• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.2
• /
• pp.54-61
• /
• 1999

This paper describes the design of a 4-Mbps wireless infrared data transceiver chip. The receiver consits of the analog front-end, clock recovery and frame generator, and demodulator. The transmitter consists of the demodulator and LED driver. The versatile analog front- end consisting of multiple amplifiers makes it possible for the chip to be applied to various infrared environments by compensating DC and offset signal components. A 4PPM (pulse position modulation) scheme is used for data transfer in order to meet the IrDA standards. The chip was fabricated in a $0.8-{\mu}m$ 2-poly, 2-metal CMOS technology and dissipates 122mW for ${\pm}2.5V$ supply.

• Journal of the Korean Ceramic Society
• /
• v.36 no.2
• /
• pp.159-166
• /
• 1999

The physical properties and microstructural changes with heat-treatment of opacified silica aerogels doped by TiO2 were investigated. Monolithic SiO2-TiO2 aerogels were prepared by supercritical drying (25$0^{\circ}C$, 1250 psig) of wet gel obtained by adding titanium isopropoxide to prehydrolyzed TEOS-isopropanol solutions. The density and the porosity of SiO2-10 mol% TiO2 aerogels were 0.23 g/㎤ and 90%, respectively. During supercritical drying, the linear shrinkage of aerogels increased with increase in the titanium content an TiO2 was transformed to the anatase phase as well as particls agglomerates led to TiO2 clusters of 100~800 nm dispersed homogeneoulsy in the silica matrix. The IR transmittance of opacified silica aerogels was very low in the region of wavelengths below 8 ${\mu}{\textrm}{m}$ compared with pure silica aerogels and SiO2-TiO2 aerogels showed the high thermal stability of microstructures up to $600^{\circ}C$.

• Journal of the Korean Ceramic Society
• /
• v.36 no.2
• /
• pp.172-177
• /
• 1999

Graphite and carbonaceous materials showed an excellent capability as a negative electrode in Li-ion batteries because Li-ion can be intercalated and de-intercalated reversibly within most carbonaceous materials of layered structure. Also, the electrochemical potential of Li-intercalated carbon anode is almost identical with that of Li metal. In the present study, mesocarbon microbeads(MCMB) were used as anode electrode and its properties of charge/discharge and interfacial reaction with electrolyte were studied by Potentiostat/Galvanostat test, FT-IR analysis, XRD and SEM. The passivation film of solid-state was formed as the interface between electrode and electrolyte as the cell reaction began and, once formed, became thicker with repeated charge/discharge process. Also, the relationship between the passivation film formed at the electrode interface and storage capacity was discussed.

• Composites Research
• /
• v.24 no.1
• /
• pp.31-36
• /
• 2011

Adhesive shear strengths of the established adhesives and the alternative adhesives were evaluated and their chemical structures were analyzed in order to investigate the possibility of replacing the established adhesives with the alternative adhesives applicable to the seeker for the guided missiles. Two types of the adhesives such as the structural adhesives and the sealant adhesives were considered. Those adhesives were exposed to the combined environmental factors consisting of temperature, moisture and ultraviolet over 1000 hours. Adhesive shear test was conducted to evaluate adhesive shear strengths and ATR FT-IR was utilized to investigate chemical structures. According to the results, the adhesive shear strengths of the alternative adhesives revealed higher than those of the established adhesives. Also the alternative adhesives were more stable to the combined environmental condition than the established adhesives. Therefore, it is found that the established adhesives were able to be replaced by the alternative adhesives.

• Membrane Journal
• /
• v.19 no.2
• /
• pp.150-156
• /
• 2009

To improve the permselective efficiency of polysulfone membranes, the bromination was performed and then the resulting membranes were investigated in terms of membrane structures and gas transport characteristics. The brominated Polysulfone membranes were characterized by FT-IR, 1H-NMR, TGA, contact angle measurements, and gas permeation measurements were accomplished with He, $N_2,\;CO_2\;and\;O_2$. In general, the permeation rates were reduced while the selectivities increased as the bromination progressed.

• Journal of the Mineralogical Society of Korea
• /
• v.2 no.1
• /
• pp.26-36
• /
• 1989

Clinopyroxene in the Geodo mine belongs to diopside-hedenbergite series. It is widely distributed throughout the mine area together with garnet and is also closely related with Fe-mineralization. Clinopyroxenes in the Geodo mine including two samples from the sangdong and Ulchin Mines are studied using polarized microscope, EPMA, XRD, and IR spectroscopy for occurrence, chemistry, structure, and crystal chemistry. Especially, variations in unit-cell parameters are examined in relation with the substitution scheme between Fe and Mg cations. Clinopyroxenes in the Geodo mine occur in both endoskarn and exoskarn zone. It is mostly anhedral to subhedral with fine- to medium-grained in texture, but some have bigger crystals of short prismatic or columnar habits. Clinopyroxene occurs as monomineralic or is associated with mostly garnet and sometimes with actinolite, magnetite, epidote, and chlorite. Chemical analysis reveals that the Geodo clinopyroxene is diopsidic in composition (Di: 65-96%). This fact is in good contrast with garnet chemistry showing mostly andraditic (An: 41-82%). Especially, clinopyroxene coexisting with magnetite belongs to nearly end member diopside (Di: 97-99%). Thus, diopside-andradite pair indicates that Geodo skarns were formed under the reduced environment. X-ray diffraction analysis shows unit-cell parameters vary with increase of Fe contents: a = 9.765-9.838$\AA$, b = 8.943-9.020$\AA$, c= 5.240-5.253$\AA$.$\beta$ = 105.70-104.83$^{\circ}$, and V =440.64-448.19$\AA$3. It is noted from the least square regression that a, b and V increase linearly with increase of Fe content, while $\beta$ slightly decreases and c remains nearly unchanged as change in Fe content. These trends are to difference between synthetic and natural clinopyroxenes. This fact is also recognized in IR spectra which show a slight shift of several absorption bands toward lower wavenumber region with increasing Fe content.

• Journal of Pharmacopuncture
• /
• v.20 no.1
• /
• pp.36-44
• /
• 2017

Objectives: The goal of this study was to characterize Suvarna Bhasma Parada Marit by using the Ayurvedic test parameters, physico-chemical tests, and various instrumentation techniques. Methods: Suvarna Bhasma, an Ayurvedic formulation manufactured as per Bharat Bhaishajya Ratnakar 5/8357 (BBR), has been studied using various instrumentation techniques: X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDAX), laser particle size distribution (PSD) analysis, fourier transform infrared spectroscopy (FT-IR), and atomic absorption spectroscopy (AAS), and physico-chemical parameters, such as the loss on drying (LOD), loss on ignition (LOI), and acid insoluble Ash (AIA) were determined. In addition, Ayurvedic tests, such as Rekhapurnatva (enterable in the furrows of the fingers), Varitaratwa (floatable over water), Nirdhoomta (smokeless), Dantagre Kach-Kach (gritty particle feeling between the teeth), were performed. Results: The XRD study showed Suvarna Bhasma to be crystalline in nature and to contain more than 98% gold. The mean size of the gold crystallites was less than 10 microns, and the morphology was globular and irregular. Suvarna Bhasma contains gold as its single and major element, with EDAX and FT-IR spectra showing that it is more than 98% pure gold. The moisture content (LOD) is less than 0.5%, the LOI is less than 2%, and the AIA is not less than 95%. The Ayurvedic tests, as specified above, helped to confirm the quality of Suvarna bhasma prepared as per the text reference (BBR). Conclusion: This chemical characterization of Suvarna Bhasma performed in this study by using modern instrumentation techniques will be helpful in understanding its pharmacological actions and will help in establishing quality protocols and specifications to substantiate the safety, efficacy & quality of Suvarna Bhasma.

• Journal of the Korean institute of surface engineering
• /
• v.36 no.5
• /
• pp.406-412
• /
• 2003

FT-IR and thermography were used to investigate the infrared radiation characteristic of SiO$_2$ film and SiO$_2$/Fe$_2$O$_3$film coated on aluminum. Through FT-TR spectrum, SiO$_2$film showed high infrared absorption in accordance with the stretching vibration of Si-O-Si, and as$ Fe_2$$O_3$was mixed additional absorption band appeared resulting from the stretching vibration of Fe-O at $590cm^{-1}$ and the bond of Si-O-Fe at $900 cm^{-1}$ The two kinds of film measured by the integration method and the reflective method coincided with each other in the wavelength area of infrared absorption and radiation, and corresponded well with Kirchhoff's law as the infrared emissivity is high in wavelength where infrared absorption rate is high. The emissivity of $SiO_2$ film was 0.65 and that of $SiO_2$/Fe$_2$$O_3$film was 0.77, so the addition of$ Fe_2$$O_3$ raised the infrared emissivity by approximately 13%.$ SiO_2$$Fe_2$$O_3$ film is efficient as an infrared radiator at below $100^{\circ}C$. The temperature of heat radiation after 7 minutes was 117$^{\circ}C$ in aluminum plate and $155^{\circ}C$ in $SiO_2$$Fe_2$$O_3$ film, $38^{\circ}C$ higher than the former.

• Polymer(Korea)
• /
• v.26 no.1
• /
• pp.28-36
• /
• 2002

In this study, we synthesized novel thiophene derivatives by the protection of the carboxyl group of 3-thiophene acetic acid with differently substituted benzyl groups. While 3-thiophene acetic acid is not electro-polymerizable, the modified monomers can be easily electro-oxidized to form stable electroactive polymers. The protecting groups can be easily removed in the solid state and the desired reactive carboxyl group can be introduced on the polymer surface. SEM observations show that obtained polymer films show a very good film surface and homogeneous morphology on the Pt electrode. After introduction of macromonomer, FT-IR spectrum shows new absorption bands at 1650 and $1550 cm^{-1}$, which is consistent with the formation of an amide bond. Electroactivity measurements were examined by cyclic voltammogram(CV). These polymers showed the characteristic electrochemical behavior of poly(3-alkylthiophene)s with reversible redox transition in the range of 0.7-0.9 V.

• Journal of the Korean Chemical Society
• /
• v.36 no.2
• /
• pp.212-217
• /
• 1992

The thermodynamic parameters for the formation of gadolinium benzoate have been determined in the ionic medium of 0.1 M $NaClO_4$ at $25^{\circ}C$ in aqueous solution. The thermodynamic results indicate that the complex is stabilized by the excess entropy effect caused by the dehydration of reacting ions. The especially high stability of Gd(III)-benzoate compared to the monodentate ligand complexes might be ascribed to the conjugation effect of the benzene ring in the benzoate ligand. IR spectra show that benzoate anion acts as a bidentate ligand toward $Gd^{3+}$ to form a chelate ring in solid state. Magnetic susceptibility data of the compound were also obtained and well described by Curie-Weiss law in the temperature range 80${\sim}$300K.