• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.719-723
• /
• 2010

일반적으로 유량측정방법 중에서 파샬플룸은 유속이 매우 느리거나 토사유입이 많은 지점에서 위어에 비해 상대적으로 유리한 유량 계측기이다. 국제표준화기구(ISO : International Organization for Standardization)에서 파샬플룸의 규모별 규격화된 경험식을 제안하고 있으나 수리모형실험이나 수치모의를 통한 체계적인 연구는 다소 부족한 실정이다. 따라서 본 연구에서는 ISO 규격 파샬플룸에 대하여 경험식과 수치모의를 비교하여 파샬플룸에 대한 수치모의의 적정성을 검토하였고 ISO 규격을 따르지 않는 임의규격의 파샬플룸에 대하여 동일 조건의 수리모형실험 및 수치모의 결과로 비교 검토하였다. 수리모형실험에서는 다양한 유량 유입조건 및 수심조건에 따른 파샬 플룸 내 상 하류 수심을 측정하였으며, 수치모의를 통해 측정된 값과 비교한 결과 오차는 평균 4% 내외로 나타났다. 수치모의결과를 이용하여 유량산정공식을 도출한 후, 실험값과 비교하였다. 그 결과 오차는 최대 2.3%로 나타났으며 이에 따라 파샬플룸의 규모를 결정하기 위한 수치모의는 타당한 것으로 판단된다. 파샬플룸의 규모결정시 실제 지형과 유입부 형상 등을 고려한 수치모의를 수행하고 본 연구에서 배제했던 잠수월류에 대해서도 추후 연구를 수행한다면 1차원적인 경험식이나 측정시 오차가 발생하기 쉽고 수행 과정이 까다로운 수리모형실험을 보완할 수 있을 것으로 판단된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.628-637
• /
• 2017

The automobile industry has developed Advanced Driver Assistance Systems (ADASs) to prevent traffic accidents and reduce the burden for drivers. One example is the Lane Keeping Assistance System (LKAS), which was developed for automotive vehicle systems for safety and better driving. The main system of the LKAS supports the driver while maintaining the vehicle within a lane. LKAS uses a radar sensor and camera sensor to collect information about the vehicle's position in the lane and send commands to the actuator to influence the lateral movement of the vehicle if necessary. Recently, vehicles equipped with LKAS have become commercially available. Test procedures for international LKAS evaluation are being discussed and developed by international committees, such as the International Organization for Standardization and United Nations Economic Commission for Europe. In Korea, an evaluation of LKASs for car safety is being planned by the Korean New Car Assessment Program. Therefore, test procedures should be developed for LKASs that are suitable for the domestic road environment while accommodating international standards. We developed a test scenario for LKASs and propose a formula for obtaining the target relative distance. To validate the methods, a series of experiments were conducted using commercially available vehicles equipped with LKAS.

• Journal of the Korean Society for Library and Information Science
• /
• v.38 no.3
• /
• pp.85-101
• /
• 2004

The revolution of information in information society innovates a lot of business processes. and the renewed processes contribute new paradigms of the 21th century. As one of the revolutions, ISO 9000 becomes a standard for developing efficient quality management systems which provide any-time and any-where environments satisfying customer needs. Thus, it becomes important to research on quality management systems for improving quality in information flowing and service domain. In this paper, we describe the applicable direction and the case study of ISO 9001 : 2000 which establishes quality management systems in the domain and hope to help for the Quality enhancement.

• The Korean Journal of Franchise Management
• /
• v.2 no.2
• /
• pp.134-149
• /
• 2011

For decades, corporate social responsibility (CSR) has been a subject of intense debate among scholars and practitioners. Discussions have generally focused on the role of business in society and the nature of an enterprise's social responsibilities. The International Organization for Standardization (ISO) announced the implication of the ISO 26000 as the new guidance standard for social responsibility, which is built on the intellectual and practical infrastructure of ISO 9000 and ISO 14000. Although the enthusiasm for corporate social responsibility (CSR) has been echoed in the Chinese marketing literature, with the very low rate and level of CSR implementation in China's enterprises based on 2011 report of Chinese Academy of Social Sciences, this paper will give a general statement on the current status and future management mode of CSR in China.

• Journal of Hydrogen and New Energy
• /
• v.33 no.4
• /
• pp.284-292
• /
• 2022

Hydrogen is promising a candidate for energy supporting the carbon neutrality policy for greenhouse gas reduction, which is being promoted in several countries, including Korea. Although challenging efforts-such as lowering the costs of green hydrogen production and fuel cells-remain, hydrogen fuel cell electric vehicles (FCEVs) are expected to play a significant role in the energy transition from fossil fuels to renewable energy. In line with this objective, the hydrogen FCEV working group in the International Organization for Standardization (ISO) compiled and revised international standards related to hydrogen refueling stations as of 2019. A well-established hydrogen quality management system based on the standard documents will increase the reliability of hydrogen charging stations and accelerate the use of FCEVs. In this study, among the published ISO standards and other references, the main requirements for managing charging stations and developing related techniques were summarized and explained. To respond preemptively to the growing FCEV market, a continuous hydrogen quality monitoring method suitable for use at hydrogen charging stations was proposed.

• Journal of Ocean Engineering and Technology
• /
• v.29 no.6
• /
• pp.418-426
• /
• 2015

Recently, shipping operators have been making efforts to reduce the fuel cost in various ways, such as trim optimization and bulb re-design. Furthermore, IMO restricts the hydro-dioxide emissions to the environment based on the EEDI (Energy Efficiency Design Index), EEOI (Energy Efficiency Operational Indicator), and SEEMP (Ship Energy Efficiency Management Plan). In particular, ship speed is one of the most important factors for calculating the EEDI, which is based on methods suggested by ITTC (International Towing Tank Conference) or ISO (International Standardization Organization). Many shipbuilding companies in Korea have carried out speed trials around the Korea Straits. However, the conditions for these speed trials have not been exactly the same as those for model tests. Therefore, a ship’s speed is corrected by measured environmental data such as the seawater temperature, density, wind, waves, swell, drift, and rudder angle to match the conditions of the model tests. In this study, fundamental research was performed to evaluate the ship resistance performance due to changes in the water temperature and salinity, comparing the ISO method and numerical simulation. A numerical simulation of a KCS (KRISO Container ship) with a free-surface was performed using the commercial software Star-CCM+ under three conditions that were assumed based on the water temperature and salinity data in the Korea Straits. In the simulation results, the resistance increased under low water temperature & high salinity conditions, and it decreased under high water temperature & low salinity conditions. In addition, the ISO method showed the same result as the simulation.

• Journal of Hydrogen and New Energy
• /
• v.34 no.6
• /
• pp.623-630
• /
• 2023

Recently, a hydrogen charging station-related memorandum of understanding (MOU) was signed between Korea Transport Institute and United Arab Emirates (UAE) Ministry of Transport in Abu Dhabi, creating a foundation for exporting green hydrogen charging stations and hydrogen powered public transit buses developed with Korean technology to Abu Dhabi. Reliable construction and operation of the charging stations require a thorough review on associated standards and legal requirements. In particular, it is essential to analyze currently effective standards related to hydrogen production, hydrogen vehicle charging, and hydrogen charging stations. This paper specifically focuses on comparative analysis of hydrogen-related standards in the UAE and the Republic of Korea. Similar to UAE, Korean hydrogen charging station-related standards follow International Organization for Standardization (ISO) standards. From real-life experiences in developing and operating charging stations, even more essence of ISO standards have been adopted in Korean standards than UAE. In particular, ISO standards related to fire prevention are additionally included in Korea. This paper also suggests procedural and administrative strategies for enabling application of Korean hydrogen charging station-related standards in UAE.

• Journal of the Society of Naval Architects of Korea
• /
• v.60 no.4
• /
• pp.278-287
• /
• 2023

This study aims to analyze and evaluate the structural strength of a 53ft Liquefied Natural Gas (LNG) tank container according to International Organization for Standardization (ISO) 1496-3, amidst growing global demand for LNG transportation. The research was conducted in two main stages: structural analysis using Finite Element Analysis (FEA) under various load conditions, and structural strength tests following ISO 1496-3 test procedures. The structural analysis was performed considering different loading conditions to assess the structural safety of the tank container. Calculated stresses were compared with allowable stress under specified load conditions. The structural strength tests were conducted at Mokpo National University's Subsea Umbilical cable Riser Flowline R&D Center, which provided a suitable testing environment. The study found that calculated stresses met the allowable stress under specified load conditions, confirming the structural safety of the tank container. Additionally, the maximum deformation and permanent deformation satisfied the design criteria for all test cases, indicating the container's structural strength meets requirements. The research also contributed valuable data for future structural strength tests of similar products and facilitated the development of safe and efficient LNG transportation solutions by developing effective test procedures in accordance with ISO 1496-3 standards.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.06a
• /
• pp.507-509
• /
• 2012

IHO has established S-100 Standard profiled from ISO 19100 GIS standards for standardization and improvement of hydrographic data and are developing S-10X Standards. IMO is implementing the e-Navigation strategy for maritime safety and marine environment protection and has established the CMDS as information standard framework which will be developed from the S-100 standard. The development domain of e-Navigation can be divided into onboard, communication network, onshore and VTS is a core actor in onshore system. In this study, we analyzed the effects of S-100 standard development on VTS through e-Navigation strategy of IMO and suggested the cooperation between hydrographic fields and VTS fields under e-Navigation strategy.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.1
• /
• pp.37-46
• /
• 2016

Quality has been a key issue to manufacturers. Many distinguished scholars have defined quality with profound insight. Korean firms struggle to make better products to fulfil requirements and satisfy customers. Korean industries have implemented quality management from Japan in early 70s. Statistical quality control, QCC (Quality Control Circle), and total quality management have also been introduced in succession. Chief executive officers, managers, and field employees have been aware of the importance of quality since then. This quality movement force workers to improve quality. They have to maintain the quality of products and compete with foreign products. Korean industries were able to compete with foreign industries in price. However, Korean firms now have to compete in quality as well as price. ISO (International Organization for Standardization) was established and industries around world have started to implement standardized systems depending on their need. ISO 9000 has continuously been revised and firms around world started to register a ISO 9000 certificate. Today's quality competitiveness gets more deeply involved. KSA (Korean Standard Association) have launched QCAS (Quality Competitiveness Assessment System) since 1997. Up until now recent status of QCAS have been reported but the characteristics of QCAS results have not been analyzed. In this article we examine the QCAS results of 41 firms in 2014. QCAS consisted of 13 subsections : strategy and management system, organization culture and development of human resource, information management, quality system, customer satisfaction, management achievement, TPM, logistics, product development and technology, PL, QCC, SQC/SPC, and reliability. We performed one way ANOVA to discover the difference among the levels of firm size, business type, and quality hall of fame using the total scores of 13 subsections resulted from QCAS. We also analyzed the scores of 13 individual subsections of QCAS to see if there is any differences based on firm size and business type. We interpret the results and implication of analysis and finally draw a conclusion.