• Korean Journal of Health Education and Promotion
• /
• v.20 no.1
• /
• pp.131-145
• /
• 2003

This study was conducted to estimate the incidence and the degree of cigarette smoking and drinking among working men, and then to investigate the effects on blood pressure, various hematological indices and blood chemistry. The sample consisted of 2,287 male workers who had undertaken a general health check-up during the two-year period from January, 2000 to December, 2001. Such factors as blood pressure, blood glucose, lipid profiles, and liver function tests were determined and then analyzed with respect to the subjects smoking and/or drinking status. The major findings from this study are: 1. The drinking and smoking status have shown that 52.7% of participants were in the habit of both drinking and smoking while 11.6% were not associated with either. On the other hand 25.4% were involved only in drinking and 10.2% only in smoking. In the group smoking over 21 cigarettes per day over 30, the age group occupied the largest proportion at 20.1%. 2. Regarding the relationship between smoking and/or drinking status, and blood pressure, hematology and blood chemistry, the smoking and/or drinking group had significantly higher levels of blood pressure, both systolic and diastolic, Hb & Hct, TG, LDL-C, SGOT, and ${\gamma}$-GTP, than the non-smoking and/or non-drinking group. But HDL-C was significantly lower in the smoking group and significantly higher in the drinking group than the non-smoking/non-drinking group. 3. Regarding amount smoked, a larger number of cigarettes per day was significantly associated with the higher levels of blood pressure, systolic and diatolic, TG, TC, LDL-C, Hb, Hct, and ${\gamma}$-GTP. As for the amount druck, an increasing amount of alcohol intake was associated with rising levels of blood pressure, systolic and diatolic, TG, TC, LDL-C, HDL-C, Hb, SGOT, and ${\gamma}$-GTP. 4. Regarding the correlation among all the variables stated above, the smoking and drinking amount was shown to be in the positive correlation with blood pressure, both systolic and diastolic, TG, TC, Hb, and ${\gamma}$-GTP. On the contrary, LDL-C and HDL-C was in a positive correlation only with the amount drunk amount, and Hct only with the amount smoked. 5. As with systolic and diastolic blood pressure, the odds ratio of the smoking group was 2.35 and 2.58 compared to the non-smoking/drinking group. whereas it was 1.47 and 1.75 in the smoking/drinking group. Concerning serum lipids, the smoking/drinking group had 1.97 times the levels of TG in the non-smoking/non-drinking group, though the smoking group had 1.55 times the levels of HDL-C in the non-smoking/non-drinking group. As with liver function test results, the drinking group had 2.50 times and the smoking/drinking group had 4.41 times the levels of ${\gamma}$-GTP in the non-smoking/drinking group. respectively. The above results revealed that smoking and alcohol intake were effected the results of blood pressure and laboratory tests. Specifically, not only the smoking/drinking group but also those only smoking or only drinking were not as desirable as the non-smoking and non-drinking group to the results of blood pressure and laboratory tests.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.1
• /
• pp.25-38
• /
• 2010

This study aims to, first, classify the approach system of utilizing national and local amenities into three groups: evaluation of the level of the amenity, evaluation of the value of amenity resources, and utilization of amenity resources. Secondly, the study aims to derive an evaluation index which is required according to the approach system. As for a strategy of utilizing amenities, the self-diagnosis based on the evaluation of the level of local amenities is required. In this study, three sectors, ten items and 43 detailed items have been derived though specialists, FGIs(Focus Group Interview), and the cases within and outside of the country. In the survey with specialists, a unit-space key index which can be used in accordance with the unit-space characteristics(such as urban and rural area, fishing villages, mountain villages, and littoral areas), environmental area, important index and optional index have been derived. As for the evaluation index which is needed for the development of typical local amenities resources, 14 detailed evaluation indexes from three sectors have been derived. These have been classified again into six key indexes, six important indexes and two optional indexes. In the evaluation index of amenity resources, natural and environmental value-such as ecological value of preservation, uniqueness of aesthetic landscape and ecological value of restoration-historic and cultural value of preservation and individuality of the resources, and aesthetic and cultural values are derived as being important. As for utilization of amenity resources, 15 items from three sectors-such as reservation, restoration, intentional use, and industrial use-have been derived. Also, through a survey with specialists, key indexes and important indexes were derived by unit-space. As a result, in urban areas, seven items-including creative development of space, aesthetic landscape control and development of cultural contents-have been derived as key indexes; in rural areas, mountain villages, fishing villages and littoral areas, eight items-including brand of region, brand of the products, and brand of tourism resources-have been derived. In environmental areas, six items-including reservation of natural resources, historic and cultural heritage, and restoration of ecosystem-have been derived. Indexes derived from this study can be utilized in order to establish a strategy for amenity plans and an implementation strategy, but can be readjusted, allowing for various regional characteristics. It is, thus, advisable that local governments selectively utilize indexes according to regional characteristics or newly develop them for the maximum utilization of regional amenities.

• 대한공업교육학회지
• /
• v.41 no.2
• /
• pp.48-68
• /
• 2016

This study was conducted to identify the NCS-related research trends, Keywords, the Keywords Networks and the extension of the Keywords using the sementic network analysis and to seek for the development plans about NCS. For this, the study searched 345 the papers, with the National Competency Standards or NCS as a key word, among master's theses, dissertations and scholarly journals that RISS provides, and selected a total of 345 papers. Annual frequency analysis of the selected papers was carried out, and Semantic Network Analysis was carried out for 68 key words which can be seen as key terms of the terms shown by the subject. The method of analysis were KrKwic software, UCINET6.0 and NetDraw. The study results were as follows: First, NCS-related research increased gradually after starting in 2002, and has been accomplishing a significant growth since 2014. Second, as a result of analysis of keyword network, 'NCS, development, curriculum, analysis, application, job, university, education,' etc. appeared as priority key words. Third, as a result of sub-cluster analysis of NCS-related research, it was classified into four clusters, which could be seen as a research related to a specific strategy for realization of NCS's purpose, an exploratory research on improvement in core competency and exploration of college students' possibility related to employment using NCS, an operational research for junior college-centered curriculum and reorganization of the specialized subject, and an analysis of demand and perception of a high school-level vocational education curriculum. Fourth, the connection forming process among key words of domestic study results about NCS was expanding in the form of 'job${\rightarrow}$job ability${\rightarrow}$NCS${\rightarrow}$education${\rightarrow}$process, curriculum${\rightarrow}$development, university${\rightarrow}$analysis, utilization${\rightarrow}$qualification, application, improvement${\rightarrow}$plan, operation, industry${\rightarrow}$design${\rightarrow}$evaluation.'

• Korean Chemical Engineering Research
• /
• v.45 no.1
• /
• pp.57-66
• /
• 2007

Natural gases generally consist of mainly $^{12}C$ and about 1.1% of $^{13}C$. It is well known that a stable carbon isotope, $^{13}C$, has been widely used for the applications of medical, pharmaceutical, and agricultural tracers. As a result, the development of the separation and concentrating technology of $^{13}C$ can cause of high value-added products and the possibility of the generation of new carbon materials, In general, there are two kinds of approaches to obtain a stable $^{13}C$ isotope by the separation of cryogenic distillation. One is to obtain a concentrated $^{13}CH_4$ isotope from natural gas. Another approach is to get concentrated $^{13}CO$ by distillation followed by a chemical reaction of $CH_4$ and $H_2O$. In this study, rigorous process simulations of the cryogenic distillation have been performed and analyzed for the concentrated separation of $^{13}C$ isotopes from LNG and NG by using commercial process simulator. Due to the very small differences of relative volatilities and separabilities of $^{12}C$ and $^{13}C$, the process design and operation of effective separation and concentration of $^{13}C$ need special strategies and feasibility studies. Utilization of vapor pressure data to acentric factor in SRK equation of state and optimized process conditions have been able to predict for the effective of the separation yield and concentration of $^{13}C$ for the cryogenic distillation. The various operation strategies for both batch and continuous cryogenic distillation are also studied and suggested for the basic design of the process. Development of this study can provide a tool for the effective design and operation of the cryogenic separation of $^{13}C$.

• Clean Technology
• /
• v.13 no.2
• /
• pp.143-150
• /
• 2007

The objective of this study is to develop hydrocarbon-based cleaning agents by blending paraffins, glycol ethers and siloxanes in oder to effectively clean contaminants such as flux, solder and grease. And the effect of cleaning ability by wetting index, aniline points and solubility parameter of the formulated hydrocarbon-based cleaning agents were studied in this work. The formulated hydrocarbon-based cleaning agents were prepared on the base of physical properties of their individual components. Wetting indexes and aniline points of their were measured through experiments and solubility parameters of their were calculated based on the Hansen's equation. In this study, evaluation of cleaning ability by cleaning agents were carried out using contaminants such as flux, solder, and grease. The experimental results showed that the cleaning ability of the formulated cleaning agents was excellent in cleaning contaminants such as flux, solder and grease and that the influencing parameters on their cleaning efficiency were found to be different according to contaminant types. MC($20.3MPa^{1/2}$), DF-1 ($24.2MPa^{1/2}$) and DF-2($21.5MPa^{1/2}$) with similar solubility parameter as flux ($21.3MPa^{1/2}$) showed 100% cleaning efficiency within 3 minutes in flux cleaning. And CFC-113, MC and 1,1,1-TCE with low aniline point less than $-20^{\circ}C$ showed excellent cleaning efficiency in solder cleaning. DG-1($16.2\;MPa^{1/2}$) and DG-2($15.5\;MPa^{1/2}$) with similar solubility parameter as grease($15.0{\sim}17.0\;MPa^{1/2}$) showed relatively low cleaning efficiency of grease, but CFC-113 and MC with high wetting index and low aniline point showed good cleaning efficiency in grease cleaning. As a result of this study, the hydrocarbon-based cleaning agents alternative to regulated cleaning agents such as CFC-113, 1,1,1-TCE and MC were able to be developed through properly blending paraffins, glycol ethers and siloxanes for cleaning flux, solder and grease. And it can be shown that various influencing parameters of cleaning efficiency such as wetting index, aniline point, solubility parameter and etc. of the non-aqueous cleaning agent should be reviewed for prediction of their cleaning ability and can be applied to formulation of cleaning agents.

• Management & Information Systems Review
• /
• v.36 no.3
• /
• pp.219-237
• /
• 2017

Looking into the top-five innovative sectors in Korea's manufacturing and service industries, this study empirically analyzes the effect of innovation performance on R&D investment, which is one of the most important strategic decisions for corporate management. In the midst of an uncertain business environment, R&D investment has been regarded as the most important strategic decision making in corporate management related to innovation. Corporate management, however, tend to be reluctant to make sufficient R&D investment due to the risk of an investment failure. Therefore, having R&D investment by offsetting this risk has been deemed as a key task for corporate management. However, prior studies have failed to identify which factors affect companies' strategic decision making on R&D investment. This study is to remedy this weakness of prior study. Relying on path dependency theory at organization-level and dominant logic at individual-level, this study empirically examines the multiple regression model, which sees entrepreneurial orientation as a positive mediator between innovation performance and R&D investment. The results found in the analysis of 242 local companies in the manufacturing and service sectors represent that innovation performance has a direct and positive effect on R&D investment, while it indirectly affects R&D investment through the mediating roles of entrepreneurial orientation. They also revealed that innovation performance had a meaningful impact on entrepreneurial orientation, which is an inclination to seek innovation, led to R&D investment. The founding of this study imply that innovation performance in the past affects innovation strategies in the future, and such a relationship could be strengthened by entrepreneurial orientation as the dominant logic of corporate management.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.12 no.4
• /
• pp.145-157
• /
• 2017

SMEs play an important role in the domestic economy. Regarding competency to respond flexibly to unpredictable changes, agility of SMEs is more emphasized. Entrepreneurship orientation is an important factor in the source of SMEs that enable such competency. Entrepreneurial orientation refers to the tendency of a CEO or a member of a corporation to be innovative, risk-taking, and active in the face of various market opportunities. In other words, it refers to the tendency to be expressed in the activities of the entire company without regard to specific technologies or industries. Entrepreneurial orientation has a direct or indirect effect on business performance. Therefore, in this study, we conducted theoretical and empirical studies on the effect of entrepreneurial orientation of SME managers on business performance. Research hypotheses were derived through theoretical research. We focused on the mediating effect of innovation activity and tried to identify the mechanism that entrepreneurial orientation leads to business performance through product innovation and service innovation activity. We investigated whether innovativeness, proactiveness, and risk-taking, which are sub-variables of entrepreneurial orientation, affect business performance through product innovation and service innovation. We conducted a survey of SMEs in Busan and Kyungnam regions to examine the research hypotheses. The results show that product innovation and service innovation have mediating effects. The results of the study are as follows. Product innovation has mediating effect of innovativeness and risk-taking on business performance. Service innovation has been found to mediate innovativeness, proactiveness, and risk-taking on business performance. There was a difference in the mediation effect between the two innovations. Product innovation showed a low mediating effect and a large direct effect. On the other hands, service innovation is relatively more mediating than product innovation. The implications of the research results are derived in relation to the essential differences between product innovation and service innovation. Limitations of the study and directions for future research are presented.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.2
• /
• pp.159-165
• /
• 2004

This study described about method that forms liquid crystal gel (LCG) by main ingredient with hydrogenated lechin (HL) in O/W emulsion system. Result of stability test is as following with most suitable LCG's composition. Composition of LCG is as following, to form liquid crystal, an emulsifier used 4.0wt% of cetostearyl alcohol (CA) by 4.0wt% of HL as a booster. Moisturizers contained 2wt% of glycerin and 3.0wt% of 1,3-butylene glycol (1,3-BG). Suitable emollients used 3.0wt% of cyclomethicone, 3.0wt% of isononyl isononanoate (ININ), 3.0wt% of cerpric/carprylic triglycerides (CCTG), 3.0wt% of macademia nut oil (MNO) in liquid crystal gel formation. On optimum conditions of LCG formation, the pHs were formed all well under acidity or alkalinity conditions (pH=4.0-11.0). Considering safety of skin, pH was the most suitable 6.0${\pm}$1.0 ranges. The stable hardness of LCG formation appeared best in 32 dyne/$\textrm{cm}^2$. Particle of LCG is forming size of 1-20$\mu\textrm{m}$ range, and confirmed that the most excellent LCG is formed in 1-6$\mu\textrm{m}$ range. According to result that observe shape of LCG with optical or polarization microscope, LCG could was formed, and confirmed that is forming multi -layer lamellar type structure around the LCG. Moisturizing effect measured clinical test about 20 volunteers. As a result, moisturizing effect of LCG compares to placebo cream was increased 36.6%. This could predicted that polyol group is appeared the actual state because is adsorbed much to round liquid crystal droplets to multi-lamellar layer's hydrophilic group. It could predicted that polyol group is vast quantity present phase that appear mixed because is adsorbed to round liquid crystal to multi-lamellar layer's hydrophilic group. This LCG formation theory may contribute greatly in cosmetics and pharmacy industry development.

• Journal of Service Research and Studies
• /
• v.9 no.3
• /
• pp.39-60
• /
• 2019

The purpose of this study is to analyze the determinants of insurance product cross selling performance. For the study, 11 insurance managers and 2 sales managers belonging to A insurance agency were selected and in-depth interviews were conducted. The analysis of the research data was done by the open coding method suggested by Strauss & Corbin(2001). As a result, 84 concepts, 28 subcategories and 10 categories were derived. The ten categories that were determinants of insurance product cross-selling performance were personal characteristics, consultation method, cross-selling ratio, sales culture, education, customer change, customer DB provision, satisfaction, business support system, and customer service. In order to verify the qualitative results, quantitative analysis was emplyed to the actual performance data of insurance planners belonging to A insurance agency during April 2016~March 2019. As a result of the analysis, the age, position, and the number of months worked in the insurance company had a statistically significant effect on the number of life insurance contracts in total insurance contracts and life insurance contracts in total insurance contracts. In addition, the age, position, and the number of months worked in the insurance company had a statistically significant negative impact on the number of non-life insurance contracts in the total number of insurance contracts and the total amount of insurance contracts in total insurance contracts. The result of this study can be an important basic data for the development of educational programs and job support systems for the training of insurance planners. Insurance companies should refer to ten categories derived from qualitative research in order to increase the performance of insurance planners and to promote long-term service. Especially, it is necessary to develop specialized education programs and job support systems so that cross sales that increase the proportion of life insurance sales increase.

• Food Science and Preservation
• /
• v.19 no.3
• /
• pp.413-419
• /
• 2012

Fermentation of ice apple wine from freeze-concentrated Fuji apple juice to 36 $^{\circ}Brix$ was carried out using Saccharomyces cerevisiae SS89, a sugar-tolerant wine yeast strain. The characteristics of the fermentation and the properties of ice apple wine were compared with those of S. cerevisiae W-3, an industrial wine yeast that was used as a control in this study. During the fermentation, the alcohol content increased more rapidly by S. cerevisiae SS89 together with the decrease of the soluble solid content, compared to S. cerevisiae W-3. It reached 12% (v/v) after 15 days of fermentation by S. cerevisiae SS89 (12.4%, v/v) and 21 days by S. cerevisiae W-3 (12.6%, v/v). The soluble solid contents of the SS89 and W-3 wines were 24.0 and 23.6 $^{\circ}Brix$, respectively. Lactic acid was detected at the highest level, followed by malic aid, among the organic acids in both wines. No big differences in the organic acid contents were observed based on the strains. In the SS89 wine, higher levels of methanol, propanol, butanol, and isoamyl alcohol were detected, together with a lower isobutanol content, compared with the W-3 wine. The SS89 wine showed higher level of intensity as well as higher Hunter's L and b color values compared to the W-3 wine. In the sensory evaluation, similar scores in color, flavor, taste, and overall preference were obtained in the two wines. Therefore, S. cerevisiae SS89 was thought to be useful for the rapid fermentation of ice apple wine.