.

• The Journal of the Korea Contents Association
• /
• v.12 no.4
• /
• pp.186-197
• /
• 2012

The purpose of the thesis is to answer the question on how the visual image content, being the original content, should be adapted to and represented as a spatial content. The thesis focuses on adaptation as the key in the conversion process of visual image content to a themed space. There are many published studies dealing with storytelling, adaptation from books to movies and TV shows, or from movies to games and vice versa. On the contrary, when it comes to adaptation from visual image content to spatial content, noticeably few studies were done on the method, and fewer studies view adaptation as the prior step of storytelling. This study first defines adaptation, and then applies the methods of Gianetty and Dudley which is further incorporated into the conversion of visual image content into a themed space. It then turns the attention to the characteristics of themed spaces. A case study highlights that a themed space is a spatial representation of the story, image and action in the visual image content, and analyze the type of adaptation made. The study results draws two conclusions; adaptation must be carried out prior to the storytelling of the spatial content; and opposed to a third-person view of the visual image content, the main factor in a themed space is first-hand experience. Thus, the thesis suggests that conversion from visual image content to themed spaces are not merely imitative but is a full range of recreation of a new content. It is expected that more detailed analyses on the particulars will lead to feasible outcome on implementing various methods of adaptation and bring about effective conversions between the visual image contents and themed spaces.

• Polymer(Korea)
• /
• v.25 no.3
• /
• pp.359-366
• /
• 2001

Isothermal physical aging of a glass fiber/epoxy composite was examined at different aging temperatures ($T_a$) and degrees of conversion (monitored by the glass transition temperature, $T_g$) by means of the TBA torsion pendulum technique. The range of aging temperature was from 10 to $130^{\circ}C$ : the conversion was systematically changed from $T_g$=$76^{\circ}C$ to $T_g$=$177^{\circ}C$ (fully crosslinked). The effect of isothermal physical aging was manifested as perturbations of the modulus and mechanical loss vs. temperature in the vicinity of $T_a$ for all conversions. The rate of isothermal physical aging determined from the change of modulus with aging time at fixed aging temperature decreased and then increased with increasing conversion below T$_{a}$=9$0^{\circ}C$. There exists a superposition in aging rate vs. ($T_g$ -$T_a$) by shifting horizontally and vertically. This implies that the physical aging process is independent of the change of chemical structure as conversion proceeds. It has been found that water absorbed at the aging temperature below $70^{\circ}C$ during isothermal physical aging lowers the apparent aging rate. It is due to the absorbed water molecules forming strong polar interactions with hydroxyl group on network chain and reducing the segmental mobility during the physical aging.g.

• Journal of Ginseng Research
• /
• v.46 no.3
• /
• pp.348-356
• /
• 2022

Background: Gintonin is a ginseng-derived exogenous G-protein-coupled lysophosphatidic acid (LPA) receptor ligand. Gintonin exerts its neuronal and non-neuronal in vitro and in vivo effects through LPA receptor subtypes. However, it is unknown whether gintonin can bind to the plasma membrane of cells and can transactivate the epidermal growth factor (EGF) receptor. In the present study, we examined whether gintonin-biotin conjugates directly bound to LPA receptors and transactivated the EGF receptor. Methods: We designed gintonin-biotin conjugates through gintonin biotinylation and examined whether gintonin-biotin conjugate binding sites co-localized with the LPA receptor subtype binding sites. We further examined whether gintonin-biotin transactivated the EGF receptor via LPA receptor regulation via phosphor-EGF and cell migration assays. Results: Gintonin-biotin conjugates elicit [Ca²⁺]_i transient similar to that observed with unbiotinylated gintonin in cultured PC3 cells, suggesting that biotinylation does not affect physiological activity of gintonin. We proved that gintonin-biotin conjugate binding sites co-localized with the LPA1/6 receptor binding sites. Gintonin-biotin binding to the LPA1 receptor transactivates the epidermal growth factor (EGF) receptor through phosphorylation, while the LPA1/3 receptor antagonist, Ki16425, blocked phosphorylation of the EGF receptor. Additionally, an EGF receptor inhibitor AG1478 blocked gintonin-biotin conjugate-mediated cell migration. Conclusions: We observed the binding between ginseng-derived gintonin and the plasma membrane target proteins corresponding to the LPA1/6 receptor subtypes. Moreover, gintonin transactivated EGF receptors via LPA receptor regulation. Our results suggest that gintonin directly binds to the LPA receptor subtypes and transactivates the EGF receptor. It may explain the molecular basis of ginseng physiology/pharmacology in biological systems.

• Korean Chemical Engineering Research
• /
• v.55 no.5
• /
• pp.679-684
• /
• 2017

The influence of catalytic activity on Fe loading methods over Fe/BEA zeolite catalyst in the simultaneous reduction of $N_2O/NO$ has been studied. The Fe/BEA zeolite catalysts were prepared by ion exchange and impregnation. Catalytic tests were carried out in the selective catalytic reduction using ammonia as a reductant to identify the activity of prepared catalysts. The results show that the ion exchanged catalyst exhibited higher NO and $N_2O$ conversions than the impregnated catalysts did. To investigate the difference in catalytic activity, we performed various analyses such as XRD, $H_2-TPR$, $O_2-TPD$ and XPS. It is considered that the increase in the activity of the ion exchange catalyst is due to improved reducibility and increased oxygen desorption rate. In addition, the ion exchange catalyst was found through the XPS analysis that $Fe^{2+}$, which is related to the catalytic activity, is formed about 1.6 times more than the impregnated catalyst.

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.1070-1078
• /
• 1998

Thermodynamic analysis on carbon dioxide reforming of methane was performed using a computer program which can handle condensed species in the products, and the reforming experiments were conducted over $Al_2O_3$, $La_2O_3$, ZSM-5, MCM-41, KIT-1 supported nickel catalysts, and a commercial ICI 46-1. It was estabished that a system which consists of $CH_4$, $CO_2$, CO, $H_2$, $H_2O$, and C is appropriate for theoretical equilibrium calculations and addition of water vapor or oxygen was found to diminish the contribution of carbon dioxide in reforming. Silicate molecular sieve-supported catalysts such as Ni/ZSM-5, Ni/MCM-41, Ni/KIT-1 were effective for high $CH_4$ and $CO_2$ conversions as well as for high CO yield. Coke formation was suppressed when CaO was added as a promoter. Ni/Ca/KIT-1 which contains 10% Ni with 3% Ca showed conversion approaching equilibrium levels above $650^{\circ}C$ and maintained constant activity over 20 h. Despite increased space velocity, relatively high conversion and CO yield were observed.