DOI QR코드

DOI QR Code

Effect of Combined Environmental Factors on Adhesive Shear Strengths and Chemical Structures of Adhesives

복합적 환경인자의 영향에 의한 접착제의 접착전단강도 및 화학구조 변화

  • 황영은 (금오공과대학교 기계공학과) ;
  • 윤성호 (금오공과대학교 기계공학과)
  • Published : 2011.02.28

Abstract

Adhesive shear strengths of the established adhesives and the alternative adhesives were evaluated and their chemical structures were analyzed in order to investigate the possibility of replacing the established adhesives with the alternative adhesives applicable to the seeker for the guided missiles. Two types of the adhesives such as the structural adhesives and the sealant adhesives were considered. Those adhesives were exposed to the combined environmental factors consisting of temperature, moisture and ultraviolet over 1000 hours. Adhesive shear test was conducted to evaluate adhesive shear strengths and ATR FT-IR was utilized to investigate chemical structures. According to the results, the adhesive shear strengths of the alternative adhesives revealed higher than those of the established adhesives. Also the alternative adhesives were more stable to the combined environmental condition than the established adhesives. Therefore, it is found that the established adhesives were able to be replaced by the alternative adhesives.

본 연구에서는 유도무기의 탐색기에 적용되는 지존 접착제의 대체 가능성을 조사하기 위해 환경인자의 노출시간에 따른 기존 접착제와 대제 접착제의 접착전단장도들을 평가하고 이들의 화학구조 변화를 조사하였다. 이때 접착제는 기존 접착제와 대체 접착제에 대해 각각 구조용 접착제와 실링용 접착제의 두 종류를 고려하였다. 이들 접착제는 온도, 수분, 자외선 등의 복합적인 환경인자에 최대 1000시간 동안 노출시켰다. 환경인자의 노출시간에 따른 접착제의 접착전단강도를 평가하기 위해 접착전단시험을 수행하고 화학구조 변화를 조사하기 위해 ATR 적외선 분광분석을 수행하였다. 연구결과에 따르면 대체 접착제의 접착전단강도는 기존 접착제의 경우에 비해 높으며 환경인자의 노출에도 매우 안정적으로 나타나 대체 접착제는 기존 접착제의 대체용으로 적용이 가능함을 알 수 있었다.

Keywords

References

  1. Adams, R. D., Comyn, J., and Wake, W. C., Structural Adhesive Joints in Engineering, 2nd ed., Chapman and Hall, New York, 1997, pp. 1-11.
  2. Petrie, E. M., Handbook of Adhesives and Sealants, 2nd ed., McGraw-Hill Professional, New York, 2006, pp. 17-26.
  3. Cowling, M. J., and Knox, E. M., "A Rapid Durability Test Method for Adhesives," International Journal of Adhesion & Adhesives, Vol. 20, 2000, pp. 201-208. https://doi.org/10.1016/S0143-7496(99)00045-7
  4. Aiello, M. A., Frigione, M., and Acierno, D., "Effects of Environmental Conditions on Performance of Polymeric Adhesive for Restoration of Concrete Structures," Journal of Materials in Civil Engineering, Vol. 14, No. 2, April 1, 2002, pp. 185-189. https://doi.org/10.1061/(ASCE)0899-1561(2002)14:2(185)
  5. Frigione, M., Aiello, M. A., and Naddeo, C., "Water Effects on the Bond Strength of Concrete/Concrete Adhesive Joints," Construction and Building MATERIALS, Vol. 20, 2006, pp, 957-970. https://doi.org/10.1016/j.conbuildmat.2005.06.015
  6. Ramani, K., Xu, C., and Kumar, G., "Thermoplastic Adhesive Bonding of Galvanized Steel to Polypropylene Composite and Its Durability," International Journal of Adhesion & Adhesives, Vol. 22, 2002, pp. 187-195. https://doi.org/10.1016/S0143-7496(01)00054-9
  7. ASTM D1002-05, "Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)," Annual Book of ASTM Standards, 14.06, 2005.
  8. ASTM D2651, "Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding," Annual Book of ASTM Standards, 14.80, 1997.
  9. Yoon, S. H., Lee, S. J., and Lee, J. K., "Effects of Combined Environmental Factors on Mechanical and Thermal Analysis Properties of Graphite/Epoxy Composites," Transactions of The Korean Society of Mechanical Engineers. Vol. 13, No. 5, 2002, pp. 1416-1425.
  10. Meyer, F., Sanz, G., Eceiza, A., and Mondragon, I., "The Effect of Stoichiometry and Thermal History During Cure on Structure and Properties of Epoxy Networks," Polymer, Vol. 36, No. 7, 1995, pp. 1407-1414. https://doi.org/10.1016/0032-3861(95)95918-Q
  11. Frigione, M., Lettieri, M., and Mecchi, A. M., "Environmental Effects on Epoxy Adhesives Employed for Restoration of Historical Buildings", Journal of Materials in Civil Engineering, Vol. 18, No. 5, October 1, 2006, pp. 715-722. https://doi.org/10.1061/(ASCE)0899-1561(2006)18:5(715)
  12. Kim, J. H., Choi, K. Y., Joo, H. J., Jin, F. L., and Park, S. J., "A Study on the Water Resistance and Thermo-Mechanical Behaviors of Epoxy Adhesives," Elastomer, Vol. 40, No. 3, 2005, pp. 166-173.

Cited by

  1. Effect of various hygrothermal environments on the failure of adhesively bonded composite single-lap joints vol.47, pp.17, 2013, https://doi.org/10.1177/0021998312453357
  2. Accelerated Degradation Test and Failure Analysis of Rapid Curing Epoxy Resin for Restoration of Cultural Heritage vol.33, pp.6, 2017, https://doi.org/10.12654/JCS.2017.33.6.06