• 한국산학기술학회논문지
• /
• 제22권6호
• /
• pp.291-298
• /
• 2021

본 연구에서는 지뢰 무기체계를 중심으로 대기동 능력의 발전 배경과 현황을 분석하고 미래 발전 방안을 제시하였다. 2차 대전 후 민간인 피해를 야기한 재래식 지뢰는 CCW 및 오타와 협약 등 국제사회의 규제 대상이 되었다. 기존 지뢰의 비인도성을 감안하여 배치된 살포식지뢰는 자폭 기능이 내장되어 있다. 초기형 지능화 대전차 탄약인 호넷의 도태 원인은 복합 센서로 인한 제작비용 상승 대비 저조한 효과로 분석된다. 2016년 모든 대인지뢰를 금지하는 오바마 정부의 정책이 발표되면서 대기동전력의 계획 지뢰지대 및 종심지역 설치 능력에 공백이 생기게 된다. 이를 대비하여 단기적으로는 기존의 살포식지뢰를 활용할 수 있는 SAVO 전력이 개발되고 관련 수명연장계획(SLEP) 사업이 추진되었다. 장기적으로는 미래 정규전을 위한 다영역작전의 핵심전력으로 지뢰를 선정하고 지형조성장애물(TSO)을 개발하고 있다. TSO 전력은 강화된 센서 및 살상능력을 보유하며, 위성통신 네트워크를 구성함으로 지휘소에서 모든 영역의 지뢰를 개별적으로 제어할 수 있다. TSO 개발에 성공한다면 미군은 2050년까지 전 영역에서 온전하며 강화된 대기동 능력을 발휘할 것으로 분석된다. 우리나라는 특수한 휴전 상황으로 인해 관련 정책의 엄격한 적용은 유예되고 있으나, 단독적인 종심지역 지뢰 살포 능력을 서둘러 갖추어야 하며, 오타와 협약에 적합한 지뢰를 개발할 수 있도록 관련 기술의 선제적인 확보가 필요하다.

• 품질경영학회지
• /
• 제13권2호
• /
• pp.37-47
• /
• 1985

There are several productive maintenance problems that are closely concerned with product quality. In these problems, we have process capability, out-worn equipment problems, plant layout planning, maintenance cost, investment decisions and so on. These problems are analyzed, and some conceptial and applicable systems are developed in this paper. The purpose of this paper is to define that in productive maintenance problems awaiting solution is a necessary condition for improvement on product quality, quality assurance and product liability prevention at this time, and to find an applicable total system.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제10권1호
• /
• pp.73-91
• /
• 2010

All activities relate to railway traffic involve risk and that these arise from a combination of the nature of operating activities. Proper management system is required to provide the organizational capability to reveal, analyse and address these weaknesses over time and in reasonably practicable ways, which will determine the rate at which risks can be further reduced. This paper presents a systematic risk analysis approach to safety planning and decision making, informed by a range of risk assessment techniques. An railway organization's safety management system is also presented that shows the approaches taken to minimize the external risks, and identify the shared risks and explain how they will be controlled through collaboration with others.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2002년도 학술발표회 논문집(I)
• /
• pp.59-64
• /
• 2002

An expert system, to assist dam managers for five dams along the Saikawa River, has been developed with a primary objective of achieving swift and accurate reservoir operation decision-makings during floods. The expert system is capable of supporting on decision-makings upon establishment of flood management procedure and release/storage planning. Furthermore, an attempt was made to improve reservoir inflow prediction models for better supporting capability. As a result, accuracy on prediction of inflow up to 7 hours ahead was improved, which is important for flood management of the five dams, using neural network. The neural network inflow prediction models were developed for each types of floods caused by frontal rainfalls, snowmelt and typhoons, after extracting relevant meteorological factors for each.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.618-622
• /
• 2005

Railway safety case is an important measure for demonstrates operating company's capability, commitment and competence in accordance with Railway Regulation 2000 in UK. Safety case describes the scope of operation, definition and boundary of activity, risk analysis, system safety activity, annul safety plan. Relationships between' these components and company's policy, organization, human resource, control measure, investment plan are also included. A case study for Network Rail (infrastructure manager)'s safety case is described in this paper for the construction of safety rule and safety planning.

• Journal of Dairy Science and Biotechnology
• /
• 제38권4호
• /
• pp.237-239
• /
• 2020

Processes that products we consume that contain dairy foods comprise planning → design → production → quality/suitability assessment → safety verification → launch → distribution → consumption. Analysis of nutrients and potential toxins at each stage in the production process is essential to verify food quality, suitability, and safety. Products display ingredient lists and nutrient content to help consumers choose healthy foods. These products should also be fully assessed for microbes and toxins before reaching consumers. Products require verification through test inspections. However, this step has reduced value from a food manufacturer's viewpoint, because it does not visibly impact real economic trends. The most important first step in determining the quality and suitability of products is the inspection capability of food companies.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.166-168
• /
• 2015

Line of Balance (LOB) method is suitable to schedule construction projects composed of repetitive activities. Since existing LOB based repetitive project scheduling methods are deterministic, they do not lend themselves to handle uncertainties involved in repetitive construction process. Indeed, existing LOB scheduling dose not handle variability of project performance indicators. In order to bridge the gap between reality and estimation, this study provides a stochastic LOB based scheduling method that allows schedulers for effectively dealing with the uncertainties of a construction project performance. The proposed method retrieves an appropriate probability distribution function (PDF) concerning project completion times, and determines favorable start times of activities. A case study is demonstrated to verify and validate the capability of the proposed method in a repetitive construction project planning.

• 산업경영시스템학회지
• /
• 제43권4호
• /
• pp.48-58
• /
• 2020

Naval weapons systems of the Republic of Korea are acquired through the Defense Planning Management System. Recently, acquisition of some naval ships have been delayed, and the causes of the delays have been recognized as inappropriate project management at the Execution Phase. However, we argue that the delay problem in naval ships acquisition should be approached, with due regard for the entire Defense Planning Management System. That is, We should try to investigate from Planning Phase to those of Programming, Budgeting and Execution Phases. Therefore, in this study, we investigated the actual cases of the delay in naval acquisition at all phases of the Defense Planning Management System. Based on the investigation, we tried to identify the naval ship Acquisition Delay Factors and find out the Weights of those factors. As the next step, we calculated the Influence Measures on the naval missions, including the Cost of Naval Capability Gap derived from the delays in acquisition of naval ships. As a final step, we calculated the Acquisition Delay Measures based on the interrelationship between the Acquisition Delay Factors and the Influence Measures. Then we evaluated and analyzed what the results stand for. Finally, we made suggestions for future improvement. The improvement suggestions we made for preventing delay in acquisition of naval ships in this study are as follows. First, we need a shift in perception. It is necessary to measure the Acquisition Delay Factors in acquiring naval ships and manage them from the Planning Phase. Second, resolution must be concerted efforts. All relevant agencies, not just a few, should work together to resolve the problems of acquisition delay. Third, analysis must be based on the accumulation of data. This allows the elaborating of naval ship Acquisition Delay Factors and Delay Measures. If this research method is applied to other military weapons systems in the future, we may be able to not just identify the Acquisition Delay Factors in acquisition of other military weapons systems, but also pursue improvement in those cases.

• 산업경영시스템학회지
• /
• 제39권4호
• /
• pp.137-146
• /
• 2016

In recent years, business environment is faced with multi uncertainty that have not been suffered in the past. As supply chain is getting expanded and longer, the flow of information, material and production is also being complicated. It is well known that development service industry using application software has various uncertainty in random events such as supply and demand fluctuation of developer's capcity, project effective date after winning a contract, manpower cost (or revenue), subcontract cost (or purchase), and overrun due to developer's skill-level. This study intends to social contribution through attempts to optimize enterprise's goal by supply chain management platform to balance demand and supply and stochastic programming which is basically applied in order to solve uncertainty considering economical and operational risk at solution supplier. In Particular, this study emphasizes to determine allocation of internal and external manpower of developers using S&OP (Sales & Operations Planning) as monthly resource input has constraint on resource's capability that shared in industry or task. This study is to verify how Stochastic Programming such as Markowitz's MV (Mean Variance) model or 2-Stage Recourse Model is flexible and efficient than Deterministic Programming in software enterprise field by experiment with process and data from service industry which is manufacturing software and performing projects. In addition, this study is also to analysis how profit and labor input plan according to scope of uncertainty is changed based on Pareto Optimal, then lastly it is to enumerate limitation of the study extracted drawback which can be happened in real business environment and to contribute direction in future research considering another applicable methodology.

• 한국지능시스템학회논문지
• /
• 제26권3호
• /
• pp.169-175
• /
• 2016

최근 다양한 환경에서 지능형 로봇의 안정된 이동과 작업계획에 대한 연구가 이루어지고 있다. 본 논문에서는 상하 결합가능한 구조의 4족 로봇의 설계 및 작업 계획방법을 제안한다. 제안하는 4족 로봇은 리니어 모터를 이용하여 다리 길이를 조절하고, 팔각뿔 형태의 도킹모듈을 이용하여 상하 결합과 분리가 가능하도록 설계하였다. 또한 로봇이 다양한 환경에서 안정된 이동과 정보 수집을 위하여 지자기 센서, PSD 센서, LRF 센서와 카메라를 사용하였다. 리니어 모터를 이용한 장애물 회피 동작방법과 상하 결합 동작방법을 제안하고 구현하였다. 로봇은 다리 길이를 조절하여 장애물을 극복하고, 두 대의 로봇이 상하 결합을 통하여 협력 작업방법을 제안하였다. 두 대의 4족 로봇이 상하 결합을 통하여 4족과 6족 보행을 하고, 상부 결합 로봇의 4개의 다리를 4개의 팔 또는 2개의 팔로 사용할 수 있으며, 결합된 로봇을 이용하여 물건 옮기기 작업을 구현하고, 각 동작들을 실제 실험으로 기능을 검증하였다.