• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.4
• /
• pp.388-395
• /
• 2016

This paper explores the photocatalytic sensitivity of cement mortar incorporated with recycled $TiO_2$ from waste water sludge. Basically, $TiO_2$ cluster sank down slowly to the bottom of cement mortar specimen before setting and hardening process. This leads the mismatch of $TiO_2$ concentration on the top and the bottom faces of a specimen. This poorly dispersed $TiO_2$-cement mortar naturally exhibits poor NOx removal efficiency especially on the top of cementitious structure. In architectural engineering application such as building or housing structures, one can simply filp over from the bottom so that more $TiO_2$ concentrated surface can be placed outward into the air. However, in highway pavement case, this could not be applicable due to in-situ installation of concrete pavement. Hence, the dispersion of $TiO_2$ cluster inside the cementitous material is getting important issue onto road construction application. To elaborate this issue, according to our results, silica fume, high-ranged water reducer, viscosity agent, blast furnace slag were not enhanced much of dispersion characteristics of $TiO_2$ cluster. The combination of foaming agent and accelerator of hardening with viscosity agent and small grain size of fine aggregate may help the dispersion of $TiO_2$ inside cementitious materials. Even though the enhanced dispersion were applied to the specimen, NOx removal efficiency doest not change much for the top surface of the specimen. This concurrently affected by the presence of tiny air voids and the dispersion of $TiO_2$ in that these voids could easily adsorbed NOx gas with the aid of large surface area.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.667-678
• /
• 2002

In this paper, a new radiating structure with a multi-layered two-dimensional metallic disk array was proposed for shaping the flat-topped element pattern. It is an infinite periodic planar array structure with metallic disks finitely stacked above the radiating circular waveguide apertures. The theoretical analysis was in detail performed using rigid full-wave analysis, and was based on modal representations for the fields in the partial regions of the array structure and for the currents on the metallic disks. The final system of linear algebraic equations was derived using the orthogonal property of vector wave functions, mode-matching method, boundary conditions and Galerkin's method, and also their unknown modal coefficients needed for calculation of the array characteristics were determined by Gauss elimination method. The application of the algorithm was demonstrated in an array design for shaping the flat-topped element patterns of $\pm$20$^{\circ}$ beam width in Ka-band. The optimal design parameters normalized by a wavelength for general applications are presented, which are obtained through optimization process on the basis of simulation and design experience. A Ka-band experimental breadboard with symmetric nineteen elements was fabricated to compare simulation results with experimental results. The metallic disks array structure stacked above the radiating circular waveguide apertures was realized using ion-beam deposition method on thin polymer films. It was shown that the calculated and measured element patterns of the breadboard were in very close agreement within the beam scanning range. The result analysis for side lobe and grating lobe was done, and also a blindness phenomenon was discussed, which may cause by multi-layered metallic disk structure at the broadside. Input VSWR of the breadboard was less than 1.14, and its gains measured at 29.0 GHz. 29.5 GHz and 30 GHz were 10.2 dB, 10.0 dB and 10.7 dB, respectively. The experimental and simulation results showed that the proposed multi-layered metallic disk array structure could shape the efficient flat-topped element pattern.

• Journal of The Korean Association For Science Education
• /
• v.36 no.5
• /
• pp.739-756
• /
• 2016

The purpose of the study is to reflect on 'myself' as a teacher educator of college of education in depth and to improve my instruction through self-study with three critical collaborators. 17 pre-service science teachers and I have participated in this study of a teacher educator's course since March 2016 after the preliminary practice in 2015. The video recorded the course for 11 weeks with about 40 hours of lessons. The data source also included teacher educator's reflective journals, lecture evaluations, online boards and so on. Questionnaires were distributed and answered both at the beginning and at the end of the course and pre-service teachers wrote their reflective journals. Four of them were in the focus group interviews. During the course, the weekly group meeting of critical collaborators analyzed the emerging issues based on the lesson clips and teacher educator's reflective journals with discussion for the course innovation. Four phases were revealed in the process and for the purpose of the course such as exploration, conflicts, challenges, and changes. The results showed that first, we identified tensions among the teacher educator's multiple identities as a lecturer, a faculty member, and a researcher. Second, there were differences between goals of teacher educator and pre-service teachers in the course, and this obstructed the success of the course sometimes. Third, these practices led to explore balanced alternative views and interpretations of the problem by critical views and to expand and improve our teaching practice and thinking. In addition, the self-study with critical collaborators helped to bring conflicts and issues below my practice to light for collaborative reflection and it gave a chance to understand ourselves as teacher educators in different ways.

• Sleep Medicine and Psychophysiology
• /
• v.12 no.1
• /
• pp.39-44
• /
• 2005

Objectives: Much attention has been paid to sleep apnea syndrome (SAS) in the elderly because of its high prevalence. It is expected that SAS in the elderly has both similarities and differences compared to SAS in the young or middle-aged populations. The aim of this study was to elucidate the characteristics and consequences of SAS in the elderly. Methods: In this study we included 210 young or middle-aged adults between 23 and 59 years (20 women and 190 men) and 65 older adults between 60 and 83 years of age (16 women and 49 men). Respiratory disturbance indices (RDIs) of the study subjects were more than 5 in an overnight polysomnography. They completed the Epworth Sleepiness Scale (ESS) and Pittsburgh Sleep Quality Index (PSQI). Informations about body mass index (BMI), neck, waist, and hip measurements, and blood pressure were obtained. Results: No difference was observed between older adults with SAS (older SAS) and adults aged under 60 with SAS (SAS aged under 60) in RDI, apnea index, % time of oxygen saturation less than 90%, and PSQI. Obstructive apnea index and oxygen desaturation index (ODI) were lower in older SAS. Compared to SAS aged under 60, lowest oxygen saturation and central apnea index were higher in older SAS, but they were statistically not significant. BMI and neck circumference were significantly lower in older SAS compared to SAS aged under 60. Diastolic blood pressure was lower in older SAS compared to SAS aged under 60 with no difference in systolic blood pressure. Older SAS showed lower scores in ESS than SAS aged under 60. Significant correlation was observed between RDI and BMI in SAS aged under 60, but not in the case of older SAS. The relationships between RDI and neck circumference, systolic and diastolic pressure, and ESS were similar. Conclusions: The elderly with SAS were not over-weight and there was no relationship between body weight and the severity of SAS. Also, the behavioral and cardiovascular effects of SAS were not marked in the elderly, which might be partly explained by decreased ODI and relatively higher lowest oxygen saturation in older SAS. The normal aging process, aside from increased body weight, might contribute to the development of SAS in the elderly with modest complications.

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.6
• /
• pp.1167-1177
• /
• 1998

Background : Pulmonary tuberculosis is one of the diseases characterized granuloma formation which was controlled by cellular immune reactions. In the process of granulomatous changes, activated alveolar macrophages and T lymphocytes secrete many cytokines including interleukin-1 (IL-1), tumor necrosis factor-alpha(TNF-$\alpha$), interferon-gamma(IFN-$\gamma$) which mediate inflammatory reactions. Intercelluar adhesion molecule-1(ICAM-1) also known to major role player in inflammatory processes, and increased cellular expressions when endothelial cell was stimulated by IL-1, TNF and IFN. Method : To evaluate relationships among cellular immune reactions and clinical stages, pulmonary tuberculosis patients were classified into three groups according to their clinical stages including minimal, moderate and far advanced tuberculosis. TNF-$\alpha$ IFN-$\gamma$, sICAM-1 (soluble form of ICAM-1) were measured at the time of diagnosis and after 6-months anti-tuberculosis medications by radioimmuno assay or enzyme linked immunosolvent assay. Result : TNF-$\alpha$, IFN-$\gamma$, sICAM-1 were significantly increased in moderate and far advanced pulmonary tuberculosis patients but no meaningful changes in minimal staged patients. 6-months anti-tuberculosis medications reduced serum sICAM-1 levels significantly, related to clinical improvement but no significant changes were found in the serum levels of TNF-$\alpha$ and IFN-$\gamma$. In the point of correlations. positive ones revealed between TNF-$\alpha$ and sICAM-1, also between IFN-$\gamma$ and sICAM-1 but no correlation between TNF-$\alpha$ and IFN-$\gamma$. Conclusion : Measurement of serum sICAM-1 could be useful parameter to evaluate the severity of pulmonary tuberculosis and to monitor disease activities during anti-tuberculosis medications.

• Tuberculosis and Respiratory Diseases
• /
• v.43 no.6
• /
• pp.936-944
• /
• 1996

Background: Neutrophils or monocytes separated in vitro by the adherence to plastic surface are known to be activated by surface adherence itself and subsequent experimental data might be altered by surface adherence. Adhesion molecules and gene transcription of the inflammatory mediators are known to be associated in this process. To evaluate whether adhesion molecule and transcriptional activation of the inflammatory substances are also involved in the activation of human alveolar macrophage by the adherence procedure, we designed this experiment. Method : Bronchoalveolar lavage was performed in the person whose lung of either side was confirmed to be nonnal by chest cr and alveolar macrophage was harvested. To measure the expression of Interleukin-8(IL-8) mRNA, manganese superoxide dismutase(SOD) mRNA and CD11/CD18 mRNA in human alveolar macrophage of both adherence state and suspension state, Northern blot analysis was done at 0, 2, 4, 8 and 24hrs after the adherence to plastic surface and during suspension state. Then, phorbol myristate acetate(pMA) and N-formyl-methionyl-leucyl-phenylalanine(fMLP) were added respectively in the same experimental condition. Result : 1) Human alveolar macrophages in the adherent state induced IL-8 mRNA and SOD mRNA expression which was maximal at 8 hours after the adherence to plastic surface. But we could not observe the upregulation of CD18 mRNA by surface adherence. 2) PMA induced these mRNA expression both in the adherent cell and the nonadherem cells, but the induction of mRNA expression by fMLP occurred only in the adherent cells. Conclusion: These results suggest that adherence of huamn alveolar macropahge is an important cell-activating event that may play a critical role in the modulation of lung inflammatory respones.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.2
• /
• pp.43-71
• /
• 1999

This research is an experimental work of developing a construction material using municipal wastewater sludge as liner and cover materials for waste disposal landfill. Weathered granite soil and flyash, produced as a by-product in the power plant, were used as the primary additives to improve geotechnical engineering properties of sludge. For secondary additives, bentonite and cement were mixed with sludge to decrease the permeability and to increase the shear strength, respectively. Various laboratory test required to evaluate the design criteria for liner and cover materials, were carried out by changing the mixing ratio of sludge with the additives. Basic soil properties such as specific gravity, grain size distribution, liquid and plastic limits were measured to analyze their effects on permeability, compaction, compressibility and shear strength properties of mixtures. Laboratory compaction tests were conducted to find the maximum dry densities and the optimum moisture contents of mixtures, and their effectiveness of compaction in field was consequently evaluated. Permeability tests of variable heads with compacted samples, and the stress-controlled consolidation tests with measuring permeabilities of samples during consolidation process were performed to obtain permeability, and to find the compressibility as well as consolidational coefficients of mixtures, respectively. To evaluate the long term stability of sludges, creep tests were also conducted in parallel with permeability tests of variable heads. On the other hand, for the compacted sludge decomposed for a month, permeability tests were carried out to investigate the effect of decomposition of organic matters in sludges on its permeability. Direct shear tests were performed to evaluate the shear strength parameters of mixed sludge with weathered granite, flyash and bentonite. For the mixture of sludge with cement, unconfined compression tests were carried out to find their strength with varying mixing ratio and curing time. On the other hand, CBR tests for compacted specimen were also conducted to evaluate the trafficability of mixtures. Various test results with mixtures were assessed to evaluate whether their properties meet the requirements as liner and cover materials in waste disposal landfill.

• Journal of Korean Home Economics Education Association
• /
• v.19 no.4
• /
• pp.75-89
• /
• 2007

This study has its aim at suggesting new direction of our education to search different ways in housing contents by comparing the necessity perception and demands between teachers and students for housing contents in Technology Home Economics curriculum of middle school. To achieve this aim, I chose middle school teachers in charge of Technology Home Economics and male and female students who are in the first grade in high school in Ulsan. I sent e-mail, mail, and visited researcher to gather the data. I used SPSS +12 statistical package for frequency, percentage, mean, standard deviation, and t-test to analyze the data. Here is the result. First, In the part of application of living place, teachers had necessity perception in use and placement of furniture, and arrangement of objects. Students had necessity perception in the use and placement of furniture, the kind and choice of furniture. Also in the indoor environment and equipment part, both teachers and students had necessity perception in controlling of ventilation, temperature, and humidity. In the part of maintenance repair of housing, teachers had necessity perception in the need for maintenance management but students had necessity perception in house equipments and repair had high necessity perception Second, In housing-related general part, teachers demanded housing for elderly, disabled people, information about future housing and students demanded environmentally friendly living environment, housing for elderly, disabled people. In interior design part, teachers demanded in the expression of interior places through computer, the kind and characteristic of housing material and students demanded the way to reuse old furniture, kind and characteristic of housing material. In the part of housing preparation and occupation, teachers demanded the kind of housing-related occupation and students demanded the housing tax and the process of house purchase or concerned matter. Third, there were some difference of necessity perception and degree of demand between teachers and students. Teachers had higher necessity perception and demand in all part except in demand for housing equipment, maintenance, and environmentally friendly living environment.

• Journal of Korean Home Economics Education Association
• /
• v.31 no.4
• /
• pp.1-18
• /
• 2019

The purpose of this study was to analyze the research trend in home economics education using network text analysis method. The 586 research articles published in the Journal of Home Economics Education Association between July, 2003 and December 2018 were examined using Neckinger 4, a social network analysis software. The frequency and centrality measures(degree centrality, closeness centrality, and betweenness centrality) were calculated for the words appeared throughout the whole period, and the centrality analysis and LAD(Latent Dirichlet Allocation) were conducted for the four sub-periods. The results are as follows: first, the most frequently appeared words are parents, culture, unit, health, career, consumption, practicality, etc. The words such as parents and management scored high in degree centrality; parents and male students in closeness centrality; and male students and units in betweenness centrality. Second, when divided into four periods, the words such as education, family, purpose, class, middle school, and school appeared most frequently across the periods; but some words such as 'purpose' (in period 3 and 4), or 'process' (in period 4) were salient only in certain periods. Third, the words with high centrality were consistent regardless of the types of centrality within each period. Fourth, the topic analysis using LAD showed that curriculum, textbook, family healthiness, teaching-learning, evaluation, dietary life, appearance management, and consumption were the topics consistently appeared across all periods. The topics have become diversified and deepened. New topics such as teacher training and safety appeared in later periods, possibly due to the curriculum and national policy changes, and housing as a less represented topic is suggested as an area that needs further research attention. This study has implication in that it allows researchers to identify the major research interests and the trends in research by researchers in home economic education.

• Resources Recycling
• /
• v.2 no.2
• /
• pp.27-38
• /
• 1993

In this study, we investigated the grinding and sedimentation(elutriation) process of the dusts for the effective separation of high purity iron and iron oxides. For characterization of the dust, particle size distribution and chemical composition, were examined. The results obtained in this study may be summarized as follows : 1. The converter CF(clarifier) dust of the Pohang 1st, 2nd steel making factory and EC(Evaporation Cooler), EP(Eltrostatic precititator) dust of the Kwangyang 2nd steel making factory are composed $\alpha$-Fe(21~50%), FeO(wustite)$Fe_3$$O_4$(magnetite), $Fe_2$$O_3$, CaO, $Al_2$$O_3$, $SiO_2$, and etc. 2. Pure iron has ductile characteristic in nature, particle size of the pure iron increase by increasing the grinding time. On the other hand, it is conformed that bo고 particles of hematite and magnetite become less than 325 mesh after 10 minutes grinding. 3. By applying the elutriation technique for the EC dust of the Kwangyang 2nd steel making factory, the iron powder of high content more than 99.17% of pure Fe was recovered with 37.8% yield at grinding time for 40 minutes. 4. By applying the elutriation technique for the CF dust of the Pohang 2nd steel making factory, the iron powder of high content more than 98.38% of pure Fe was recovered with 44.42% yield at grinding time for 40 minutes. 5. When magnetic separation was performed using plastic bonding magnet of 70 gauss, more than 98% Fe grade of iron powder was recovered in the size range +65 -200 mesh but the recovery of it was low.