• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.23-24
• /
• 2020

In this study, the concrete compressive strength estimation system Concrete IoT Management System (hereinafter referred to as CIMS) was developed, and CIMS was applied to domestic field structure slabs and wall concrete to check whether CIMS is practically available and to estimate the accuracy of the initial strength estimation of concrete. As a result, it shows a very high correlation when the compressive strength of the specimen for structural management is compared with the estimated strength of CIMS in terms of integrated temperature, and it is expected to be gradually applied to domestic construction sites in the future.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.25-26
• /
• 2020

In this study, by applying the concrete compressive strength estimation system Concrete IoT Management System (hereinafter referred to as CIMS) to the concrete slab concrete in the domestic field, the purpose of this study is to confirm the practical use of CIMS and to verify the accuracy of estimating the initial strength of concrete. As a result, it shows a high correlation when the compressive strength and CIMS estimated strength of the specimen for structural management are converted and compared with the integrated temperature. However, in order to determine a more accurate experimental constant, it is necessary to consider the results up to 28 days.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.155-156
• /
• 2022

In the process of developing an industrial robot, various simulations should be conducted to evaluate the driving, movement, and performance of the robot. Space and time constraints exist to manufacture existing robots and implement various simulations, and efficiency is reduced due to high costs. To solve this problem, many simulations can be conducted by implementing the same movement and working environment as the real environment in virtual reality using digital twin technology. This study proposes a process for establishing a digital twin model of automated layout robots. Using the digital twin model, it is expected that it will not only evaluate the hardware performance of the robot in the future, but also verify the robot's algorithms such as motion planning and work process, identify and solve potential problems in advance, and prevent problems caused by software.

• 건축역사연구
• /
• 제16권5호
• /
• pp.41-54
• /
• 2007

The Fagus Factory at Alfeld on the Leine in Germany, which was built in 1911 and 1914, is a well-known and very important object in the history of modern architecture. Alan Colquhoun mentioned that it is "prophetic of the 'objective' (sachlich) Modern Movement of the 1920s". Vittrio M. Lampugnani evaluated it as "a Pioneer building of the architectural Realism". Most of historian of architecture explain that these achievements were accomplished mainly by the master architect Walter Gropius and sometimes by his co-worker Adolf Meyer. Through investigating the background in the planning stage and the process of design it is to try to find out what is truly happened during the project time. Furthermore, historical meanings of the building in the modern architecture is reinterpreted in the following aspects; who or which elements have influence on the Fagus Factory? and what kind of problems can be caused by the digested architectural history?

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.87-88
• /
• 2022

The use of converter slag as an aggregate for concrete is limited due to the risk of expansion. This study analyzed the substances causing the expansion of converter slag and evaluated the possibility of its use as an aggregate for concrete through separation and selection. As a result of the experiment, it was confirmed that CaO and MgO were concentrated in the slag particles inducing expansion, and it was confirmed that it was possible to separate them from non-expanded particles through magnetic.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.211-212
• /
• 2023

Building Information Modeling (BIM) design has been mandatory in Korea since 2016, and it has been gradually expanding in the industry, with a slow attempt to apply it in remodeling constructions. This is because Korea is facing a situation where many buildings are over 30 years old and require remodeling or reconstruction. The remodeling industry is also a growing market, as it saves construction time and cost compared to reconstruction. BIM is an ideal technology element for a competitive remodeling construction, as remodeling constructions face a complicated construction process from the start, including demolition, maintenance, and reinforcement to save the change process. However, there are still limitations in applying BIM to remodeling constructions, due to considerations of the existing building and the complicated requests of the inhabitants. BIM still has technical and environmental limitations for general use. In this study, I analyzed BIM application cases from existing studies and suggest what improvement points should be strengthened.

• 한국농촌건축학회논문집
• /
• 제22권4호
• /
• pp.79-86
• /
• 2020

In Korea, the Basic Act is guaranteed through the "Act on the Guarantee of Convenience Promotion for Disabled Persons, the Elderly, Pregnant Women, etc." and various ordinances. In order to improve this situation, it is necessary to introduce Universal Design (UD). By applying this where it is most needed, access to cultural properties is enhanced to promote multiple rights. Currently, the region with the largest population of the elderly in Korea is Gyeonggi-do, but the region with the highest proportion of the elderly is Jeolla-do. However, the Jeolla-do area is lagging behind in the revision of UD regulations or guidelines. Taking this into consideration and introducing it to each facility will also help to achieve balanced national development. In order to establish and apply effective universal design-related policies, it is necessary to diagnose the aspects of social change that affect our lives. In this study, the need for UD should be expanded as a basis for expanding social activities of socially disadvantaged people in Jeollabuk-do. Its goal is to diagnose the current status of UD and to suggest directions for application of improvements.

• 건축사
• /
• 통권614호
• /
• pp.110-112
• /
• 2020

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.139-140
• /
• 2019

In this study, we conducted a comparative analysis of the effects of resuscitation after the re-application of mortar with much FA replacement on the degree of resuscitation. Results When NaOH was applied to the top of the mortar where 90% of FA was replaced, and maintained for 24 hours, the degree of resuscitation at $40^{\circ}C$ was completely improved. However, when medium curing was carried out, it showed a higher degree of compression than water or lapping curing at 10 MPa in 28 days. The degree of resuscitation on the 28th day was revived from around 10% of the normal level to about 20~30%, and it was analyzed that it was difficult to achieve the OPC reduction by any method.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.31-32
• /
• 2019

In this study, oxidized graphene nanoplatelet(GO) was prepared by oxidizing graphene nanoplatelet(GNP) with nitric acid in order to solve the problem of dispersion of GNP, one of nano materials. GNP/Epoxy and GO/Epoxy paint were prepared by mixing GNP, GO with 0.1, 0.3, 0.5 and 1.0 wt.% in epoxy paint and the mechanical properties were evaluated. As a result, GNP/Epoxy and GO/Epoxy paints showed better mechanical properties than Neat Epoxy which did not incorporate GNP, GO. Especially, when 0.3 wt.% of GO was incorporated into epoxy resin, it showed higher tensile strength than Neat Epoxy. It was confirmed that acid treatment of GNP was effective in improving the mechanical properties of epoxy paint. However, graphene material was found that it was not effective in improving the bond performance of the epoxy paint.