• Journal of Biosystems Engineering
• /
• v.39 no.3
• /
• pp.158-165
• /
• 2014

Purpose: The objective of this paper was to compare test standards regarding the performance and safety of agricultural tractors to identify the differences in test conditions, measurement tolerances, and test procedures. Based on the comparison, some recommendations were proposed for possible revisions or improvements to current tractor test standards. Methods: The test standards and codes of major standards development organizations (SDOs), such as the Organization for Economic Cooperation and Development (OECD), the International Organization for Standardization (ISO), the American Society of Agricultural and Biological Engineers (ASABE), EC type approval, and the board of actions of the Nebraska Tractor Test Laboratories (NTTL), were selected and analyzed. Comparison of the test standards: The ISO provides references for fuel and lubricants for tractor tests, and the OECD provides additional measurements for calculating fuel consumption characteristics during the power take-off (PTO) tests. The ISO, EC type approval, and the ASABE provide PTO protective device and the safety requirements. During drawbar power tests, seven transmission ratios are selected for fully automatic transmissions, according to the OECD. In case of hydraulic lift tests, ISO 789-2 and OECD Code 2 advise the use of a static lift force, while SAE J283 advises the use of additional dynamic lift capacity tests for a better representation of in-field operations. The OECD, the ISO, and EC type approval determine the seat index point (SIP), whereas the ASABE determines the seat reference point (SRP) for roll-over protective structure (ROPS) tests. Diversified measurement tolerances were among the braking performance test standards. The European Union (EU) has developed daily limits for vibration exposures with adaptations from ISO 2631-1. Electromagnetic compatibility evaluations are emerging of high-efficiency tractors due to the long-term conformance to electromagnetic emissions and interferences. Comparisons of tractor test standards discussed in this paper are expected to provide useful information for tractor manufacturers and standards development personnel to improve the performance and safety test standards of tractors.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.12
• /
• pp.1199-1205
• /
• 2011

In the present work, a seat suspension system adopting semi-active damper is evaluated for driver's ride quality. A cylindrical type of ER(electrorheological) damper is designed and manufactured for the seat suspension of heavy vehicles. The governing equation is derived under consideration of human vibration. A sliding mode controller is then synthesized and experimentally realized on the manufactured ER seat suspension while a driver is sitting on the controlled seat. Ride quality is evaluated by fatigue decreased proficiency boundary, vibration dose value and crest factor utilizing weighted-acceleration according to ISO2631.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.04a
• /
• pp.25-28
• /
• 1996

This paper addresses the issues and difficulties encountered in developing a 12-axis measurement system for the assessment of whole-body vibration exposed from the body contact area. The contents of related survey work and the ideas from Professor Griffin in ISVR, that have led to its successful development, are introduced here. The developed 12-axis measurement system is shown to satisfy the international standards of ISO 2631 and BS 6841 in EC. This system is expected to play a key role in assessing the ride quality of passenger cars that is rapidly becomes much interest in Korean car-makers and tyre-makers.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1346-1349
• /
• 2007

신축 구조물의 설계 단계에서 동적 강도 기준 및 진동 설계 기준을 설정하고 사람의 거동에 따른 기준층 구조의 동적 사용성 및 건물의 용도별 진동 영향성 평가를 동적 시뮬레이션 기법을 토대로 정량적인 방법을 통하여 수행하고 그 결과를 바탕으로 건물 사용성 및 용도에 따른 구조물의 안정성, 근무 요원들의 근무 환경 및 건물 운용의 관점에서 진동 영향성 평가를 수행함과 동시에 필요한 경우 최적의 동적 대책을 수립한다. 또한 건물 내부의 운용설비가 구조물에 미치는 영향을 평가하여 최적의 방진 대책을 제시하여 건물 완료 후 발생할 수 있는 진동 문제를 최소화 하고자 한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.365-368
• /
• 2005

The dynamic model was developed to analyze vibration acceleration and ride comfort during the operation of rubber-tired light rail vehicles. The ride comfort for standing passengers was analyzed in accordance with ISO 2631-1, UIC 513R, and CEN Draft prENV 12299 using this model. The result was applied to the detail design of Korean-standard, rubber-tired light rail vehicles, and the detail specifications related to ride comfort was determined based on this result. The ride comfort test was performed along the test track by using 2 car-train, and its result was compared with that of the ride comfort analysis, verifying the validity of the developed dynamic model. It was also verified whether or not the developed Korean-standardized, rubber-tired light rail vehicle met specified target specifications on ride comfort.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.352-355
• /
• 2006

본 연구에서는 건축 구조물 용도에 따라 구조물의 직접적인 손상을 방지하기 위하여 규제하는 기준치, 인간의 감각 통하여 느껴지는 진동으로 안락한 주거 환경 또는 작업 환경을 유지하기 위한 규제치, 구조조물에 설치된 장비, 특히 반도체, 통신장비등과 같이 정밀장비의 경우 구조물에서 발생되는 진동으로부터 장비의 성능을 유지시켜주기 위한 기준 등을 확인하여 건물 용도에 최적의 진동 허용 규제치를 제안하며 기준에 따른 초기설계단계에서 최적저감대책을 수립하고자 함이다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.553-558
• /
• 2002

The blast vibration can generate occupants dissatisfy as well as damage of physics nearby building. Then blast vibration estimation issue important problems. But, now blast vibration prediction inside-outside country not established objective method to express magnitude of vibration according to blast number. In this study, Our propose show our country problem of blast vibration about blast vibration measurement and this problems be able to find improve method.

• Journal of Biosystems Engineering
• /
• v.18 no.3
• /
• pp.191-198
• /
• 1993

Vertical and horizontal ride vibrations of the selected agricultural tractors were measured and evaluated with respect to the ISO 2631 'guide for the evaluation of human exposure to whole body vibration'. Evaluation showed that at the normal transportation speeds of 1.4~20km/h on both the concret and ground surfaces tractor drivers were exposed to the vibrations whose magnitudes exceed the 8 hour fatigue decreased proficiency boundary in the frequency ranges of 2~16Hz in vertical and 1~2Hz in horizontal directions. Considering that tractor operation becomes as one of the specialized job for the future farming in Korea, measures must be made to protect the drivers against harmful ride vibrations of agricultural tractors.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.662-667
• /
• 2009

In this study, the serviceability of Waffle shaped(WAS) and Double-Tee(DT) precast concrete slabs was evaluated and compared based on the vertical acceleration magnitude induced by walking and heel drop loads. Tests were conducted for practical building structures (a shopping mall in Hanam) of which floor systems used WAS and DT slabs. Natural frequencies of the slabs were similar to those obtained by using analytical models. The measured acceleration level was evaluated by vertical floor acceleration criteria presented by ISO-2631, AIJ(1991, Japan), and a previous study regarding floor vibration limit. Test results showed that both WAS and DT slabs satisfied all the criteria and the maximum acceleration level of WAS slabs was lower than that of DT slabs.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.125-131
• /
• 2000

This study was performed to evaluate the whole-body vibration and occupational noise for excavator drivers. Measurement, evaluation and assessment were based on the ISO 2631 and OSHA. Average vibration level was 0.65m/$s^2$(z axis) for breaking work and 0.36 m/$s^2$(z axis) for excavating work. Vibration levels during breaking work exceed the health guidance caution zone and this means that the drivers are exposed to potential health risks. Average daily noise exposure level was 86.4 dB(A) for breaking work and 84.6 dB(A) for excavating work.